Partner Chainsaw Thread

[ray benson]

can i use the same bar plates Ray for the Husky Bar
Peter

I looked up the bar on Baileys bar selector and it came up Doo9 mount. Looked at ebay australia and they have some Carlton 36" bars along with some crazy knockoff bars.

 

[peter92]

I looked up the bar on Baileys bar selector and it came up Doo9 mount. Looked at ebay australia and they have some Carlton 36" bars along with some crazy knockoff bars.

can you send me the address for the 36'' bar here in aust Ray
Peter

 

[ray benson]

can you send me the address for the 36'' bar here in aust Ray
Peter

They have .058 and .063 bars - about 3 pages of 36" bars
https://www.ebay.com.au/sch/i.html?_nkw=chainsaw+bar+36&ssPageName=GSTL&_pgn=2

 

[peter92]

They have .058 and .063 bars - about 3 pages of 36" bars
https://www.ebay.com.au/sch/i.html?_nkw=chainsaw+bar+36&ssPageName=GSTL&_pgn=2

Thanks Ray ,Ill check it out Now
What times it there
Peter

 

[ray benson]

Thanks Ray ,Ill check it out Now
What times it there
Peter

8:16am when you asked. 9:38am now.

 

[peter92]

8:16am when you asked. 9:38am now.

12.40 am here Ray

 

[Huskybill]

On eBay the doo9 Husqvarna 36” bars and chains are affordable with new chains some are $79.

 

[peter92]

chasing pn for the decomp valve for the p100 as mine doesnt have one in it just a blank cap
Checked with blokes here in Australia and even the Mc 1000 doesnt have one
with my stuffed shoulder i really need one
so any one got it please send to me
Peter

 

[Huskybill]

Vintage older roller nose partner bars?.. I found these on eBay. Bought a few for my vintage partner saws. A piece of Partner chain saw bar history. Keep your partner orginal Incase the chain saw vintage police show up lol. Not much of this stuff I see that’s available in unused, new condition.

https://www.ebay.com/itm/NOS-Partner-chainsaw-15-roller-bar-058-gauge-3-8-pitch-/192898574835

Check out his other items he has longer bars with roller noses.

 

[peter92]

Vintage older roller nose partner bars?.. I found these on eBay. Bought a few for my vintage partner saws. A piece of Partner chain saw bar history. Keep your partner orginal Incase the chain saw vintage police show up lol. Not much of this stuff I see that’s available in unused, new condition.

https://www.ebay.com/itm/NOS-Partner-chainsaw-15-roller-bar-058-gauge-3-8-pitch-/192898574835

Check out his other items he has longer bars with roller noses.

after 24'' upwards
Peter

 

[Huskybill]

Are these the orginal roller nose bars for what year and model partner saws? I purchased the 16”/22” roller nose bars.

 

[peter92]

Are these the orginal roller nose bars for what year and model partner saws? I purchased the 16”/22” roller nose bars.

for the Partner 100

Reference:

09
Carlton:

81
Oregon:

D005
Windsor:

EM or HP
GB:

HVP or HW
Tsumura:

OEM:

Comments:

PARTNER/ELECTROLUX MOUNT

 

[Huskybill]

Oregon D009 is a husky large mount bar. I hope these bars fit my 500, r16, p85 partners.?

 

[peter92]

Oregon D009 is a husky large mount bar. I hope these bars fit my 500, r16, p85 partners.?

but acres says its D005 , not d009

 

[Huskybill]

Sorry. Doo5 but baileys says doo9? Are they interchangeable?

 

[Huskybill]

I was just researching through acresinternet looking at the different Partner saw specs. I noticed the semi pro saws have nickasil cylinders, while the pro saws have chrome lined bores. Anyone ever check this out?

 

[peter92]

I was just researching through acresinternet looking at the different Partner saw specs. I noticed the semi pro saws have nickasil cylinders, while the pro saws have chrome lined bores. Anyone ever check this out?

just found out the 24'' husky bar will fit perfect on p100 /1000

 

[peter92]

just found out the 24'' husky bar will fit perfect on p100 /1000

the p100 /1000 take a large mount husky bar and this is how its done"" I drilled two small holes and filed the holes out to the bar groves to take the oil the bottom bar is the Husqy bar, the top bar is a 22'' Oregon Bar, it needs to be done the same, the 22'' is the only Oregon Bar my local dealer could get, so got the 24'' off a Husqy dealer.""

 

[Huskybill]

That’s great to know. I’m not fond of the small oil hole that feeds the bar oil.


I always thought the Swedish saws would fit and interchange in the larger bar mounts. I purchased my son a jonsered 910e only to find out the bar mount is different too. I purchased him a extra new bar with three chains.

 

[peter92]

That’s great to know. I’m not fond of the small oil hole that feeds the bar oil.


I always thought the Swedish saws would fit and interchange in the larger bar mounts. I purchased my son a jonsered 910e only to find out the bar mount is different too. I purchased him a extra new bar with three chains.

Just found out my saw is a R440T
what does the T stand for