lets get Christmas started early this year

[DexterDay]

I'd take a shot on those 026 cylinders.

Sold to the man who has given much more than he has received.

PM me your Addy and they will ship Fri morn.

 

[Milkman31]

Ok I don't have much but I have asked and have taken from this thread so this is what I have husquvarna 40 parts just ask for the part that you would like

 

[MS460WOODCHUCK]

Here is a list of a few items to let go to a AS buddy that can use them...

1-New caber 272xp ring
2-Poulan 3400-4000 bucking spike
3-The same style of stump vise that Low Volt posted earlier. It is new also.
4-Large bucking spike for the PP330,380,3000 and such
5-Small bucking spike for the PP330,380,3000 and such
6-Almost new large set pretty sure they are the west coast version of 385-390XP spikes with the chain catcher and mounting screws. I think these fit the 372 also but not sure.
7-Two new save edge six sided files for square file
8-One new .050 60DL 3/8 round ground full chisel chain silver streak brand. I have not ran any of this chain yet but I will say it looks to be really sharp from the factory.

With the holidays so close and work so thin I can't cover the shipping on these items right now.

 

[MS460WOODCHUCK]

Ok I don't have much but I have asked and have taken from this thread so this is what I have husquvarna 40 parts just ask for the part that you would like View attachment 321986

Those side covers won't fit a husky 50 will they?

 

[Milkman31]

Those side covers won't fit a husky 50 will they?

I have no idea

 

[nstueve]

Dibbs on #7... Always wanted to learn the fine art of square hand filing!

 

[machinisttx]

Dibbs on #8.

I'll put up another tool up to the first PM. Your choice of either a 22mm x 1.5 flywheel puller or a 26mm x 1.5 flywheel puller.

 

[MS460WOODCHUCK]

I have no idea

Nope...they won't.

 

[PA Dan]

Haven't been into saws very long contracted CAD back in April at the Western PA gtg! I have a couple things to offer up if anyone can use anything let me know. First is a 14" Craftsman/Poulan bar.

Second is a set of covers from a Stihl 028 Super. They are not pretty but functional.

I also have some 032 parts from a couple saws I rebuilt.

 

[cobey]

i think thats an 041 mount

 

[firefighterwolf]

Dibbs on #3?

 

[bluesportster02]

Here is a list of a few items to let go to a AS buddy that can use them...

1-New caber 272xp ring
2-Poulan 3400-4000 bucking spike
3-The same style of stump vise that Low Volt posted earlier. It is new also.
4-Large bucking spike for the PP330,380,3000 and such
5-Small bucking spike for the PP330,380,3000 and such
6-Almost new large set pretty sure they are the west coast version of 385-390XP spikes with the chain catcher and mounting screws. I think these fit the 372 also but not sure.
7-Two new save edge six sided files for square file
8-One new .050 60DL 3/8 round ground full chisel chain silver streak brand. I have not ran any of this chain yet but I will say it looks to be really sharp from the factory.

With the holidays so close and work so thin I can't cover the shipping on these items right now.

i would like 6 if still available

 

[MS460WOODCHUCK]

i would like 6 if still available

They are yours.

 

[MS460WOODCHUCK]

Dibbs on #3?

It is your's.

 

[mitch95100]

I'll give a free Husqvarna or Stihl decal of your choosing to the first guy who claims it.


Sent from my iPhone using Tapatalk

 

[ladrhog]

stihl decal pleaae

Sent from my DROID RAZR using Tapatalk

 

[MS460WOODCHUCK]

Dibbs on #8.

I'll put up another tool up to the first PM. Your choice of either a 22mm x 1.5 flywheel puller or a 26mm x 1.5 flywheel puller.

PM me addy

 

[mitch95100]

stihl decal pleaae

Sent from my DROID RAZR using Tapatalk

Send me your addy. Will go out tomorrow!


Sent from my iPhone using Tapatalk

 

[machinisttx]

PM me addy

Working on pulling the flywheel off an 026, inbound shortly.

 

[MS460WOODCHUCK]

Working on pulling the flywheel off an 026, inbound shortly.

No hurry...it's going to take me a couple few days to get it all out anyhow.