Secondary screening for stump grinding

[gr8scott72]

G'day GR8 SCOTT,

I have a Carlton SP 4012 in Aus, I see the cover over top of wheel is back in the pic. where you are on the root mass.

Mine was a pain in the A... and I started tying it up, then took it off.

How are you finding that feature of the machine.

I leave it up on big stumps for 2 reasons if I'm not pointing at anything valuable.

1. It gets in the way when I'm burried deep in the root ball.

2. It helps spray some of the chips over the top of the stump and out of the way. (If I have to have it down, all the chips stay under the machine and it takes longer if it's a large stump as I'm regrinding the chips each pass.)

 

[Creeker]

They need a factory lock up fixture, understand what you're saying re getting in the way, mine was constantly when getting down near full depth in the stump.

regards.

 

[gr8scott72]

They need a factory lock up fixture, understand what you're saying re getting in the way, mine was constantly when getting down near full depth in the stump.

regards.

Mine doesn't ever fall down. The gaurd on my old Rayco 1625 did. Probably because it was a smaller machine.