M
moody
Guest
I'm 70 miles from 71 :/
here's that peaky 395 I've told you about
Sent from my SM-N900V using Tapatalk
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
I'm 70 miles from 71 :/
here's that peaky 395 I've told you about
Sent from my SM-N900V using Tapatalk
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
272xpeeee
rdtreewalker
arboristsite window licker
It has torque for days.
Hedgerow
HACK
Steve... I need you to text me the address in Mansfield...
Your # is missing off my phone...
Your # is missing off my phone...
Hedgerow
HACK
Cool!! Mr. Spencer is gonna be there??
Sunfish's supersplit would be handy too...
Just sayin...
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
So wish I could make it. I'd even bring alex's splitter too!
diggers_dad
Sawchologist
I'm in for April 5th. I'll have two small helpers with large appetites. May 3rd is a little "iffy". We'll see when it gets closer.
Steve, are you cutting somewhere this weekend? Need help? My wife is out of town Saturday and I might be able to cut a few hours.
dd
workshop
Addicted to ArboristSite
I had planned on some cutting Friday after work, but could easily put it off till sometime Saturday.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Give that bad boy some ign timing!! 1/4 key is a good start!
cobey
Addicted to ArboristSite
Matt will tell you on a clamshell a muffler mod you can go BIG! and he's right
when I did the 390 we had a pipe with a 3/4 inside diameter.it runs real good! the exhaust hits a deflector and then go's out the pipe but its real strong!! im sure yours is real good too steve
i wouldnt have chose that pipesize but its what my buddy wanted, i figured if it was too big I could block some of the hole off.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
File off the leading edge of the key in the direction of rotation.
Hedgerow
HACK
Go a little more...
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
But not too far......
It will make it better but won't change the fact that its a stihl!
diggers_dad
Sawchologist
I was hoping for some saw time this weekend. I talked to my Dad earlier and may have to do some electrical work for him instead. Won't know for sure until Thursday. The boys and I will be into something. Your place isn't THAT far of a drive and I could use some serious saw time. My Jred and Makita are screaming to get out of the basement.
Don't hold up your plans for me, I'll try to give you a holler by Thursday.
dd
workshop
Addicted to ArboristSite
OK, Thursday it is.
Hedgerow
HACK
True...But not too far......
It will make it better but won't change the fact that its a stihl!
But a half key will make the throttle response more like a husky...
The 64cc's will do the rest..
Weld some material in the right places, and get a little more ...
