Sure is quiet in here....do I need to start a fight?

[Cantdog]

It is real easy to find and pick up a cable skidder up here right now, lots of Timber jacks selling for cheap these days. I know of one with low use hours on it, knew the machine since new and could pick it up for around 8 t US ready for work, comes with ring chains on all four so taking a tractor in the woods for any serious harvesting isn`t worth the effort. Still ok for us wood scroungers that can work when the weather permits and not need to make money off the work expended.

Same around here...even more so since a lot of the paper mills have closed their doors. $8-10,000 will buy a you a very nice used machine these days. But they don't like real deep snow either.......once they start hopping up and down real easy to take out a transmission or u-joints.!!!

 

[pioneerguy600]

One needs to keep a track broke all winter in and out but the few now running and in use work all winter, the feller bunchers are taking over with porters hauling all the wood now.

 

[Cantdog]

Page TREE ZZZZzzzlackahzzzzzz..........

 

[cheeves]

Page TREE ZZZZzzzlackahzzzzzz..........

Mornin' Rt eautiful mornin out here could pass for Maine or Novi!! Turkeys come and gone! Song birds flyin in....skunks ect gone. Saw a nice buck out here 2 mornin's ago and I'm 400 yrds from center of Plymouth up here atop Watsons Hill lol. Town land out there and town don't even know about it! lol all from the city....Most of my woods on it!
Well no ones around. Just killin' time getting over this flu.....(about whole town down with it....too many people!)
See yah in a bit.....be good!

 

[dancan]

Page 2 bump !!!!



She holds that 660 better than I've seen guys hols a 390 ExPee lol

 

[pioneerguy600]

A 660 doing firewood duty, can`t say much bout that!

 

[Cantdog]

WEll now................if I wasn't already in love...........I might be......influenced.....

 

[pioneerguy600]

WEll now................if I wasn't already in love...........I might be......influenced.....

That`s not a red saw she`s running!!

 

[cheeves]

Page 2 bump !!!!



She holds that 660 better than I've seen guys hols a 390 ExPee lol

Looks like my Sister-in-Law Sandra....AS Member! Serious Gals!

 

[cheeves]

A 660 doing firewood duty, can`t say much bout that!

She's just working out!

 

[cheeves]

She's just working out!

Mornin' Beautiful morning here. 36..
Gonna do some more 03 then hit the wp. Sandra's out there already and Pats comin' over. Anyone else is welcome!
Take care fine featherd friends today!
You're "The Finest Kind"!!!

 

[pioneerguy600]

Turned out to be a nice day, the snow melted and settled a bit more, not much mud yet.

 

[Cantdog]

That`s not a red saw she`s running!!

I know......and that's a distraction.......but just as well......if she was running a 90 Jonsereds.......there might be anothah De-vorse in my future.........not really... but fun to imagine.........oh- oh this on the interwebs forever...right......this might not end well......

 

[pioneerguy600]

I know......and that's a distraction.......but just as well......if she was running a 90 Jonsereds.......there might be anothah De-vorse in my future.........not really... but fun to imagine.........oh- oh this on the interwebs forever...right......this might not end well......

Depends on who reads it.....LOL

 

[pioneerguy600]

Everyone sleeping in?

 

[tbone75]

Slide by bump

 

[dancan]

Buummmmp !

 

[Cantdog]

Pretty bumpy in here at the bottom of page II.......looks like Sunday I'll be able to get back in the woods......the snow has settled a lot and with rain this afternoon and Saturday should firm up good....beat some roads in and let 'em freeze......smooth going....

 

[dancan]

Homemade chicken soup page 2 bump !!!!!
I gave the 241 a tuneup today and ported the muffler , while the muffler was off I had a look at the piston , it looked like new from what I could see
I even took the grinder to the bar and knocked some paint off the edges for a 4% gain .

 

[tbone75]

Homemade chicken soup page 2 bump !!!!!
I gave the 241 a tuneup today and ported the muffler , while the muffler was off I had a look at the piston , it looked like new from what I could see
I even took the grinder to the bar and knocked some paint off the edges for a 4% gain .

Bet ya only got 3% on that little thing ! LOL