Scrounging Firewood (and other stuff)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I had a sudden sharp pain in my upper lip. A piece of the top of the wedge became shrapnel and was stuck in my lip. . .

What is somewhat annoying is I had recently ground the mushroom off the wedge to prevent such a thing from happening. Upon inspection it turns out there was a fracture a bit back from the edge that broke. Grind those mushrooms off guys… and inspect what’s left!
Thanks for the insightful reminder. Easy to get complacent with simple things like a sledgehammer, after using ‘dangerous’ tools like chainsaws.

Philbert
 
Little scrounge from today at the neighbor's - all dead standing ash, cherry, apple, and a few pine poles. No wheelbarrow documentary - my 13 year old helped and it was easier to get her to with the four wheeler and mini trailer. View attachment 986686
🍎 :baba::sweet::baba:,
 
I had a painful reminder today about the need for PPE while working… Much of this wood I split with a Bison splitting axe. However, rounds with knots often needed the application of a steel wedge. Upon hitting the wedge one time I had a sudden sharp pain in my upper lip. A piece of the top of the wedge became shrapnel and was stuck in my lip. A bit higher with no glasses and that could have been as serious eye injury. As it was the shrapnel was easily removed with my fingers… the bleeding stopped quickly
I have had similar things happen when breaking large rocks with a 16 lb sledgehammer. Luckily, I always knew to wear eye protection, but still shards of stone (granite) have cut my arms, legs and face.

It is a good idea to wear long pains, long sleeve shirts and a face mask (like on my felling helmet) when performing such duties.
 
I have had similar things happen when breaking large rocks with a 16 lb sledgehammer. Luckily, I always knew to wear eye protection, but still shards of stone (granite) have cut my arms, legs and face.

It is a good idea to wear long pains, long sleeve shirts and a face mask (like on my felling helmet) when performing such duties.
And those little shards will fly A LONG ways.
 
I think I’ve mentioned before that there are a number of old pine snags in the woods behind my cabin… Back when they logged in 1912, they actually burned all their brush in piles and some of the smaller trees that weren’t cut were burned with these piles. What was left was stumps from 4 to 10 feet high that were loaded with a heavy amount of pitch and as a result they are still solid over 100 years later. You can shave them with a knife and light with a match.
 
What type of setup do you have to use it with the forced air?
It has several heat circuits. One goes to the manifold for in floor heat and one goes to an air handler. Air handler looks just like a furnace except instead of having a burner and heat exchanger, it just has basically a radiator. Hot water from the boiler goes through it and the forced air picks up that heat and sends er down the duct work. Air conditioning in there too. It works well and handles the whole upstairs
 
I took my daughter and grandson (who turned 13 on Sat) Turkey hunting Fri and Sat. up at the cabin.

We had a beautiful sunrise, the new rack accommodated the shotguns, and the happy campers were ready to go (with barrels covered for the rain).
 

Attachments

  • IMG_20220506_052645026.jpg
    IMG_20220506_052645026.jpg
    3.4 MB
  • IMG_20220506_074855150.jpg
    IMG_20220506_074855150.jpg
    2.5 MB
  • IMG_20220506_095801937_HDR.jpg
    IMG_20220506_095801937_HDR.jpg
    4.3 MB
Unfortunately, an intruder found its way under our new outhouse, it dug past the screening.

Luckily my daughter heard it before using it and alerted me.

The intruder had done some damage, but was dispatched, resulting in a small "puncture" in the side of the outhouse. It ate though the plywood, but luckily only where we had covered it with cement board (to protect it from the outside).

I would consider these far more dangerous than the famed drop bears, often traveling in the opposite direction, and have thousands of very dangerous barbed quills!
 

Attachments

  • IMG_20220506_075305028.jpg
    IMG_20220506_075305028.jpg
    5.3 MB
  • IMG_20220506_075319898.jpg
    IMG_20220506_075319898.jpg
    5.7 MB
  • IMG_20220506_075405279.jpg
    IMG_20220506_075405279.jpg
    2.5 MB
  • IMG_20220506_075447835_HDR.jpg
    IMG_20220506_075447835_HDR.jpg
    5.4 MB
Since there are no leaves up there, I also stopped to take a few pics on the way out. That is the beginning of the Cannonsville Reservoir.

We did not see any Turkey, and the only deer we saw (3) were from the truck as we were leaving (still on the Mtn). We also did not flush any grouse (and we covered a lot of ground), but we did find evidence of one that had met his demise, which is frustrating when the #s are low.

The last pic is the same view as the first with some telephoto.
 

Attachments

  • IMG_20220507_131936148_HDR.jpg
    IMG_20220507_131936148_HDR.jpg
    6.5 MB
  • IMG_20220507_131942613.jpg
    IMG_20220507_131942613.jpg
    6.9 MB
  • IMG_20220507_132005630.jpg
    IMG_20220507_132005630.jpg
    6.4 MB
From a scrounging standpoint I had a very unproductive weekend. Since my wife's birthday and mother's day were on the same day I gave her a nice weekend. I made her dinner on Saturday night with some scrounged ramps.
Resized_Resized_20220507_205640.jpeg
Venison backstrap with a pear and ramp pan sauce, ramp pesto with angel hair pasta and asparagus. Delicious!

I'm finally going to run the MS400 this coming weekend. I'm helping my dad with a large oak that was taken down next to their cottage. I will even be able to break out the MS660 with the 32" bar for a few cuts. I don't think that will even make it the full diameter of the tree. Should be fun!
Have a great week guys!
 
Looks delicious, healthy, and perfectly cooked!

Hope everyone enjoyed!


From a scrounging standpoint I had a very unproductive weekend. Since my wife's birthday and mother's day were on the same day I gave her a nice weekend. I made her dinner on Saturday night with some scrounged ramps.
View attachment 987051
Venison backstrap with a pear and ramp pan sauce, ramp pesto with angel hair pasta and asparagus. Delicious!

I'm finally going to run the MS400 this coming weekend. I'm helping my dad with a large oak that was taken down next to their cottage. I will even be able to break out the MS660 with the 32" bar for a few cuts. I don't think that will even make it the full diameter of the tree. Should be fun!
Have a great week guys!
 
Well some really good times lately, turkey hunting with my sonDCC77925-9800-45C3-A2DC-E66AE8992238.jpeg
And some not good times-father in-law passed away. He accepted Jesus as his savior after watching a Billy Graham sermon a week before he passed and he’s not suffering anymore so that’s good but will be missed greatly. Lots of good times hunting and fishing with him7FF7D151-EF33-4152-A473-CA48360ECF10.jpeg
Was going to try to post some firewood progress pictures but probably won’t happen today……

317117CE-67FD-4457-BB76-3732C5DCF9BF.jpeg


EA50CA80-F16F-4BE6-8077-97A54875025F.jpeg

But here’s a wheelbarrow picture 198ECCF6-5146-4D39-87CB-D159CB7404FF.jpeg
 
And some not good times-father in-law passed away. He accepted Jesus as his savior after watching a Billy Graham sermon a week before he passed and he’s not suffering anymore so that’s good but will be missed greatly. Lots of good times hunting and fishing with himView attachment 987091
Sorry to hear about the not good times. Sounds like you married well. Cherish those memories.
 

Latest posts

Back
Top