Huztl FarmerTec 070 Build Thread with upgrade info and completed saw

[Bedford T]

I finally heard from that guy. They are in no hurry to answer

Hello, no tracking number, sometimes it is a bit longer.

greeting

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

I finally heard from that guy. They are in no hurry to answer

Hello, no tracking number, sometimes it is a bit longer.

greeting

kit info & packing lists @ http://thechainsawkitguy.com

I just shot him a message and asked about it being different without the e clips and how do I set it up. See what he says.

 

[Bedford T]

We just buy the other parts. We will replace the entire unit. The unit we bought was 29$ locally. Now order the connected bits from your local shop. We bought what shows in the ipl. It's not an odd part.

kit info & packing lists @ http://thechainsawkitguy.com

 

[Bedford T]

I will wait I told I get my part and take it in and say I need the other parts. That way I am assured in the end I got what is needed

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

I will wait I told I get my part and take it in and say I need the other parts. That way I am assured in the end I got what is needed

kit info & packing lists @ http://thechainsawkitguy.com

Hum my IPL. Shows only the pin with e clips style? I have 2 different ipl's. An 070 and 090?

 

[Bedford T]

Hum my IPL. Shows only the pin with e clips style? I have 2 different ipl's. An 070 and 090?View attachment 652931 View attachment 652932

It's the same. Except the cylinder size. I sent you both so you would have them. Check the part# we bought against either

The gearing is different on some 090. Decomp is same

kit info & packing lists @ http://thechainsawkitguy.com

 

[Bedford T]

#10 on 070 we bought

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

#10 on 070 we bought

kit info & packing lists @ http://thechainsawkitguy.com

Woohoo awesome I see it now! Ok great I will drop by stihl dealer and get the parts coming. Thanks!

 

[golddredgergold]

Its still looks like the e clip pin type in the picture but if the part number are right I will see what I get.

 

[Bedford T]

I based my purchase on his part number. I got the part # off the ipl and went shopping. That's why I said drop it by.

kit info & packing lists @ http://thechainsawkitguy.com

 

[Bedford T]

I mentioned info is hard to come by. This thread and my videos become the record.

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

Yes not much info out there for sure and my wonderful Stihl dealer does not know anything about these saws.

 

[Bedford T]

I don't have the part. You do. Call Stihl customer service and ask for technical Services. Do not tell them you have a kit saw. You can say you have a box of old 090 parts and the decomp is missing. You bought one off eBay and need to understand what additional parts you need your local guy knows nothing

kit info & packing lists @ http://thechainsawkitguy.com

 

[Bedford T]

Might have to wait till monday

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

Good plan! Hope your arrives soon to.

 

[Bedford T]

Me too.

kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

Hey Bedford back at page 1 you had posted the 6 shoe clutch. Did hutzl make this ever or is that a Stihl only part? Ones on eBay are pricy! $250+ everywhere.

 

[Bedford T]

Hey way back on page 1. Lol

Stihl part. You can get them for 150-180 out of Germany. If you want one I will help you find it.

If you get one you will want a Stihl sprocket so you know it's round. The lining can come off from heat build up. Sprockets are not much.



kit info & packing lists @ http://thechainsawkitguy.com

 

[golddredgergold]

I will run the stock one for a little bit and decide if its worth it or not. Lets see how this one mills. I just ordered a pile of goodies from huztl. I got an extra clutch cover so I can cut around the outside like Will Malloff suggest in his milling book.

 

[Bedford T]

I show mine somewhere. Had a guy that owns this huge machine shop make one. He stopped the shop and he cut it for me charged me 20$. It was perfect. He though it was cool. I think it works great. Keeps that clutch much cooler

It's somewhere in this thread

kit info & packing lists @ http://thechainsawkitguy.com