Need Help 359 hard starting hot

[minkota1]

I could use some help from you fellas with a bit more experience. I have two Husky 359's one e-tech and one non e-tech. Both saws run great most of the time, but sometimes when they're hot ( like when you stop to refuel and try to go right back to work) they act like they're starving for fuel. you have to choke them to get them to fire, and they'll run for a second or two and die. If you can get them to once rev up, they run fine. this only happens after they're hot. By the way, it's not only after refueling, sometimes if you shut the saw off and then try to restart it will do the same thing. Like I said it sure seems to me that they are starving for fuel. Any help would be much appreciated.
Thanks in advance, Minkota1:help:

 

[Mtnman4ever]

I could use some help from you fellas with a bit more experience. I have two Husky 359's one e-tech and one non e-tech. Both saws run great most of the time, but sometimes when they're hot ( like when you stop to refuel and try to go right back to work) they act like they're starving for fuel. you have to choke them to get them to fire, and they'll run for a second or two and die. If you can get them to once rev up, they run fine. this only happens after they're hot. By the way, it's not only after refueling, sometimes if you shut the saw off and then try to restart it will do the same thing. Like I said it sure seems to me that they are starving for fuel. Any help would be much appreciated.
Thanks in advance, Minkota1:help:

Try pulling the choke opuit all the way .Husky seem to cool down faster thn Sthils It might be that or makesure your spark plugsare clean and air filtersare clean too all the regular stuff .
, I find my 394 dose not do this but my newer Huskys do a similar thing . notsure why butoh yeaH hu the newer Huskls need the decoprsion valve pushed in to get them to start or that is my experince with them .


lao make sure youar using a good clean fuleand probper mix th newwer husklysare temper,mental abpout fuel mix iuse huskyysstuf and foloow dritions to a T with my 575 and polesaws .