I am putting back together an old stihl 075av electronic and can’t quite figure out the kill switch. Saw starts right up but
Something is not wired correctly
Three wires on coil one on ignition module
One coil wire is spark plug ( I know where that one goes
) the way i have it wired is like this
Small wire on engine side of coil goes to ground. Small wire on coil ( outside away from engine goes to electronic ignition module and kill switch. Tied together
The switch itself does work only not in this configuration. What is wrong ?
Thanks
Something is not wired correctly
Three wires on coil one on ignition module
One coil wire is spark plug ( I know where that one goes
![Face with tears of joy :joy: 😂](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f602.png)
Small wire on engine side of coil goes to ground. Small wire on coil ( outside away from engine goes to electronic ignition module and kill switch. Tied together
The switch itself does work only not in this configuration. What is wrong ?
Thanks