Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[lumberjackchef]

I could not get warm in my shop, so I gave up.

Some of that dry oak actually went out (so it seemed) in the stove.

I've had a similar experience today. It is mighty COLD!!! I can't seem to burn my fire hot enough to get it over 40 in my shop either, and that windchill sucks!!:rant:

 

[teacherman]

Teacherman are U ready for the -20 wind chill.This will put a dent in the wood pile.

The furnace has not run for three and a half days. I was gone all Saturday, so it ran a bit then I'm sure, but it was 58˚ in the house when I got home from work, after getting a real blaze going before I left. I may need to clean the chimney, because I can't seem to stoke it like it used to do ten years ago. But I'm comfortable. Used up all the seasoned wood I had before we went out cutting, and am into the hedge pretty well. It is way cold, and I am happy to stay inside. I spend a lot of time fussing with the fire and wood and such, but I can thumb my nose at the gas company, thanks to you. :yourock:

One thing that helps my stove do its job is that a couple of years ago I ran some 2" PVC from the outside to right behind the stove. It provides combustion air without creating drafts. I put a cap over it when not in use. It makes a difference. I may stuff some hardware cloth in the pipe to keep mice and such out .

 

[sawnami]

ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Hey......................................................
where is everybody!!!!!!!!!!!!!:confusedn::confusedn:
Or...........maybe I'm in:

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/NzlG28B-R8Y?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/NzlG28B-R8Y?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[Stumpys Customs]

ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Hey......................................................
where is everybody!!!!!!!!!!!!!:confusedn::confusedn:
Or...........maybe I'm in:

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/NzlG28B-R8Y?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/NzlG28B-R8Y?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Sup,Mr.Nami
You'd figure with all th bad weather this place would be busy.

 

[sawnami]

Howdy Stumpy!

I think I found the ultimate GTG toy.

A scale model B-29 with a deployable X-1 rocket plane under it's wing.
4-80cc two stroke engines and a 21' wing span
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/GtIL_VjBUGo?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/GtIL_VjBUGo?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[Stumpys Customs]

Howdy Stumpy!

I think I found the ultimate GTG toy.

A scale model B-29 with a deployable X-1 rocket plane under it's wing.
4-80cc two stroke engines and a 21' wing span
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/GtIL_VjBUGo?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/GtIL_VjBUGo?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

I'll bring the porting tools!!!!!!

 

[Work Saw Collector]

I'm still around just been busy and didn't have anything good to add to the thread.

 

[Freehand]

Howdy Stumpy!

I think I found the ultimate GTG toy.

A scale model B-29 with a deployable X-1 rocket plane under it's wing.
4-80cc two stroke engines and a 21' wing span

Steve,that was really cool.I kept thinking Chuck Yeager was gonna step out the cockpit of that thing:flag:

 

[john taliaferro]

lumberjack you should consider a bb kit, with a seat built in . or maybe a duel power with your work bench in between two large stoves . their should be a smilley face with ice cycles hanging on his rear.

 

[RVALUE]

My new saw didn't run very well today.

 

[logging22]

sorry to hear that Dan. What saw is it?

 

[atvguns]

My new saw didn't run very well today.

as in not running right or not living up to your expectations

 

[Echo Kid]

Whats up got a running echo top handle 280e for 5 bucks

 

[atvguns]

Whats up got a running echo top handle 280e for 5 bucks

that ain't fair

 

[Stumpys Customs]

that ain't fair

Some people have that kind of luck.

Hows that Husky workin out fer ya? I see it didn't make yer sig.

 

[Echo Kid]

are you talking about that efco i put on here that was just the picture of it on ebay it hant ended yet

 

[atvguns]

Some people have that kind of luck.

Hows that Husky workin out fer ya? I see it didn't make yer sig.

Well I purchased a 044 a few days after the Husky cant seem to grab anything else when I head for the woods I am still thinking about getting the 262xp piston for the husky or !! I may just sell it I dont know I will atleast keep it till the gtg someone may have something to trade for it. I need to update the sig. I am looking for a rear handle tank assemble for the 044 if you run across one cheap let me know

are you talking about that efco i put on here that was just the picture of it on ebay it hant ended yet

I didn't see a picture I thought you had bought a running saw for 5 bucks I cant find a dull chain for that price

 

[Stumpys Customs]

Well I purchased a 044 a few days after the Husky cant seem to grab anything else when I head for the woods I am still thinking about getting the 262xp piston for the husky or !! I may just sell it I dont know I will atleast keep it till the gtg someone may have something to trade for it. I need to update the sig. I am looking for a rear handle tank assemble for the 044 if you run across one cheap let me know

I didn't see a picture I thought you had bought a running saw for 5 bucks I cant find a dull chain for that price

I'm also in need of a 044 tank (customers saw).

 

[atvguns]

I'm also in need of a 044 tank (customers saw).

one on fleebay $50 has crack but not to bad I am waiting for one that is perfect like me:hmm3grin2orange:

 

[Stumpys Customs]

one on fleebay $50 has crack but not to bad I am waiting for one that is perfect like me:hmm3grin2orange:

The one I've got should be good enough fer ya, it's got a hole from a thrown chian.:bulgy-eyes: