McCulloch Chain Saws

[heimannm]

Super nice saw! Pardon my ignorance here, was the problem with the rope diameter, or material, or both?

Both. Polypropylene is not really a good choice for a starter rope, not as tough as nylon in this application and you could only get a few wraps on the starter pulley due to the large diameter.

Mark

 

[altatim]

Can anyone ID this saw? Its a bit down the road from me but if I knew what it was I might go for a drive.

 

[Rocker59]

Early 10-10, they had a right hand starter. The fuel tank upper half is unique to the 10-10.

 

[mopar4u]

Hi everyone

Ive come up with a list of needed parts (prefer used parts) for my mcculloch 250 project, is ebay the best or only source?

Mark i did private message you this list as well.


Top mount Stop switch assy
Bar, any condition
Chain, any condition
Spike with hardware 51443
Carb collector with hardware 58922
Carb control grommet 53277
Fuel line from carb to fuel tank
Fuel Cap

 

[Rotax Steve]

Can anyone ID this saw? Its a bit down the road from me but if I knew what it was I might go for a drive.
View attachment 1232699View attachment 1232700

Looks like a Super 10-10 or possibly a Super 6-10 with the muffler.

 

[heimannm]

I have your message and will look it over next week.

Mark

 

[Yubi]

Yubi - Alan is correct, I just glanced at the all yellow saw and made an assumption...

This is a 440 with the "non Super Series" type engine and shroud. They generally came with a RH starter as shown here.

View attachment 1232304

That saw you show is indeed a Super Series engine design with LH starter and the somewhat special 1/2 wrap type handlebar. The only Super Series that I have encountered with a LH starter is the 795L but they had a different color scheme here in the US. You probably need to investigate that saw further as it seems to be somewhat unique. It would be very interesting to know the model number stamped on the bottom of the crankcase.

Mark

It might be different because I am living in Austria (a small country in Europe). In Europe we never really had full wrap handles. I was thinking of buying those two McCullochs. But the seller is asking 330€ for 4 Chainsaws that I could pick from a pile. This is to much for me as getting parts for McCullochs in Europe is nearly impossible. Thank you guys for trying to help me find the models