lets get Christmas started early this year

[Homelite410]

So since mike has been waiting with baited breath...

Where was my warning txt........... low on data had data off since 4...........

 

[procarbine2k1]

I'm going to hunt up some more goodies...

A good man you are Nate. Hope you have a good Christmas in your new place

 

[Wood Doctor]

God Bless, I hope that only people that are in need of one for heat, or to feed their family reply.

Exactly. They all heat their homes with firewood and stoves. One man discovered that a thief broke into his garage and stole his saw last month. He's disabled and a cancer survivor. When I told him that Santa Claus was going to make that up to him, tears came to his eyes. I bought an older 029 Super for him with a 20" bar, and got it running today. This saw still runs as nice as my 361 and should work well for him.

 

[DexterDay]

Exactly. They all heat their homes with firewood and stoves. One man discovered that a thief broke into his garage and stole his saw last month. He's disabled and a cancer survivor. When I told him that Santa Claus was going to make that up to him, tears came to his eyes. I bought an older 029 Super for him with a 20" bar, and got it running today. This saw still runs as nice as my 361 and should work well for him.

Good things come to good people

Good on you for your deeds. Rare in these times for people to give so much.

 

[nstueve]

Where was my warning txt........... low on data had data off since 4...........

Aww... I sent a txt warning.

 

[Homelite410]

Aww... I sent a txt warning.

Oh well I got some good stuff the other day!

 

[nstueve]

Here's a .325 care package for someone. 5gal Jred oil mix, 2 new 3/16 files, and a .325 chain up to 18" for next person to post their .325 chain specs.

 

[machinisttx]

Anyone need a clutch wrench for older Poulans? I had to make one to remove the clutch from a 306A parts saw today and can easily make another. I made mine with removable pins since I figured they would shear(they did, twice!) and I wanted to be able to knock out the broken ones to replace with new when that happened. 3/4" drive on one end with two pins on the other.

First PM gets one.


Edit: Claimed by MS460WoodChuck

 

[MS460WOODCHUCK]

050 72 325

 

[machinisttx]

Here's a .325 care package for someone. 5gal Jred oil mix, 2 new 3/16 files, and a .325 chain up to 18" for next person to post their .325 chain specs.

I'm running Stihl semi chisel .063 gauge .325 on my 290.

Too late anyway, but I forgot DL count.

 

[nstueve]

I'm running Stihl semi chisel .063 gauge .325 on my 290.

Too late anyway, but I forgot DL count.

Send me your addy and chain specs via PM and I'll send you a chain.

 

[machinisttx]

Send me your addy and chain specs via PM and I'll send you a chain.

Thank you sir, will do!

 

[Homelite410]

Very nice you guys!!

 

[nstueve]

Another chain up grabs. 28in or smaller 3/8 058.

First person to call it.

 

[DexterDay]

Edit... Doh.... .058. Never mind

 

[DexterDay]

I have a new aftermarket rear cover for an 036/360? .. Been on the shelf, so may have a scratch on it. But still very clean.

And two 026 OEM cyl. They are both scored, but after seeing what can be cleaned up? Pretty sure they may have life left?

 

[nstueve]

25" 3/8 x .50 84 DL stihl (will pay shippjng)

Sorry Charlie I called for 058 guage. I'm pretty sure after the last few give aways my 050 100' roll is gone.
I can dig up 1-2 good used ones if you'd like???

 

[Homelite410]

Another chain up grabs. 28in or smaller 3/8 058.

First person to call it.

Call brotha.... dibs dibs

 

[nstueve]

I have a new aftermarket rear cover for an 036/360? .. Been on the shelf, so may have a scratch on it. But still very clean.

And two 026 OEM cyl. They are both scored, but after seeing what can be cleaned up? Pretty sure they may have life left?

I'd take a shot on those 026 cylinders.

 

[nstueve]

Call brotha.... dibs dibs

Told you patients was a virtue and to stay tuned!

Send me your chain specs and addy via PM.