Part ID from diagram

[STOVE]

Looking at the 026 diagram and the anti vibe buffers have two different numbers associated with them. My handle is the center plastic one. Not sure if that helps date the saw.

Which numbers do I pick ? Is that number on the rubber buffer itself for me to see if I pull the current ones off?

 

[Bob Hedgecutter]

Without consulting paper service manuals- generally, two part numbers for the same AV buffer regards two different compounds of the material used to mould them- one being "standard" the other being a bit stiffer for a more rigid feel.

 

[atpchas]

Per the IPL: 1, 2, 3 are normal; 4, 5, 6 are soft.
Presumably 1-3 will make the saw less "floppy" while 4-6 will be a tad less "vibey."

 

[STOVE]

Per the IPL: 1, 2, 3 are normal; 4, 5, 6 are soft.
Presumably 1-3 will make the saw less "floppy" while 4-6 will be a tad less "vibey."

Man I am really starting to like this place. First I get the confidence to go after a saw. Next I get all the documents for parts and procedures, now I get clarification on said docs. What a wealth of knowledge this place is