I saw it on Ebay/Craigslist

[MnSam]

husqvarna chain saws

Pick up only, in Florida. But currently at only $.99

"4 good parts saws SOME STILL RUN GOOD BARS"
http://cgi.ebay.com/husqvarna-chain-saws-/140486207413?pt=LH_DefaultDomain_0&hash=item20b5a167b5

 

[blsnelling]

Just read this which puts things in a better perspective: http://www.arboristsite.com/showthread.php?t=156671


Ron

That still leaves him making $250 for a bar, if it goes for the BIN price.

 

[Eccentric]

That still leaves him making $250 for a bar, if it goes for the BIN price.

Yep. He also listed that Homelite bar you posted a pic of (in your 1050 thread) for more money than the last one he sold. Seems to be his M.O...


I'm trying (with only limited success) to bite my tongue here. I've made comments about this fellow's bar auctions in this thread before....

 

[Plankton]

Antique Military chainsaw - $600

This is a reed prentice chainsaw made in Worcester ma,built in the early 1940's for the military. But not your typical chain saw. It is a 2 man saw it is Pnuematic runs off of compressed air ,saw is in excellent condition take a look asking 600/ bo saw runs great from what i can tell hooking it up to a small belly compressor

http://nh.craigslist.org/atq/2051402687.html



I don't know much about 2-man or military saws but that looks like a good collectors item, Maybe not worth $600 but a pretty neat saw.

 

[o2man98]

Ok good people, I just called the seller and arranged to pick up (14) of the cases tomorrow. I will figure out what it costs me to find a box (each) and will be happy to ship to folks on AS until I run out of them. First come, first served. $15 per case + actual cost to pack and ship UPS.

I think my wife takes Paypal or something, will advise.

Cheers,

Beowulf

I would be interested in 1 or 2 shipped to 54220.

Thanks a lot!

 

[Beowulf]

Stihl Saw Cases

I would be interested in 1 or 2 shipped to 54220.

Thanks a lot!

AS Folks, I picked up my allotment of the new Stihl saw cases this morning. Looks like there are maybe 7 left unspoken for.

Picked up a few cardboard boxes at the UPS store to pack them in (yikes, carboard is more valuable than I thought!)

Will check out the best shipping method that I can reasonably access and will pm the shipped cost to the folks that have asked for one or more.

Any leftovers will end up on e-bay next week.

They look like they will accommodate up to a 20" bar, but have the removable bar scabbard setup. I can set my MS660 in one, but the lid does not close. I think an MS460 would probably fit, and anything smaller should fit, for sure.

Cheers!!!
Beowulf

 

[Rudedog]

AS Folks, I picked up my allotment of the new Stihl saw cases this morning. Looks like there are maybe 7 left unspoken for.

Picked up a few cardboard boxes at the UPS store to pack them in (yikes, carboard is more valuable than I thought!)

Will check out the best shipping method that I can reasonably access and will pm the shipped cost to the folks that have asked for one or more.

Any leftovers will end up on e-bay next week.

They look like they will accommodate up to a 20" bar, but have the removable bar scabbard setup. I can set my MS660 in one, but the lid does not close. I think an MS460 would probably fit, and anything smaller should fit, for sure.

Cheers!!!
Beowulf

I guess its probably not a good idea to look a gift horse in the mouth but did he divulge the tail on how he came upon these?

 

[Jacob J.]

That still leaves him making $250 for a bar, if it goes for the BIN price.

Yep. He also listed that Homelite bar you posted a pic of (in your 1050 thread) for more money than the last one he sold. Seems to be his M.O...


I'm trying (with only limited success) to bit my tongue here. I've made comments about this fellow's bar auctions in this thread before....

I have some feelings about that as well, along with his $125 "ported" mufflers that are nothing more than a stock muffler with an extra hole and a $8 deflector bolted on.

 

[Meadow Beaver]

I have some feelings about that as well, along with his $125 "ported" mufflers that are nothing more than a stock muffler with an extra hole and a $8 deflector bolted on.

Speaking of J.B. mufflers, I bought an 066 dp cover off him for $38. I got it and not long after I opened the box the "nice paint peeled of to show plenty of rust.

