Sure is quiet in here....do I need to start a fight?

[Stihl 041S]

Hey Dan. I finally got the copy of the plans for a gas forge.
Address still the same?

 

[dancan]

Yes

 

[Jimmy in NC]

Hey Dan. I finally got the copy of the plans for a gas forge.
Address still the same?

Mean Dan
123 Wood Hauling Minivan Lane
Eskimo Village, frozen Canada

that's it Rob!

 

[Cantdog]

Maybe a little snow today....maybe a little rain.....still letting the smoke out my Jonsereds cut firewood....just as soon stop doing that anytime...maybe next month...maybe.....

 

[pioneerguy600]

Was - 10C this morning, all that liquid water was very hard but no new snow so that`s a good thing. Stihl cut wood may be required for the next couple of months, got 28" of ice on the saltwater and more than 36" on the freshwater lakes.

 

[Jimmy in NC]

Whew all the way down page one again...

Most of the way through Monday.

 

[pioneerguy600]

Not much action on here today, page slips downward quickly.

 

[jimdad07]

Can't let her fall

 

[Cantdog]

Ain't Satday fer me...busy guy here......been wicked busy on that 'Nadian/English saw......some things not pretty.....but is what it is.....gonna be awesome...after I spend my way to the end......stihl a decent buy.....gonna be brandy new in the end....last me out fer sher......of course this is all so I can do more work......hmmm...hadn't seen that written down before......LOL!!

 

[jimdad07]

Got the second 084 case cleaned and pretty as she can be without fresh paint. Started breaking down one of the Johnny Red 90e's I have and getting it cleaned. Looks like it was just starting to go up when she quit for whoever owned it. New rings should take care of it. Clutch is a frigger on this to get off this saw, going to have to build a puller for it. I'm trying to get all of these projects cleaned up and the parts sorted, bagged, labeled and hung on the walls before I get too heavy into building them. My shop floor is permanently waterproofed from all the saw mess I've been cleaning. Good work bench cover is frp board turned smooth side up. Also, I won a brand new 575xp piston tonight delivered for under $9.00. Found a Huztl piston auction that started at .99c and nobody had bid on it. I got for .99c plus shipping. I've had pretty good luck with the Huztl stuff so far.

 

[Welder56]

Been a nice few days after the sh!t storms haha. Driveway actually looks decent... first time in months. Can't wait to get back at my ms440.

 

[295 tramp]

sunny and mid 50s today, tomorrow possibly thunder storms.
Welcome to spring time everybody.
Time to let the chips fly and get a head start prepping for next winter.

 

[dancan]

Page 2 ...... Slack

 

[Welder56]

Thank god the sun finally has some strength too it. I noticed the snow is compacting down. The ice is alot easier to chip as well

 

[pioneerguy600]

Melting snow and running water, must be spring, sun is warm when its out.

 

[pioneerguy600]

Got a couple of rebuilt /ported saws to get started and tuned, maybe cut some wood with them.

 

[dancan]

Well, I have a couple of cedar trees to cut. Maybe dig out the tractor and find some road side trees on Sat or Sun .

 

[jimdad07]

Picked up a new chain grinder. Switch is a little goofy, once in awhile it cuts out. Wonder if I'm a little too heavy handed with it, maybe I'm over amping the breaker in the switch. Other than that it works well.

 

[cobey]

Picked up a new chain grinder. Switch is a little goofy, once in awhile it cuts out. Wonder if I'm a little too heavy handed with it, maybe I'm over amping the breaker in the switch. Other than that it works well.

I got one of them, i guess i should put the gaurd on mine

 

[jimdad07]

I got one of them, i guess i should put the gaurd on mine

How do you like it? BTW, I'm not burning the cutters at all with it. Figured that's how it sounded when I mentioned too much pressure.