McCulloch Chain Saws

[donthraen]

When you graduate elementary school and figure out what a real 5 & 6 cube saw is then we can talk. until then I'm done derailing the Mac thread.

what a 600-d -- 35-a isn't good enough how about a d65 not only big but powerful and heavy --- elementary school that's funny --- I know its hard to match wits with another fore you maybe you will get some soon

 

[1375619cm3]

heres what the ipl reads on the 1-51View attachment 180351

 

[dieselsmoke]

Sawbones, It's good to see that it really is a small world. Man there are many Amboy stories, from the 70's. But Back to saws..
I made it out to my Dad's farm today, with a couple saws...
Heading out.

Mac 790, just finished cutting..

Mac S 250

My Dad struggled with the small buttons on the camera, so we lost a few pics. The 790 ran good, has power, and sounds awesome.

 

[RandyMac]

I would say it probably wasn't a 900evl you ran as they are much different then say a 302. But that's all i'll say as this is not the echo thread. BUT just incase randy is watching opcorn:opcorn:opcorn:

 

[RandyMac]

You do indeed have a reason for that grin.

 

[Wildman1024]

Your to funny randy. I bet you would have liked it 100 times better then your stihl you ran.

 

[dieselsmoke]

You do indeed have a reason for that grin.

Kinda cheesy pic, but that saw is a hoot to run..I was never really happy with the power of my 740, but this one has some snot. I've got some work to do on that chain tho.

 

[Rounder]

This popped up on C-list this morning. Had to have it for the bar alone.
Piston is rusted tight in the cylinder, looks like someone left it in a bucket of water...Grrrrrr.

Top cover says 790, but the gear drive says otherwise. Can't get a bore measurement in it's current rusted state.

Looking at the bottom of the block, Left side is stamped 63629, Right side is stamped 2412.

Any ideas? 890 or 895 I assume.

Enjoy your Sunday

Thanks, Sam

View attachment 180405

 

[RandyMac]

895 Sam. Need an IPL?

Quite a bar.

 

[Rounder]

895 Sam. Need an IPL?

Quite a bar.

Nice, I've got the 1-76 IPL which should suffice - Sam

 

[Mr. Bow Saw]

This popped up on C-list this morning. Had to have it for the bar alone.
Piston is rusted tight in the cylinder, looks like someone left it in a bucket of water...Grrrrrr.

Top cover says 790, but the gear drive says otherwise. Can't get a bore measurement in it's current rusted state.

Looking at the bottom of the block, Left side is stamped 63629, Right side is stamped 2412.

Any ideas? 890 or 895 I assume.

Enjoy your Sunday

Thanks, Sam

View attachment 180405

Nice saw Sam.

 

[rwoods]

This popped up on C-list this morning. Had to have it for the bar alone.

Enjoy your Sunday

Thanks, Sam

View attachment 180405

I hope you didn't get pulled over on the way home for not having a flag or a pilot vehicle. Great find. Ron

 

[RandyMac]

I hope you didn't get pulled over on the way home for not having a flag or a pilot vehicle. Great find. Ron

I got a ticket for over length load on a motorcycle with a 797 strapped on it.

 

[promac850]

I got a ticket for over length load on a motorcycle with a 797 strapped on it.

:hmm3grin2orange: :msp_thumbsup: That's simply badass.

That's the way to roll.

 

[rwoods]

I got a ticket for over length load on a motorcycle with a 797 strapped on it.

Couldn't happen to anyone else.

Ron

 

[leeha]

Thats a great find Sam, Well worth a full rebuild.
The 1-76 may share some parts but not everything.
I have seen over size pistons on ebay from time to time.



Lee

 

[Rounder]

Thats a great find Sam, Well worth a full rebuild.
The 1-76 may share some parts but not everything.
I have seen over size pistons on ebay from time to time.



Lee

Thanks Lee. P/C are in horrible condition, severe corrosion internally. Not sure what I'm going to do. I'd like to get both saws back in running condition, but your 797G's have put bad thoughts in the back of my head. Lol.

I'll let ya know what happens - Sam

 

[leeha]

You might be surprized Sam. The cylinder
might clean up with a .030 over bore.
There strong runners for 103cc's especially
with the 3-1 gear. All torque.
What chain is on it.

Lee

 

[donthraen]

This popped up on C-list this morning. Had to have it for the bar alone.
Piston is rusted tight in the cylinder, looks like someone left it in a bucket of water...Grrrrrr.

Top cover says 790, but the gear drive says otherwise. Can't get a bore measurement in it's current rusted state.

Looking at the bottom of the block, Left side is stamped 63629, Right side is stamped 2412.

Any ideas? 890 or 895 I assume.

Enjoy your Sunday

Thanks, Sam

View attachment 180405

that things bigger than your car I have a truck send it to me

 

[Duke Thieroff]

Anyone have a set of rings for a Mac 1-76/1-86?

Chris