McCulloch Chain Saws

[Kevin hayes]

Just added a 640 to the herd a few weeks back. Got it up and running tonight. All it needed was a new pick up line in the tank and it fired right up and idled with little effort. Makes my 359 look like a toy.View attachment 746276

sweet!! good looking saw..it may eat that husky so you might want to separate them

Sent from my VS996 using Tapatalk

 

[Kevin hayes]

Awesome. Its amazing how little a 32 looks on that big saw a 32 on my 800 seems huge.

Pretty stink video but anyway...


Constant cutting through knots is hard slow going. Hows the tune? Feels a tad rich but I'm happy with it like that on these big long cuts

yes sir your right got a 32 on my 8200 seems alot bigger on it...nice mac'n on that tree you should poor some epoxy on that and make a table or something wish i was with ya on that one..wasnt a bad video at all i thumbed ya on it

Sent from my VS996 using Tapatalk

 

[mogulmasher]

Yep they surely are a beastly saw for sure!

 

[Kevin hayes]

Yep they surely are a beastly saw for sure!View attachment 746279 View attachment 746280

Oooooo i like those spikes on it thats a mean looking saw you got there sir...can i have it

Sent from my VS996 using Tapatalk

 

[mogulmasher]

Yes it does have some serious bucking dogs on it for sure. Can't wait to sink it into some wood and see how it cuts!

 

[sawfun]

Yes it does have some serious bucking dogs on it for sure. Can't wait to sink it into some wood and see how it cuts!

If you like that dog, you should see the west coast version.

 

[Jethro 2t sniffer]

yes sir your right got a 32 on my 8200 seems alot bigger on it...nice mac'n on that tree you should poor some epoxy on that and make a table or something wish i was with ya on that one..wasnt a bad video at all i thumbed ya on it

Sent from my VS996 using Tapatalk

Cheers Kevin I probably should do a table it's all headed for the wood stove in two years time otherwise. It deserves to be milled really but I don't have that gear and probably not nice on the old 800 either. There is still new 3120s on the shelf at the husky dealer in town lol

 

[Kevin hayes]

Yes it does have some serious bucking dogs on it for sure. Can't wait to sink it into some wood and see how it cuts!

well dont forget to show and tell when you do

Sent from my VS996 using Tapatalk

 

[ThistleIA]

 

[mogulmasher]

That's awesome!

 

[fossil]

not sure ypu can read it properly but it says sandvik windsor chrome plated speed tip

Sent from my VS996 using Tapatalk

Nice!

 

[PogoInTheWoods]

Pretty stink video but anyway...


Constant cutting through knots is hard slow going. Hows the tune? Feels a tad rich but I'm happy with it like that on these big long cuts

That's an insane buck, Jethro. Not sure which had more determination, you, or the saw! I think the tune sounds good for that particular task. I'm surprised you made the whole cut on one tank of fuel. Bet it was close. I believe I would have pulled the bar out of the cut a time or two myself to clear chips and dissipate some heat..., and give my back a rest, of course! LOL

Good job.

 

[Jethro 2t sniffer]

That's an insane buck, Jethro. Not sure which had more determination, you, or the saw! I think the tune sounds good for that particular task. I'm surprised you made the whole cut on one tank of fuel. Bet it was close. I believe I would have pulled the bar out of the cut a time or two myself to clear chips and dissipate some heat..., and give my back a rest, of course! LOL

Good job.

Big rounds for sure been making use of the 32 before that was doing it with a 24 lol I noodle them into 4 with a 20 inch saw and then 2 people can carry a quarter lol. Yeah I get about halfway through the next one and I run out of oil she's manual only at the moment too well pretty much it mite almost oil a 16 lol so yeah welcome relief on the back and the thumb too when it runs out. That's the 3rd sharpening now on the stihl full chisel and it's getting better and better very happy with that chain

 

[Kevin hayes]

Big rounds for sure been making use of the 32 before that was doing it with a 24 lol I noodle them into 4 with a 20 inch saw and then 2 people can carry a quarter lol. Yeah I get about halfway through the next one and I run out of oil she's manual only at the moment too well pretty much it mite almost oil a 16 lol so yeah welcome relief on the back and the thumb too when it runs out. That's the 3rd sharpening now on the stihl full chisel and it's getting better and better very happy with that chain

hey did you video the rest of that tree.did notice you made sure the other mac was in there for all to see i was digging the pull start cover gave me an [emoji362]

Sent from my VS996 using Tapatalk

 

[edju1958]

Damn Jethro! That 800 has some balls.Lol Take care of it & it'll last you a lifetime.
Ed

 

[Jethro 2t sniffer]

Told you you need 1 Ed lol

No sorry Kevin got a few pics but not many
A couple inches shy of 6 feet at the stump

Messy bloody trees but good fun the whole thing and about 4 others not quite as big have been processed with old macs mainly maybe 10 percent with a small husky if that. Most limbing is done with 1 of 3 70cc macs. Oh and a poulan 4000 too.

Climbed this 1 about 5 meters with a 7-10 lol some of those are 16 to 20 inch lol.


Really enjoy cutting wood I'm working 65 hours a week lately most of saterday then all day Sunday have been cutting for a day of rest and relaxation lol

 

[PogoInTheWoods]

That's one helluva lot o' kindling right there. Bet that big stuff with all those crotches is a b**ch to split, too.

 

[Jethro 2t sniffer]

That's one helluva lot o' kindling right there. Bet that big stuff with all those crotches is a b**ch to split, too.

Yeah it's a bi#$h all right. Have been really spoiled to be honest with all the brush theres a 30T excavator coming along and clear the lot in a heap and put a match to it

 

[Kevin hayes]

Yeah it's a bi#$h all right. Have been really spoiled to be honest with all the brush theres a 30T excavator coming along and clear the lot in a heap and put a match to it

thats a awesome trunk jethro dang!! and nice presentation of your macs i just may be jealous..id send ya a oil pump for that 800 if you wasnt forever away

Sent from my VS996 using Tapatalk

 

[Jethro 2t sniffer]

thats a awesome trunk jethro dang!! and nice presentation of your macs i just may be jealous..id send ya a oil pump for that 800 if you wasnt forever away.

Sent from my VS996 using Tapatalk

Thanks mate its the thought that counts it probably just needs a clean out I have had it out and put a new disk in it from mark and was pumping great but after sitting a month or two it's got sad and now ive turned it up all the way but still sad. I have put some diesel in the oil so will see how it goes on sunday.