McCulloch Chain Saws

[clint53]

Jethro is here but he has been off the radar for a bit.

Big life changes at the moment im no longer with my wife n kid and am crashing at mates or with the new lady lol.

Glad your wife is home Mark.

My saws are all stashed at a mates safe n sound. Just kinda getting my feet grounded at the moment but I'm a very happy man now and hungry for life

Sounds like your head is plumb and level.
Just keep looking forward and never behind.
I wish you the best Jethro.

 

[Jethro 2t sniffer]

Sounds like your head is plumb and level.
Just keep looking forward and never behind.
I wish you the best Jethro.

Thanks mate.

 

[briguy26]

Hey fellas I have a couple of good running mcculloch titan saws, unfortunately the tanks leak gas badly. Is this common on these saws? It looks like they have a seam in the middle of the tank. Are they fused together or is there a gasket between the two sides. TIA

 

[Woodslasher]

About a week ago I tried my hand at porting the 1-43, based off of the article provided by @matt_lamb_160 but I didn't get around to posting pictures until tonight as I've been kinda busy. The past two nights I've been up till midnight or later getting saws and gear ready for work the next day so the Mac has taken the back burner pending spare time and parts arriving.

 

[clint53]

About a week ago I tried my hand at porting the 1-43, based off of the article provided by @matt_lamb_160 but I didn't get around to posting pictures until tonight as I've been kinda busy. The past two nights I've been up till midnight or later getting saws and gear ready for work the next day so the Mac has taken the back burner pending spare time and parts arriving.
View attachment 891923View attachment 891924View attachment 891925View attachment 891926View attachment 891927

Good job.
I'm about ready to port my first also.

 

[clint53]

I need a chain brake handle for my Mac 110 p/n 92479
Also a air filter cover p/n 91853

 

[matt_lamb_160]

About a week ago I tried my hand at porting the 1-43, based off of the article provided by @matt_lamb_160 but I didn't get around to posting pictures until tonight as I've been kinda busy. The past two nights I've been up till midnight or later getting saws and gear ready for work the next day so the Mac has taken the back burner pending spare time and parts arriving.

You might like this article too. Gives another option for additional ports (boost ports rather than the third port), pretty hard to drill with a fixed head, but still interesting.

 

[vinnywv]

I need a chain brake handle for my Mac 110 p/n 92479
Also a air filter cover p/n 91853

Clint i have both of those. They are yours. Pm me with details of adress and such. I can mail them out next week. Tuesday. You pay shipping.

 

[clint53]

Clint i have both of those. They are yours. Pm me with details of adress and such. I can mail them out next week. Tuesday. You pay shipping.

PM sent thanks bunches and bunches.

 

[clint53]

Anyone have the SKF CR seal part number for McCulloch P/N 83859 ?
It's the crankshaft seals for a Mac 110

 

[clint53]

Why would this not work?
There is no grove for the seal to fit into. It's a straight shaft and straight housing.
It's .045 less in width is the only difference.
My measurements for Mac seal # 83859

 

[heimannm]

SKF #4913. 4912 does not have the garter spring.

Mark

 

[heimannm]

Briguy - which Titan models? Most of the Titans model saws were built with molded/fused plastic fuel tanks.

Mark

 

[clint53]

SKF #4913. 4912 does not have the garter spring.

Mark

Thanks Mark.

 

[rarefish383]

Rather a tough week for us, Mrs. Heimann was admitted to the hospital on Monday with stomach pain, turned out to be pancreatitis. While struggling through that she's had heart rhythm problems, fluid building up around her heart and lungs, and breathing issues... Things seem to be on the mend now but she won't be coming home until Sunday or Monday.

I'll do my best to check in from time to time and help out if I can. Looks like you've been doing a good job without me.

This has come up on another site and via private mail here. Some info on saws sold down under.

View attachment 890740
View attachment 890738
View attachment 890739

Mark

Thoughts and prayers for both of you.

 

[edju1958]

Was that you who just got an SP81 Ed?

Yes,that was me,I'm really looking forward to sinking that 28 in.bar in some hard wood!

 

[ozziechainsaw]

Hi Guys,

Just thought I would share this with everyone. I got this saw last week. It's a McCulloch Pro Mac 6800 or as know here in Australia the Bumble Bee. Was made for McCulloch by Sachs Dolmar Germany. Nice saw and it runs nice to.

Haven't had much time yet to go through it or even give it a clean but I will shortly. Anyway have a look and let me know your thoughts.

Cheers
Justin

 

[clint53]

Hi Guys,

Just thought I would share this with everyone. I got this saw last week. It's a McCulloch Pro Mac 6800 or as know here in Australia the Bumble Bee. Was made for McCulloch by Sachs Dolmar Germany. Nice saw and it runs nice to.

Haven't had much time yet to go through it or even give it a clean but I will shortly. Anyway have a look and let me know your thoughts.

Cheers
Justin

I've never seen one before Justin.
What CC? I can't find any info on it.
Clint

 

[ozziechainsaw]

I've never seen one before Justin.
What CC? I can't find any info on it.
Clint

Hi Clint,

68cc with 8hp.

I will attempt to get some better photo's of it tomorrow for everyone.

Justin

 

[Marvin Booysen]

Interesting saw Justin, never seen one like that either, but looks solid!

I also got a new arrival last week

View attachment 892163
View attachment 892164
View attachment 892165

Its got a smaller muffler than the DE80, and I noticed that the previous owner (or someone) inserted two thin rectangular metal plates behind the cracked outer one.
I found an IPL online, which shows only two plates bolted to the muffler body: a sort of raised outer one, and only one below (same shape). Is this a common "fix", guess the originals got cracked and broken? What do you guys think?