Really hard to beat the U.S General boxes. I like the green, but could live with yellow if the price was right.
Scrounging Firewood (and other stuff)
- Thread starter mainewoods
- Start date
Help Support Arborist Forum:
Working on a Detroit?
Not quite on the same level, but I've got a couple of Milwaukee Packout stacks going that are working out well for me. Tupperware tool chest..?
Loaned that to the other fleet so they could get up and running.
Sorry for the bad picture. The scaffold is staying in here till the last wall is finished. Put up the wall scabs for the desk. Just clamped some boards on to get a feel is I like the depth or want to go narrower. Same dimensions as the corner desk in my man cave in the house. Feels huge out here for some reason. I need to store all the same stuff, so I likely won't make it any smaller.
MechanicMatt
Cut Split Stack Burn
I had the tip of my right hand ring finger put back on
Little bit of nerve issues with it. My pal that drove me to the ER, I watched his facial expressions when they were doing their work. I couldn’t watch my hand…
His eyeballs popped out his head, I asked what happened
He said “dude they just rotated and balanced your finger and put it back on”
Then Uncle Mike can tell you guys about the time I was maybe 2 and my sister was holding my dad’s filet knife. I grabbed the blade and she pulled it away. I still (41 years later) have no feeling in that thumb
Mike drove the car to the ER that time…
Fingers are needed!!
MechanicMatt
Cut Split Stack Burn
That is AWESOMEAnd on to something a little less gruesome...
View attachment 1232898View attachment 1232899View attachment 1232900
My daughter made this up with material scrounged from the scrapyard.
Nice rustic vibe you've got going on in there.
Did this ten years ago. Ran it through a dirt bike chain and sprocket. There was a piece left inside the glove, but it was too smushed for them to save it. Hurt pretty good for a while.
What's the story on the upside down cardboard box?
Good evening guys.
Basketball day here. My youngest is in 6th grade so finally this means the last season of all Saturday all winter ball. Love watching my kids but not at all sad about that.
Whipped up some homemade chicken florentine for dinner tonight.
Basketball day here. My youngest is in 6th grade so finally this means the last season of all Saturday all winter ball. Love watching my kids but not at all sad about that.
Whipped up some homemade chicken florentine for dinner tonight.
A couple pics from today's ride.
Ouch! Gloves and machines/tools don't always play well together...
This is true. It was a shame to ruin a nice pair of riding gloves but it did keep everything nicely contained for inspection. Unfortunately it was too mangled to do anything with.
Had about an hour's ride to the nearest clinic. They trimmed it all up with a pair of dykes and sewed it shut. The pain level was pretty high!
I always wear work gloves when running saws or other power equipment. Has saved or reduced damage many times. When you feel that little tug on your glove, you know it is time to remove your hand!
For example, when splitting wood one time with the hydraulic splitter, the splitter closed a split in the wood. When I felt it, I yanked my hand out just in time ... the finger of the glove ripped off and was crushed, but thankfully my hand was fine! If the glove had not given me some warning, I'm pretty sure I would have had some damage and possibly lost a finger.
Also, once with the chainsaws (a clutch spring broke and the chain spun w/o any throttle) and once with the hedge clipper (I extended it out with one hand and caught it with the other, my finger was off the trigger, but the blades had not stopped yet). Both times I had minor damage to a finger (one required stiches), but I believe in both situations the damage would have been much worse if I were not wearing the gloves. That fraction of a second it is going through the glove gives you some reaction time, and w/o a glove the damage to your hand would be that much deeper.
Also, I was glad I was at least wearing double layer work pants when using the chainsaw (just bought some more of them). I was tired, near the end of the day, and I reached out to cut a limb. My finger was off the throttle, but the chain had not yet stopped as I lowered the saw. It touched my thigh, the chain went through both layers of pants, but then "bound up". The pants looked horrible, but my leg only had a 4" scratch ... I lucked out!
Be careful out there, it can always be worse!
For example, when splitting wood one time with the hydraulic splitter, the splitter closed a split in the wood. When I felt it, I yanked my hand out just in time ... the finger of the glove ripped off and was crushed, but thankfully my hand was fine! If the glove had not given me some warning, I'm pretty sure I would have had some damage and possibly lost a finger.
Also, once with the chainsaws (a clutch spring broke and the chain spun w/o any throttle) and once with the hedge clipper (I extended it out with one hand and caught it with the other, my finger was off the trigger, but the blades had not stopped yet). Both times I had minor damage to a finger (one required stiches), but I believe in both situations the damage would have been much worse if I were not wearing the gloves. That fraction of a second it is going through the glove gives you some reaction time, and w/o a glove the damage to your hand would be that much deeper.
Also, I was glad I was at least wearing double layer work pants when using the chainsaw (just bought some more of them). I was tired, near the end of the day, and I reached out to cut a limb. My finger was off the throttle, but the chain had not yet stopped as I lowered the saw. It touched my thigh, the chain went through both layers of pants, but then "bound up". The pants looked horrible, but my leg only had a 4" scratch ... I lucked out!
Be careful out there, it can always be worse!
I wear leather gloves when I run outdoor power equipment. This to protect my hands and also to offer additional vibration dampening. I won’t wear them if I’m sticking my hands someplace where the running machine can grab the glove and pull my hand in. With rare exception I don’t wear gloves when running electron powered woodworking and metal working tools (handheld or stationary) for the same reason…. My hands are often close to spinning blades and spindles and getting snagged is a real possibility. A notable exception is angle grinders. This machine/glove stuff was drilled into my head when I was a kid…. Treat them like loose fitting clothing.
RE chainsaws… I tore my pants with a saw that wasn’t running. Sharp Stihl Rapid Super chains can tear you up whether the saw is running or not! Enough chewed up “pros” have come through the saw shop where my son works that I’m loathe to use a saw without chainsaw pants.
I did buy a set of chainsaw paints, but generally only wear them if I'm planning on some "extended" cutting. I don't like chaps as they seem to snag on everything, and I can't work effectively with them on.
Always, the most important thing is being alert and careful. Not much will stop a chain under full power.
I started with chaps but found that constantly getting snagged was dangerous. I can also use suspenders on pants which helps keep my pants and tool belt in place. The wedges and beating tool weight is not insignificant!
Similar threads
Want to Sell
4 free saws
