Sachs Dolmar Chainsaws Thread

[leeha]

Get in touch with cuttingscott. He's a memeber
here and a Dolmar dealer in Greenwich NY.




Lee

 

[67 Mustang]

Tried to send message to 'cuttingscott' returns no such member's what did I do wrong!

It's Cuttinscott with no "g".

 

[psuiewalsh]

That is pretty common on that series of saws. The si versions had the top side exit and the tanks fared better.

I have used a couple layers of thick gauge aluminum tape with good results.

Lots of rubbing and plenty of heat from a good hot heat gun did the trick. Tried sanding it off, but the heat from the abrasives would just make it look worse.



Here's a really bad pic from the archives, 3/4" copper elbows 45 or 90 degree?

thanks for some more ideas. As to the front plate did you block it off to keep the exhaust from exiting there?

 

[sachsmo]

Done it both ways,

if your tank's already blistered no biggie eh?

 

[nstueve]

really... page 153 and no 153 photos... come on guys!

 

[leeha]

really... page 153 and no 153 photos... come on guys!

I would have, But with this new friggin Photobucket
i no longer can post pic's or videos.





Lee

 

[Warped5]

I would have, But with this new friggin Photobucket
i no longer can post pic's or videos.

Lee

I dunno, Uncle Lee ... I'm not having any problems with it.

 

[tdi-rick]

Get in touch with cuttingscott. He's a memeber
here and a Dolmar dealer in Greenwich NY.




Lee

Another dealer who is very good is Kyle from Edge and Engine in Cassadaga NY. (and he has an online shop)

I've bought quite a few spares from him, but you can't go wrong with either Scott and Steve (166 on here) from The Cutting Edge or Kyle from Edge and Engine.

 

[leeha]

I dunno, Uncle Lee ... I'm not having any problems with it.

Whats your secret Ted. I ain't figured this out yet
and have wasted much time on it.
Mind if i give ya a call.


Lee

 

[Warped5]

Whats your secret Ted. I ain't figured this out yet
and have wasted much time on it.
Mind if i give ya a call.


Lee

Let me throw something together and send it to you.

Unable to get to phone in about :10.

 

[leeha]

Sounds good Ted.





Uncle Lee

 

[Warped5]

Sounds good Ted.

Uncle Lee

Email sent ....

May just as well go to YouTube for posting your vids. Darin has been working on getting PB vids to work, with no luck that I know of.

 

[tdi-rick]

Whats your secret Ted. I ain't figured this out yet
and have wasted much time on it.
Mind if i give ya a call.


Lee

Lee, do you have some sort of anti-scripting component in your browser ?

I run No-Script in Firefox and it pretty much blocks everything from the new PB making it almost unworkable.

I run anti-scripting as a matter of course, purely as an anti-virus or anti-malware pre-emptive and it also allows most all pages to load much faster is it automatically blocks a lot of ads too, which is a nice side benefit.

I just avoid trying to view anything on PB now, it must be so script heavy that it's just a PITA with my browser setup.

 

[gmax]

PB still works for me but I prefer the old one

 

[leeha]

Lee, do you have some sort of anti-scripting component in your browser ?

I run No-Script in Firefox and it pretty much blocks everything from the new PB making it almost unworkable.

I run anti-scripting as a matter of course, purely as an anti-virus or anti-malware pre-emptive and it also allows most all pages to load much faster is it automatically blocks a lot of ads too, which is a nice side benefit.

I just avoid trying to view anything on PB now, it must be so script heavy that it's just a PITA with my browser setup.

I'm not sure what no-script is. I just have Norton anti virus.
I used to be able to post videos with no problems. Seems now
i can't do either.



Lee

 

[gmax]

Lee, I would remove Norton anti virus I find It blocks too much (safe websites and even internet connections), just use AVG free edition.
Firefox with the add-on "Adblock Plus" will take care of ads.

 

[Warped5]

McBob, I've been looking around and still can't find it ..... please re-post that Mac brochure showing the saws Sachs-Dolmar made for Mac. Thanks!

 

[gmax]

 

[ausneil 1]

PB still works for me but I prefer the old one

Wayne, i found an old muffler the other day looking for stuff, its the same as that 166 dolly you have there. If you want it its yours, i do not have any dolmars (but there on my wish list).

edit,,,,
How did you get hold of such informtion ???

 

[Warped5]

Thanks Gmax!