Project 371, replace crank!

[AUSSIE1]

Here is another video. 28" bar, this chain was really a piece of chit, and I hit something freakin twice with it, had to touch it up 2 times in half a tank of gas, guess that's what happens where there is crap lying around every where. Had a crappy time sawing today, the 28" bar I just put on my 046 the grooves are too tight and the dam chain kept slowing down, the kita 6401 I am running semi-chisel, took the rakers down like I normally do, but this chain didn't like it was was extremely grabby. So out of the 4 saws I brought I had troubles will 3 of them on the chains, the 4th was my 200t and only got run for a couple of minutes so I didn't count.

Do you ever just have one of those days?

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/G8ExnCj-3Kg&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/G8ExnCj-3Kg&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Yep and I had a crappy day yesterday.
Dropped a pin clip in the 385 which didn't go down too well.
Oh well you get days like that.

The 371 is running well Will.

 

[pioneerguy600]

Here is another video. 28" bar, this chain was really a piece of chit, and I hit something freakin twice with it, had to touch it up 2 times in half a tank of gas, guess that's what happens where there is crap lying around every where. Had a crappy time sawing today, the 28" bar I just put on my 046 the grooves are too tight and the dam chain kept slowing down, the kita 6401 I am running semi-chisel, took the rakers down like I normally do, but this chain didn't like it was was extremely grabby. So out of the 4 saws I brought I had troubles will 3 of them on the chains, the 4th was my 200t and only got run for a couple of minutes so I didn't count.

Do you ever just have one of those days?

To avoid days like that I take at least 10 fully serviced saws with me each day out in the woods. All Stihls!! LOL
Pioneerguy600

 

[TRI955]

Parrisw, I hope my saw turns out that good, that thing really runs!!!

 

[parrisw]

Yep and I had a crappy day yesterday.
Dropped a pin clip in the 385 which didn't go down too well.
Oh well you get days like that.

The 371 is running well Will.

Thanks AL, it might be going up for sale, I guy I know really wants it and needs a saw. Guess I'll have to do another.

Here is another video. 28" bar, this chain was really a piece of chit, and I hit something freakin twice with it, had to touch it up 2 times in half a tank of gas, guess that's what happens where there is crap lying around every where. Had a crappy time sawing today, the 28" bar I just put on my 046 the grooves are too tight and the dam chain kept slowing down, the kita 6401 I am running semi-chisel, took the rakers down like I normally do, but this chain didn't like it was was extremely grabby. So out of the 4 saws I brought I had troubles will 3 of them on the chains, the 4th was my 200t and only got run for a couple of minutes so I didn't count.

Do you ever just have one of those days?

To avoid days like that I take at least 10 fully serviced saws with me each day out in the woods. All Stihls!! LOL
Pioneerguy600

LOL, ya I shoulda brought all my saws yesterday.

Parrisw, I hope my saw turns out that good, that thing really runs!!!

Thanks man. You look like your doing really nice work so far.

 

[blsnelling]

Parris, that thing is haulin' the mail! Looks real strong!

 

[parrisw]

Parris, that thing is haulin' the mail! Looks real strong!

Thanks Brad, just wish I had a better chain on it last night, I just figured I'd use it that last time! LOL