Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[RVALUE]

I can (barely) see 4 icons (?) on the bottom of each post. What is that????

 

[WKEND LUMBERJAK]

On a side note I love the Avatar.

That is from the last GTG at RV's thanks to Sawnami I love it.

 

[Work Saw Collector]

I can (barely) see 4 icons (?) on the bottom of each post. What is that????

It is something to do with braging about this site on other sites like twiter and digg and others.

 

[Freehand]

No these were RMC 3/8 .050 semi chisel for the 361s I cut dirty wood with those two more than the other saws most have RS chain on them.

Ah,shoulda asked if they were for work or pleasure

 

[Work Saw Collector]

Ah,shoulda asked if they were for work or pleasure

I got another 36" bar for the 056 Mag few weeks ago its got 3/8 .063 full comp RSC I don't know if that saw will pull it or not, it looks funny beside my two skip 36" chains.

 

[RVALUE]

I got a bunch of .o63 chain. Even some rolled into 36 inch. Doesn't fit my 36 inch bar.

 

[Work Saw Collector]

I got a bunch of .o63 chain. Even some rolled into 36 inch. Doesn't fit my 36 inch bar.

I have been wanting to get a breaker and spinner, so I can do my own chains. Shorten and lengthen some chains. I need to be buying some tools and less saws.

 

[RVALUE]

I need the next size smaller.

Logging told us that $ 320 was too much for a roll. What can you get it for?


You need to come get these chains....

 

[Work Saw Collector]

I need the next size smaller.

Logging told us that $ 320 was too much for a roll. What can you get it for?


You need to come get these chains....

I don't know, I have always bought it a loop at a time. On the chains lets compare at the GTG

 

[Work Saw Collector]

I was thinking on a chain class. I don't know enough, but we can all add knowledge. Put all the chains in a row. Full comp, half skip, full skip, semi chisel, full chisel, and my favorite square ground.

 

[sawnami]

As far as pitch examples, I usually have saws with 1/4",.325", 3/8"lo pro, 3/8", 7/16" and 1/2". Also got a length of 3/4".

 

[atvguns]

I was thinking on a chain class. I don't know enough, but we can all add knowledge. Put all the chains in a row. Full comp, half skip, full skip, semi chisel, full chisel, and my favorite square ground.

That sounds great

 

[ARsawMechanic]

As far as pitch examples, I usually have saws with 1/4",.325", 3/8"lo pro, 3/8", 7/16" and 1/2". Also got a length of 3/4".

The chain class sounds good to me!

 

[Work Saw Collector]

As far as pitch examples, I usually have saws with 1/4",.325", 3/8"lo pro, 3/8", 7/16" and 1/2". Also got a length of 3/4".

Thats cool.

 

[Echo Kid]

Efco 152

I'm thinking about getting a efco 152 arent they a good saw

 

[jerrycmorrow]

they are made by Efco, the maker of Olympyks. a good professional saw manufacturer. if i didn't already have four 50cc saws i'd probably get one too. They come with a 5 year warranty for new saws. If you get a used saw you should ask about your rights to the remaining warranty.

 

[jerrycmorrow]

what's happened here? the reps are back. in color

 

[RVALUE]

I'm not sure why, and it isn't because it is scared, but my 372 is running exceptionally well. Starts fast, runs well, and cuts like a , real well.

Go figure.

 

[RVALUE]

No it didn't hear there are more stihls coming to keep it company......

 

[RVALUE]

The chain class sounds good to me!

Not me, sounds too complicated.

Keep it to the saw class. However, the correct split would be smart.

Maybe 45 - 55 etc. rather than 40 - 50 etc.

Should a 268 be in the same class as a 272?