Husqvarna 266XP with 48mm piston

[com]

Does everyone agree that the cylinder cant be cleaned up and reused? ( I hate throwing sh#t away)

Not now....

 

[RedneckChainsawRepair]

I cleaned this up and using right now. Not the p though. Just c.

 

[J D]

Does everyone agree that the cylinder cant be cleaned up and reused? ( I hate throwing sh#t away)

Pretty hard to tell from those pics... & even with good pic's it can be hard to say.
If the plating isn't obviously damaged I'd be inclined to have a go at cleaning it up. If that works smooth over any irregularities in the ports, re champher them & see how it runs with a new pistin & rings

 

[com]

Pretty hard to tell from those pics... & even with good pic's it can be hard to say.
If the plating isn't obviously damaged I'd be inclined to have a go at cleaning it up. If that works smooth over any irregularities in the ports, re champher them & see how it runs with a new pistin & rings

Plating is broken.
Deep scratches and only alum. body around intake port. Without cromeplating...

 

[com]

Now for me possible next variants.

Winzor Husq 268 - 50mm without decompressor hole

 

[com]

Next

FARMERTEC Husqvarna 268 - 50mm​

QG26850 (Husqvarna 503 61 10-71)​

 

[com]

Last

FARMERTEC Husqvarna 272 - 52mm​

HUS-272 QG27252 (Husqvarna 503 75 81 72)​

With decompressor hole

 

[HiOctane]

Be sure to have 272 intake spacer,bolts,etc { different from your 162 }before buying your cylinder.

 

[com]

Be sure to have 272 intake spacer,bolts,etc { different from your 162 }before buying your cylinder.

I have intake spacer for 272, and need decompressor - this not difficult to buy

 

[82F100SWB]

Go with a 266 style cylinder. Only 162/630 and 266 cylinders will fit under your top cover without spark plug interference. It also uses the same intake block you already have.

 

[Bob Hedgecutter]

Now for me possible next variants.

Winzor Husq 268 - 50mm without decompressor hole

Winzor? Is that like the Sthil suff?Close but not quite?