Jonsered Chainsaws

[Real1shepherd]

MMO isn't sold in Canada. Apparently they don't want to bilingualize their label so the Quebecois don't think it's cooking oil.

Score another one for Quebec.

What about Kroil...or does that sound too much like aluminum foil?

Kevin

 

[fossil]

I haven't seen Kroil in my travels. PB blaster we have. I have found in the past the ammonia will loosen rusty bolts but I wouldn't put it in a cylinder. Some guys use ATF.

I think if I had stuck rings, the cylinder would coming off.

 

[Real1shepherd]

I haven't seen Kroil in my travels. PB blaster we have. I have found in the past the ammonia will loosen rusty bolts but I wouldn't put it in a cylinder. Some guys use ATF.

I think if I had stuck rings, the cylinder would coming off.

My helpers in the past referred to PB Blaster as the 'as seen on TV' stuff in my truck....although I'm not sure it says that on the can anymore. There is something else to add to ammonia that makes a great rust penetrant, but I don't remember what that was now. Kroil is pretty great stuff and so is their price....I covet it more than I use it.

I agree...would be worried about the rust and the imprint on the cylinder wall. Would rather pull it & polish everything, given how easy that is on two-cycles.

Kevin

 

[Cantdog]

The machinist guys on here swear buy a 50/50 mix of acetone and ATF as the very best penetrant to free up rusted stuff..... Unc, (Stihl 041S) posted test results comparing all the favorites like PB Blaster, Kroil, Marvel Mystery etc. etc to the acetone mix.....it won hands down... I've used it and it does work very well...and cheap to make. Just a thought.....

 

[fossil]

The machinist guys on here swear buy a 50/50 mix of acetone and ATF as the very best penetrant to free up rusted stuff..... Unc, (Stihl 041S) posted test results comparing all the favorites like PB Blaster, Kroil, Marvel Mystery etc. etc to the acetone mix.....it won hands down... I've used it and it does work very well...and cheap to make. Just a thought.....

I had thought there was something you added to the ATF. Thanks for putting that up.

 

[Chris J.]

The machinist guys on here swear buy a 50/50 mix of acetone and ATF as the very best penetrant to free up rusted stuff..... Unc, (Stihl 041S) posted test results comparing all the favorites like PB Blaster, Kroil, Marvel Mystery etc. etc to the acetone mix.....it won hands down... I've used it and it does work very well...and cheap to make. Just a thought.....

That's good to know.

 

[Real1shepherd]

The machinist guys on here swear buy a 50/50 mix of acetone and ATF as the very best penetrant to free up rusted stuff..... Unc, (Stihl 041S) posted test results comparing all the favorites like PB Blaster, Kroil, Marvel Mystery etc. etc to the acetone mix.....it won hands down... I've used it and it does work very well...and cheap to make. Just a thought.....

Yeah, read that awhile back...that same concoction.

I've got a formula for the USC that is dynamite for cleaning hard things like injectors. Have to use a glass jar inside the water bath of the USC...same level in the jar that is in the bath, cover the jar. I've been looking again for the formula, but it's lacquer thinner, acetone and something else in the right proportions. I have a jar of it, but can't find the original formula...lol! You keep the jar covered and it minimizes the flash potential of the chemicals in the heated USC, so I'm told. I've never had any trouble.

Kevin

 

[jonsered 820]

Hey guys just curious never did much with the 70e,80,90 series but talking to guy a guy and going to pick up a saw from him and he's not sure on the model but says it has the decomp did the 70e's have decomp I tried asking if it had a plastic flywheel or not but the guy wasn't anywhere near the saw just wondering what models in that time frame had the decomp to at least narrow down on what I'm picking up

 

[leecopland]

90 has one.

 

[Real1shepherd]

Agreed...decomp makes it's most likely a 90, although could be an 80 with a 90 jug & slug conversion....common practice. Or an 801 with a 90 jug & slug conversion.

Kevin

 

[jonsered 820]

Alright that's the only thing the guy could tell me was it had a decomp he doesn't know much about saws add just said red chainsaw with set motor 20$ he sent me a pic and couldn't believe it wasn't a crappy old home lite

 

[leecopland]

Alright that's the only thing the guy could tell me was it had a decomp he doesn't know much about saws add just said red chainsaw with set motor 20$ he sent me a pic and couldn't believe it wasn't a crappy old home lite

Well go GET IT!

 

[Chris J.]

Alright that's the only thing the guy could tell me was it had a decomp he doesn't know much about saws add just said red chainsaw with set motor 20$ he sent me a pic and couldn't believe it wasn't a crappy old home lite

$20.00? Quit worrying about which Jred model it is, and

go

buy

it.

 

[jonsered 820]

Oh no there was no question about buying lol it just trying to figure out what model it is picked it up this morning not bad hoping to get it freed up new rings and just need a clutch cover and top covers and should be good to go

 

[B-N]

Pics or it didn't happen!

 

[Real1shepherd]

Betting it's a 90.....priced like we ALL wish we could buy them...lol!

Kevin

 

[Chris J.]

Maybe these links will help ID it as a 90.

Oh, I nearly forgot, a Jonsereds 90 for $20.00 earns you a much coveted:

You SUCK! lol


http://www.acresinternet.com/cscc.n...3dd448b41ed30e4788256b69007dac1a?OpenDocument


https://www.google.com/search?q=jon...0ahUKEwj0lpyG97DJAhVGOIgKHX8RDT4QsAQIHA&dpr=1

 

[Real1shepherd]

This is interesting, although it's a 52E, not a 59E:
http://www.ebay.com/itm/VINTAGE-jonsered-jonsereds-59E-59-E-

Kevin

 

[jonsered 820]

Well trying to upload an image but taking for ever I'll get one up a little later tonight

 

[jonsered 820]

Apparently my phone decided to work kinda out in the boonies right now service has been spotty lol