I officially booked a ticket today. I am coming!!!!! Newark, NJ to San Fran, Ca.
I am going to try to ship at least one muscle saw out there to play with.
I am going to try to ship at least one muscle saw out there to play with.
Nor Cal & North SF Bay GTG (November 11-14, 2022)
- Thread starter BrocLuno
- Start date
Help Support Arborist Forum:
Eccentric
Mister Wizard
Got your voice mail while I was at work. Great news JP! I'll save some room in my truck for your saw(s).
ckelp
just being myself
just take a saw as a carry-on...
i almost had a 051av in my bag coming back from rome :msp_sneaky:
BTW aaron come pick up your god dam saws.. and drop off a HL63
Last edited:
I'd wait until after Sunday's meeting to make that decision. It all depends on how many sites Ranger Jones has set aside. If it's only a few, then I'd book one. If she has ten or more off-line, I'd guess you to do the Friday thing ... In any case, we'll find someplace to put everyone
I'd wait until after Sunday's meeting to make that decision. It all depends on how many sites Ranger Jones has set aside. If it's only a few, then I'd book one. If she has ten or more off-line, I'd guess you to do the Friday thing ... In any case, we'll find someplace to put everyone
The website for the park said that there was no water available to fill RV tanks. Is that still true?
Eccentric
Mister Wizard
I was waiting for you to clear customs. Really I'm surprised you weren't grabbed by the TSA, or by the Pietro Beretta security staff for having 'sticky fingers' during a factory tour.:jester:
I'll bring your carb and adapter to the GTG meeting tomorrow (Noon at the park office....remember?). Bring the dirty little Poulans. Feel free to bring that 48" Mac bar too...
ckelp
just being myself
I was waiting for you to clear customs. Really I'm surprised you weren't grabbed by the TSA, or by the Pietro Beretta security staff for having 'sticky fingers' during a factory tour.:jester:
I'll bring your carb and adapter to the GTG meeting tomorrow (Noon at the park office....remember?). Bring the dirty little Poulans. Feel free to bring that 48" Mac bar too...
i went though TSA twice coming back (thanks to american airlines
umpkin2 the only thing they cought is i was trying to smuggle prosciutto and salami and they pulled it due to it was pork:msp_mad:
bretta alredy knew that i was comeing and ducted taped my hands and my mouth :taped:
also i drive 125 miles and did it in less then an hour and half... that includes the driveling 20mi on the back roads to the highway:cool2: about 110MPH all the way down the A1..
and the odd thing was i was geting passed my cops and other cars...
Jon1212
Riff Raff Fart Knocker from other Forum's.
i went though TSA twice coming back (thanks to american airlines
the only thing they cought is i was trying to smuggle prosciutto and salami and they pulled it due to it was pork:msp_mad:
bretta alredy knew that i was comeing and ducted taped my hands and my mouth :taped:
also i drive 125 miles and did it in less then an hour and half... that includes the driveling 20mi on the back roads to the highway:cool2: about 110MPH all the way down the A1..
and the odd thing was i was geting passed my cops and other cars...
Did you really just write that the folks at TSA "pulled your pork"? I've heard they have wandering hands, but that's ridiculous.
ckelp
just being myself
yea it was weird the guy did a cavity search and had both his hands on my shoulders :msp_ohmy:
one thing i knew and got reinforced about the TSA "agents" they have way too much authority for earning minimum wage and they need to watch a video on public perception, they can watch it just after the 45min video on how to be a TSA agent...
[video=youtube;Aq-G4HATiC8]http://www.youtube.com/watch?v=Aq-G4HATiC8&feature=player_detailpage[/video]
i think i ran into both these ladeys at miami :msp_tongue:
Eccentric
Mister Wizard
Well I feel like an idiot (once again)...
I'd marked down today (Saturday 10/06) as our meeting day in my calendar. Showed up for the meeting today (late)........and after waiting around by myself for an hour plus finally realized that the meeting is TOMORROW (Sunday 10/07). Bruce even said "Sunday's meeting" TWICE in his last post and I'd missed it until I went back and read his post again just now. Guess I can go home and try again tomorrow....:msp_confused:
I'd marked down today (Saturday 10/06) as our meeting day in my calendar. Showed up for the meeting today (late)........and after waiting around by myself for an hour plus finally realized that the meeting is TOMORROW (Sunday 10/07). Bruce even said "Sunday's meeting" TWICE in his last post and I'd missed it until I went back and read his post again just now. Guess I can go home and try again tomorrow....:msp_confused:
ckelp
just being myself
atlest your able to drop off that small hunk of unobtainium:biggrin: thanks again
Eccentric
Mister Wizard
You're welcome Dave. Thanks for the old Poulan stuff and the bar. Hope to see you tomorrow. Bring tools, as we may be putting the knives in the chipper as well.:msp_thumbup:
ckelp
just being myself
at this point i don't think i'll make it, it's like this 7 months pregnant + pneumonia = bad....
Eccentric
Mister Wizard
I didn't know she had pneumonia. Stay home and take care of the Mrs....:msp_thumbup:
Check your email. I sent you some Poulan SM's.
ckelp
just being myself
thanks, i still need to figure out how install the starter rope without the "anchor button"
i'm gunna go hit up that guy that likes the neon green saws:cool2:
Eccentric
Mister Wizard
The pully has a small hole 180deg out from the 'anchor button' hole that is intended for a regular rope with a knot. On the saws that use a rope with an 'anchor pin', you can make a pin out of a small finishing nail. Hold the nail with some pliers and heat the end. Then push it through the rope about 1/8"-1/16" from the end, pinning it to the bench. After the nail and melted nylon has cooled a tad slide the rope up the nail unti it's at the head. Cut the nail about 1/16" from the rope and install the rope into the pulley through the anchor hole with the head of the nail away from the center of the pulley hub.
ckelp
just being myself
mark took care of me..
off topic can you give the addy for the site that has all the mcculloch i've seem to missed placed it...:msp_rolleyes:
off topic can you give the addy for the site that has all the mcculloch i've seem to missed placed it...:msp_rolleyes:
Untrue - we have plenty of water. We didn't used to as the spring was in bad shape. But we got that taken care of about a month ago and we are now making plenty good water
We generally don't make a hose bib (HB) available (we have plenty of ADA faucets around), but for any GTG participant, I can get the HB key and hook you up. Real good water. Almost the same spring water quality that they used to bottle at Calistoga Water
Last edited:
Oooppsss ... If you find yourself there with no one, call Rob on his cell. He is usually there at his residence (in the park).
Untrue - we have plenty of water. We didn't used to as the spring was in bad shape. But we got that taken care of about a month ago and we are now making plenty good water
We generally don't make a hose bib (HB) available (we have plenty of ADA faucets around), but for any GTG participant, I can get the HB key and hook you up. Real good water. Almost the same spring water quality that they used to bottle at Calistoga Water
Thanks for the update. I was going by the information posted on the park website.
