Justin Saunders
New Member
- Joined
- Jul 3, 2024
- Messages
- 1
- Reaction score
- 0
I just picked up an MS194T from ebay. I replaced the spark plug, cleaned the air filter, and did my best to set the carb to manual specs then minor adjustments. With the choke on (choke blade fully opened), the saw runs great. I have it idling, no bog off the bottom end and revs out really nice. The problem is as soon as flip the choke off (choke blade closed) the saw dies essentially immediately. This is my first saw but I've owned dirt bikes for a while so I'm not new to small engines or carbs. My immediate thought is I just had my H and L adjustments off but nothing I do to them get the saw to even idle with the choke off.
- My carb adjustment limiters are still on, H is 1/8 turn out. L is 1/4 turn out.
- Fresh CMR6H plug (old plug had a nice tan color)
- Fresh non ethanol fuel mixed with stihl's recommended 2 stroke oil.
I've done my best to youtube and goggle answers but I'm coming up blank!
Any ideas would be much appreciated!
- My carb adjustment limiters are still on, H is 1/8 turn out. L is 1/4 turn out.
- Fresh CMR6H plug (old plug had a nice tan color)
- Fresh non ethanol fuel mixed with stihl's recommended 2 stroke oil.
I've done my best to youtube and goggle answers but I'm coming up blank!
Any ideas would be much appreciated!