Nik's Poulan Thread

[RedneckChainsawRepair]

I'm fresh out of chainsaws to work on

Come on over I will pull some projects off the shelf for you to work on. :msp_wink:

Lets see 425 505 another 505 3300 3500 236 in poulans off the top of my head.

 

[RedneckChainsawRepair]

$0.25 haircuts. with real barbers.

I still got real barbers around here for $9

 

[redunshee]

$0.25 haircuts. with real barbers.

Gosh, Jerry I don't even remember that and I'm almost older than dirt.
Bob

 

[redunshee]

I gave it an honest shot before asking for help, but I am having a tough time finding 3.7 rings. Randy's engine repair has them listed, and I have a call in as to thick or thin.
I think I have the thin, as they are thinner than my 3.4. NLA at Sears and Partstree. Not listed at Caber. Does anyone have the size of the ring, and is it available for other small engines. Looking for a place to cross or buy a non specific ring that size. Thank you for any help.

I have an old set I mice at .023.in or .59mm. thick. Diameter is roughly 1.871in. or 47.86mm. However they are worn so the Oem size I'm not sure.
Bob

 

[Modifiedmark]

I still got real barbers around here for $9

Seems like a waste of money on that head dont it?

(sorry I couldnt hold back.)

 

[Modifiedmark]

Ok I useally don't post these here but thought you guys deserved them better then the C/L thread.

Poulan Pro S 25 AV Chain Saw

Poulan 3000 16"bar & Poulan 2700 18" bar Chainsaws for sale 80 OBO eac

1966 poulan model 86 26" bar $150 obo

Poulan 3000 Chain Saw

3050 poulan chainsaw and case new

 

[rms61moparman]

Ok I useally don't post these here but thought you guys deserved them better then the C/L thread.

Poulan Pro S 25 AV Chain Saw

Poulan 3000 16"bar & Poulan 2700 18" bar Chainsaws for sale 80 OBO eac

1966 poulan model 86 26" bar $150 obo

Poulan 3000 Chain Saw

3050 poulan chainsaw and case new

Well the S25AV is on it's way to Kentucky!!!


Mike

 

[Acornhill]

Ok I useally don't post these here but thought you guys deserved them better then the C/L thread.

Poulan Pro S 25 AV Chain Saw

Poulan 3000 16"bar & Poulan 2700 18" bar Chainsaws for sale 80 OBO eac

1966 poulan model 86 26" bar $150 obo

Poulan 3000 Chain Saw

3050 poulan chainsaw and case new[/url

that 3000 lot is a deal!! stop teasing me Mark.

 

[Showme]

Roller Nose Bar

I just bought a nice NOS roller nose bar for Poulan. What would it be correct on? I'm thinking I don't really have anything of the correct era.

 

[67L36Driver]

This seller has a bunch of Poulan Pro branded bars (NOS) listed on the evilbay. The BIN and shipping seem reasonable to me.

benbell5809 | eBay

I scooped up a couple 24" Pioneers.

 

[Showme]

Yes he does. I bought an Oregon for a Pioneer a few weeks ago. Looks like he's put many more out than he first offered and raised his prices a tad.

 

[a. palmer jr.]

Come on over I will pull some projects off the shelf for you to work on. :msp_wink:

Lets see 425 505 another 505 3300 3500 236 in poulans off the top of my head.

I'm familiar with the 3500..got one on ebay right now that I put together. I work on other people's saws sometimes but mainly I just putter around with parts saws, recycling them into ones that are usable. If you were a little closer I would be glad to tie into some of those fine saws. I prefer to work when it's warm though....

 

[zogger]

Gosh, Jerry I don't even remember that and I'm almost older than dirt.
Bob

Not a quarter but I remember 35 cent hair cuts and the same for a double feature indoor movie.

Meh...the hundred buck rides at the local used car lots were a better deal...

 

[RedneckChainsawRepair]

Well the S25AV is on it's way to Kentucky!!!


Mike

Thats the one that caught my attention too.

What cc are they?

 

[RedneckChainsawRepair]

I just bought a nice NOS roller nose bar for Poulan. What would it be correct on? I'm thinking I don't really have anything of the correct era.

I seen 2 of those NOS FS too. I had no clue what they fit so I didnt bother. So what do they fit?

 

[RedneckChainsawRepair]

I work on other people's saws sometimes but mainly I just putter around with parts saws, recycling them into ones that are usable. I prefer to work when it's warm though....

Sounds like you described me too. :msp_biggrin:

 

[rms61moparman]

Thats the one that caught my attention too.

What cc are they?

38cc


Mike

 

[RedneckChainsawRepair]

38cc


Mike

I was afraid thats what you would say. :msp_ohmy: 38cc with AV would be sweet.

 

[rms61moparman]

I was afraid thats what you would say. :msp_ohmy: 38cc with AV would be sweet.

How about PORTED 38cc with AV???:msp_scared:


Mike

 

[RedneckChainsawRepair]

How about PORTED 38cc with AV???:msp_scared:


Mike

hopefully I can run it at a gtg :msp_biggrin:.

Heck I'm impressed with the stock s25da :msp_cool: