Trev Arm
New Member
- Joined
- Aug 24, 2024
- Messages
- 1
- Reaction score
- 0
Hey all … my trusty saw that’s never missed a beat is playing up abit .
Started over revving with no throttle yesterday and would not start ..
read forums here & stripped down & found carb nuts loose hanging out …
Tightened all up expecting result .
Good news is it starts again easy.
Not so good it still revs high at idle … idle screw has no impact ..
Any ideas folks??
Revs out fully superbly just doesn’t return to idle
Maybe I missed something when at it ?
Can I continue to use in meantime ?
. Appreciate your help . I’m no expert but have good interest in it all
Cheers
Big T
Started over revving with no throttle yesterday and would not start ..
read forums here & stripped down & found carb nuts loose hanging out …
Tightened all up expecting result .
Good news is it starts again easy.
Not so good it still revs high at idle … idle screw has no impact ..
Any ideas folks??
Revs out fully superbly just doesn’t return to idle
Maybe I missed something when at it ?
Can I continue to use in meantime ?
. Appreciate your help . I’m no expert but have good interest in it all
Cheers
Big T
