MS 362 Muffler Mod?

hardpan · Apr 13, 2012

When you retuned did you remove the limiters or use a special tool to adjust H and leave the limiters in place? Some say it is difficult to tune a strato by listening for 4-stroking.

rattler362 · Apr 13, 2012

epalmerson said:
Hey Rattler362 wondering what tools or how you opened up that stock port under the deflector? Did you do it from the inside/outside or both?

Thanks

I used a Dremel and a carbide burr and yes i did open it up from both sides if you need to use a spark screen just dont grind the slot out.Oh and be sure to wear glove's when you do the mod the muffler.

rattler362 · Apr 13, 2012

hardpan said:
When you retuned did you remove the limiters or use a special tool to adjust H and leave the limiters in place? Some say it is difficult to tune a strato by listening for 4-stroking.

Yes you have to remove the limiter cap just use a corse drywall screw to remove the cap retune and replace the cap.Yes for me they are a bit harder to hear 4 stroking but just listen you will hear it.

bert0168 · Apr 13, 2012

Anthony_Va. said:
Well if theres no baffle in it then you should not have any problems.

All I know is that when I had mine off, I could turn it and see out the other side.

There is a deflector in there but there is not a separate baffle chamber.

The outlet port probably is somewhat restrictive. Once I added the second outlet, I seem to have gotten more torque out of it and it cuts faster.