Summer Time NY GTG

[buckyoak]

Hey guys . The house right before the entrance is #135 if you are coming from county route 12

 

[mikey517]

...and as for the food stuff?? Will there be a grill or anyway to heat up say chili or BBQ pork,or sum such... I'd be willing to make some food once we have a head count.

 

[MustangMike]

Hey guys . The house right before the entrance is #135 if you are coming from county route 12

You should give full directions from Rte 84 (I believe you take exit 3?)

 

[CTYank]

You should give full directions from Rte 84 (I believe you take exit 3?)

For those who don't want to use Google Maps, from what Bucky has said, mileage from DeLorme (Corrections welcome):

From I-84 interchange 3, S of Middletown:
1 mile E on US 6 to jct. with CR 12 (S) and CR 50 (N), go S as below to *junction*

From I-87 interchange 16, Harriman:
12.16 miles W on US6 & NY 17 to the split of US 6 from NY 17 in Goshen
3.19 miles W on US 6 from the split from NY 17 to the *junction*

From the *junction* of CR 12 and CR 50 off US 6
3.88 miles S on CR 12, Lower Rd along the Black Dirt, past Guinea Hill Rd on R to Stoney Bar Rd on R.

.71 miles W on Stoney Bar Rd. to drive on L (S) about 100 yd past Delmar Hill Rd
That point is at lat/long N 41.370145, W 74.459902

On Google Maps, search [New Hampton, NY], find CR 12 off US 6, then look S for Stoney Bar Rd. Look just past Delmar Hill Rd.
HTH and CYA there.

Bucky, need a portable gas grill?

 

[MechanicMatt]

I'm still down in Tennesse, when I get home I'll get bucky to answer the food questions. And thank CTYank your post prety much sums up directions

 

[166]

I believe this is the location?

 

[166]

Should be able to use this link for directions.

https://www.google.com/maps/dir//41...yJzEyLjUiTiA3NMKwMjcnMzUuNiJX!3b1!4m2!1m0!1m0

 

[J.Walker]

Sounds like there are a few mechanics coming to the GTG. Are any of you inspectors? I need to buy a inspection sticker.

http://rochester.craigslist.org/rnr/4547566825.html


.

 

[spencerpaving]

Any wood set up yet?

 

[buckyoak]

Thanks ct for the detailed set of directions !!! They are pretty much on point . 166 has the exact locations pinpointed . Good stuff . I will have a grill setup and I'm going to have a pizza place bring a bunch of food over . That's the plan at least . I have quite a few logs . Most in the 10" to 14 " range . Still working on getting more . Going to have the tractor with the forks on to lift the logs to cut .

 

[buckyoak]

Sounds like there are a few mechanics coming to the GTG. Are any of you inspectors? I need to buy a inspection sticker.

http://rochester.craigslist.org/rnr/4547566825.html


.

Not to sure of the validity of that ? I'm a ny state inspector and I have heard nothing on this subject , does this mean you can get pulled over as your cutting your grass !?!?! Hope this is not true .

 

[MustangMike]

Some hardwoods in the 20-30" range set up on logs like at the spring GTG would be nice if you can find them. Too bad I'm not closer, I've cut some decent ones this year including Chestnut Oak and White Oak.

 

[MasterMech]

I like big wood....

 

[wcorey]

Not to sure of the validity of that ? I'm a ny state inspector and I have heard nothing on this subject , does this mean you can get pulled over as your cutting your grass !?!?! Hope this is not true .

http://www.snopes.com/politics/traffic/lawnmower.asp

The sad part is that it's believable in states like ny, ca, ma, etc...

 

[mikey517]

Is there an approximate head count yet??

 

[Ironworker]

I'm in.

 

[MustangMike]

Me too!

 

[spencerpaving]

I'm pretty sure I'm coming unless something catastrophic happens

 

[MasterMech]

I'm in!

 

[mikefunaro]

I'm in. Should be a good one!