Power Products Thread....any and all info welcome.

[ncrile]

You’ll have to identify the carb. Tillotson? The model will be stamped on the edge of the mounting flange.

 

[Kino B.]

Hello ncrile I checked the carb again and there is no model stamped on the carb flange. I used a wire brush amno nothing showing up. Only the bottom plate stamped with Lauson Power Products. I thought I saw somewhere on this site someone needed the same carb kit but they found an HL66A. I’d prefer to find the kit for this instead of going to another carb. Thank you

 

[67L36Driver]

Power Products/Tecomseh used the same carb kit like forever.

https://www.ebay.com/itm/323496608204

 

[sawnami]

It uses a pump element (the black rubber piece inserted into the carburetor flange). When they have a pump element, they usually have a check valve in the fuel inlet elbow. Don't use high air pressure on the elbow as it can damage the check valve. Use a 7/16" wrench to break loose the elbow then twist it out with a pair of pliers as it's a press fit. Use care in cleaning out the fitting. There's a good chance that the pump element will need to be replaced.

Sent from my SM-A716U using Tapatalk

 

[Kino B.]

Thank you guys. This is the check valve that you’re referring to?

 

[sawnami]

Thank you guys. This is the check valve that you’re referring to?

Yes.
Some also have a very fine screen that uses the surface tension of the fuel on it to act like check valve.

Sent from my SM-A716U using Tapatalk

 

[Kino B.]

Thank you very much for that info. I appreciate the support.

 

[Kino B.]

A David Bradley, Mono, and Barker. All AH-81's.

Sent from my SM-N950U using Tapatalk

Hi Sawnami, do you know approximately what year the orange David Bradley 81 is. Thank you!

 

[2broke2ride]

Hello gentlemen, I recently acquired a Mono AH81 and I’m looking for a rebuild kit for this carb. Does anyone have a part # or source for this? Thank you!

This kit includes the fuel pump element. It is that red piece.
https://www.ebay.com/itm/Oregon-49-...-/321458400717?_trksid=p2349624.m46890.l49286
Sent from my SM-G981U using Tapatalk

 

[sawnami]

Hi Sawnami, do you know approximately what year the orange David Bradley 81 is. Thank you!

Hello.
The orange David Bradley is a 1957 model.

Sent from my SM-A716U using Tapatalk

 

[Kino B.]

This kit includes the fuel pump element. It is that red piece.
https://www.ebay.com/itm/Oregon-49-...-/321458400717?_trksid=p2349624.m46890.l49286
Sent from my SM-G981U using Tapatalk

Thank you 2broke2ride. Member 67l36driver pointed me to the kit on eBay which should arrive soon. appreciate all yours support.

 

[Kino B.]

This kit includes the fuel pump element. It is that red piece.
https://www.ebay.com/itm/Oregon-49-...-/321458400717?_trksid=p2349624.m46890.l49286
Sent from my SM-G981U using Tapatalk

That’s a beauty, I like the curved edges of the blower housing which I don’t see as often on the AH81 engines.

 

[Kino B.]

So I found out why there was no spark on the AH81. I’m gonna clean this up ano see if there‘s still resistance in the winding. I may need new parts for this. Any recommendations?

In the cavities of the flywheel, wasps or some types of bugs created a home. They had covered up the openings with a white type of clay/mud which was very hard to break out.

Thanks!

 

[xl130]

Most of the time a good cleaning of the points is usually all it takes to make the system work again. Hopefully you get lucky!

 

[Kino B.]

Thank you XL130!