Stihl 038 AV Super Pro choke/ kill switch

[dmezzomo]

Can anyone supply me with a photo or 2 of the choke/kill switch configuration for this saw?
A couple of people have worked on this saw before I got to it and the contact spring and the switch shaft were either broken or bent out of shape (spring). I have replaced these parts and it appears to be working but to kill the engine, you have to hold the throttle wide open to put the choke shaft down. It doesn’t seem right that you have to rev the engine to kill it!
Thanks,……Don

 

[Mad Professor]

Check with an ohm meter, throttle off position, if the spring makes ground to cylinder/coil mounts. If not trace the ground wire back.

Also check the shaft and where it mounts into the handle casing.