Pioneer chainsaws

[p61 western]

All I need is more Boost Port ...https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/143134054516


Sent from my iPhone using Tapatalk

Seen that kind of expensive for a used cylinder. Sup Erik?

 

[Drptrch]

Seen that kind of expensive for a used cylinder. Sup Erik?

Couldn’t be better. Dealing with backed up septic into 2 bathrooms and hallway then p-Trap got knocked off of kitchen sink, then dishwasher drained all all over kitchen and dining room. It’s been Great.
But it’s not Raining : ))

And you ??

Received my 650 from Dana @kz1000 but no play time yet

Hell of a packing job, box even had hardwood floors !!

Sent from my iPhone using Tapatalk

 

[p61 western]

Couldn’t be better. Dealing with backed up septic into 2 bathrooms and hallway then p-Trap got knocked off of kitchen sink, then dishwasher drained all all over kitchen and dining room. It’s been Great.
But it’s not Raining : ))

And you ??

Received my 650 from, but no play time.


Sent from my iPhone using Tapatalk

I'm doing pretty good no complaints really. Hopefully your septic is fixed asap.

 

[Drptrch]

I'm doing pretty good no complaints really. Hopefully your septic is fixed asap.

Just about Moto-cross time [emoji4]

You ever go over to Prairie City to ride or watch the VORRA off road races

I raced there once upon a time; 2-seat buggy for several years


Sent from my iPhone using Tapatalk

 

[p61 western]

Just about Moto-cross time [emoji4]

You ever go over to Prairie City to ride or watch the VORRA off road races

I raced there once upon a time; 2-seat buggy for several years


Sent from my iPhone using Tapatalk

Don't really get over there very often. We mainly ride in Marysville. There is 3 tracks there when the oldest has his courage up on the crf250r.

 

[Drptrch]

Don't really get over there very often. We mainly ride in Marysville. There is 3 tracks there when the oldest has his courage up on the crf250r.

Saw the “Hurricane” there in late 70’s

Sent from my iPhone using Tapatalk

 

[ChainsawSeth]

Guys I've never heard of Boost Ports. Would this be an example?

Sent from my SM-G930VL using Tapatalk

 

[Acornhill]

Guys I've never heard of Boost Ports. Would this be an example?

Sent from my SM-G930VL using Tapatalk

No that is normal cylinder, go to YouTube and search for 655 boost port


Sent from my iPhone using Tapatalk

 

[ChainsawSeth]

Ill head over there now. Has my curiosity meter pegged.

 

[ChainsawSeth]

Neat video, but I couldnt find anything explaining what is boost port.

 

[Acornhill]

Neat video, but I couldnt find anything explaining what is boost port.

Honestly to me it is no big deal

that rectangle porting is the boost port


Sent from my iPhone using Tapatalk

 

[ChainsawSeth]

Im guessing it just adds a little extra power because its getting the air fuel mix in/out faster?

 

[Drptrch]

in Arizona

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/323706164777


Erik

 

[Acornhill]

in Arizona

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/323706164777


Erik

Crazy money if you ask me


Sent from my iPhone using Tapatalk

 

[Acornhill]

Do these actually go on a saw somewhere? I am being lazy today

Sent from my iPhone using Tapatalk

 

[Cookie]

Don’t look familiar. But I like them.

 

[ChainsawSeth]

So guys, apparently the new p60 cylinder was mislabeled. I'm guessing it's a cylinder for pp655 am I doomed here or will a flywheel and mag for a pp655 work.

Sent from my SM-G930VL using Tapatalk

 

[Joab]

So guys, apparently the new p60 cylinder was mislabeled. I'm guessing it's a cylinder for pp655 am I doomed here or will a flywheel and mag for a pp655 work.

Sent from my SM-G930VL using Tapatalk

It's a good idea to use some gasket maker or other goop to secure those square nuts in their slots.

I learned the hard way that if one rattles loose they will destroy a flywheel and the crankcase casting fins in 30 seconds or less.

I have used a blob of black permatex RTV and let it half dry before pressing it smooth with a finger and have found it effective.

This is not going to help with your question but I mention because I have not seen mention before on the thread, and it can prevent much heartache (and hunting for parts to replace the damaged ones ).

Envoyé de mon Moto G (5) en utilisant Tapatalk

 

[ChainsawSeth]

It's a good idea to use some gasket maker or other goop to secure those square nuts in their slots.

I learned the hard way that if one rattles loose they will destroy a flywheel and the crankcase casting fins in 30 seconds or less.

I have used a blob of black permatex RTV and let it half dry before pressing it smooth with a finger and have found it effective.

This is not going to help with your question but I mention because I have not seen mention before on the thread, and it can prevent much heartache (and hunting for parts to replace the damaged ones ).

Envoyé de mon Moto G (5) en utilisant Tapatalk

Thanks. I'll do that, if this whole build isnt doomed.

Sent from my SM-G930VL using Tapatalk

 

[Acornhill]

So guys, apparently the new p60 cylinder was mislabeled. I'm guessing it's a cylinder for pp655 am I doomed here or will a flywheel and mag for a pp655 work.

Sent from my SM-G930VL using Tapatalk

If you switched everything over I think it would work, flywheel coil cylinder etc


Sent from my iPhone using Tapatalk