Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Better yet just get a 562 xpw and be done!
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Oliver1655
Addicted to ArboristSite
Morning all. Had some stiff winds last night & a little rain but not bad overall.
Temperature this am only got down to 35°F so no ice or frost.
After today, we have 3 days in the mid 60's coming. We will have a great day for cutting wood this Saturday!
Or to put it in pictures:
= 
Temperature this am only got down to 35°F so no ice or frost.
After today, we have 3 days in the mid 60's coming. We will have a great day for cutting wood this Saturday!
Or to put it in pictures:
= 
Hedgerow
HACK
We need a coffee drinking smiley...
Mornin all...
Mornin all...
We have today to endure and then some good weather coming. We had a frog strangler last nite when the cold front moved in.
I got to get down to Jim's early before I give up the family bus. Blondie needs it to shuttle grandkids. Pesky buggers.
Bet Jim was out in the pouring rain feeding his wood heater...............................
I got to get down to Jim's early before I give up the family bus. Blondie needs it to shuttle grandkids. Pesky buggers.
Bet Jim was out in the pouring rain feeding his wood heater...............................
I'm in.
Mo. Jim
Addicted to ArboristSite
Ditto on the coffee smiley, I love that big one over in that site we won't mention.
diggers_dad
Sawchologist
True...
But a half key will make the throttle response more like a husky...
The 64cc's will do the rest..
Weld some material in the right places, and get a little more ...
I'm no great fan of Husky, but they do have a nice throttle response. They spool up quick and strong.
diggers_dad
Sawchologist
Mo. Jim
Addicted to ArboristSite
I lucked out, it wasn't raining when I went out around 11:00 and stoked the ole wood hog for the night. Give me a call and let me know when your coming south
awol
ArboristSite Guru
My slaves and I should be able to make it to the cut on April 5. After all, it's only a few miles from home! I can bring a tractor with forks if needed.
Hedgerow
HACK
I need to scrum up some more slaves for this one...
Hedgerow
HACK
I need to scrum up some more slaves for this one...
Oliver1655
Addicted to ArboristSite
Our slaves have gown & become emancipated.
Wish I could make it. I could bring a truck load, maybe 2.
Good morning fellow sawyers.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Good morning boyz!
diggers_dad
Sawchologist
I agree!
Good morning boyz!
I used one of your chain vises last night to rework some chains for my Dad. I don't know how many cutters are supposed to be on a 14" Stihl chain, but his were several shy. Two out of three chains were suitable for the trash can and I had to make two runs with a grinder to get the third to where I could file it and put a good edge back on it. That chain vise you made sure is handy. I've done everything from his picco chains to my full chisel 3/8ths.
dd
Hedgerow
HACK
I got some nephews I'll try and volunteer into service..Our slaves have gown & become emancipated.
workshop
Addicted to ArboristSite
Thanks to Mo.Jim I have the 360 ready for a test. Also the 10-10. If I just had a test log.........................................
