nhawlman
ArboristSite Member
- Joined
- Dec 22, 2005
- Messages
- 55
- Reaction score
- 0
Mr. confused,
When that 1432 starts to leak oil from the cap (or before),
Cut a 1/2" piece of 3/4" copper water pipe.
then remove a 1/8" piece, leaving you with a "C".
Push that "C" into the neck of the Oil Tank
to keep the neck from collapsing
when you tighten the Oil Cap.
Make sure it fits tight and flush with the outside.
And bless the designer
every time you put gas under the Chain Brake Handle
Happy New Year,
Nevin
When that 1432 starts to leak oil from the cap (or before),
Cut a 1/2" piece of 3/4" copper water pipe.
then remove a 1/8" piece, leaving you with a "C".
Push that "C" into the neck of the Oil Tank
to keep the neck from collapsing
when you tighten the Oil Cap.
Make sure it fits tight and flush with the outside.
And bless the designer
every time you put gas under the Chain Brake Handle
Happy New Year,
Nevin