 

[Beowulf]

I guess its probably not a good idea to look a gift horse in the mouth but did he divulge the tail on how he came upon these?

When I inquired, the guy said they were abandoned in one of his buildings. I'm guessing someone thought they would make a killing on E-bay, until they found out what it would cost to ship these bad boys...

I will PM the folks that expressed interest in these with shipping quotes, but with the cost of a box and shipping, they are not that cheap.

Cheers,
B

 

[Hagstar]

Southern NH- 18 Saws $200-

"I have 18 homeowner chainsaws that do not run. I don't have the time right now to fix them and just want to make some room in the shop. I am offering them forsale as a lot for $200 firm. Some of the saws are Husky 36, Husky 41, Stihl 015 etc."

http://nh.craigslist.org/grd/2097085447.html

John H.

 

[huskydude]

"I have 18 homeowner chainsaws that do not run. I don't have the time right now to fix them and just want to make some room in the shop. I am offering them forsale as a lot for $200 firm. Some of the saws are Husky 36, Husky 41, Stihl 015 etc."

http://nh.craigslist.org/grd/2097085447.html

John H.

i'm gonna pretend I didnt see this :biggrinbounce2:

 

[huskydude]

wtf is this

http://westernmass.craigslist.org/grd/2072179922.html

 

[Metals406]

That still leaves him making $250 for a bar, if it goes for the BIN price.

Yep. He also listed that Homelite bar you posted a pic of (in your 1050 thread) for more money than the last one he sold. Seems to be his M.O...


I'm trying (with only limited success) to bite my tongue here. I've made comments about this fellow's bar auctions in this thread before....

I have some feelings about that as well, along with his $125 "ported" mufflers that are nothing more than a stock muffler with an extra hole and a $8 deflector bolted on.

Speaking of J.B. mufflers, I bought an 066 dp cover off him for $38. I got it and not long after I opened the box the "nice paint peeled of to show plenty of rust.

Y'all need to read this: http://www.arboristsite.com/showthread.php?p=2614524#post2614524

 

[Hagstar]

http://westernmass.craigslist.org/grd/2072179922.html

It's an electric Mall- cool as well as heavy, cord weighs even more than saw. Price is right!

John H.

 

[GA_Boy]

Homelite Super Wiz 66

For you collectors. It looks freaking mint.

http://miami.craigslist.org/brw/tls/2094006002.html

 

[Mr. Bow Saw]

There going nuts over a Toy Stihl chainsaw.
Its not the better one too.
I got mine for $20. a few years ago

http://cgi.ebay.com/NEW-Stihl-TOY-C...541?pt=LH_DefaultDomain_0&hash=item35ae36534d

 

[D&B Mack]

There going nuts over a Toy Stihl chainsaw.
Its not the better one too.
I got mine for $20. a few years ago

http://cgi.ebay.com/NEW-Stihl-TOY-C...541?pt=LH_DefaultDomain_0&hash=item35ae36534d

I bought one for my daughter about 2 months ago and paid $50 including the shipping. Maybe I should put it back up there, still have the box.:computer: I could just tell her it is in the shop getting fixed.

 

[SkippyKtm]

This Guy is Definetely P*ssed!

http://boston.craigslist.org/sob/grd/2098649022.html

HUSQVARNA 288 CHAINSAW (QUINCY)
Date: 2010-12-06, 4:20PM EST
Reply to: [email protected] [Errors when replying to ads?]

This is directed to the bottom feeding, crawl out from under the rocks, F-----G pieces of S--T that broke into my truck at Town Fair Tire in Quincy. The only thing I want back is the Husqvarna 288 Chainsaw, you can do what ever with the rest. Get some balls you spinal , no #### scum bag & respond to this ad. I will meet you anywhere and if you kick my ass, forget it all. But if I splatter you brain all over, I want it all back.

My heart goes out to him, but I'm surprised it hasn't been Flagged yet!

 

[robfromaz1977]

NIB Husqvarna 385XP

http://cgi.ebay.com/Husqvarna-385XP-Chainsaw-/330501766078?pt=US_Chainsaws&hash=item4cf370bbbe