Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Wagnerwerks
The underdog..
What size are they?
16in i believe.. unsure of 3/8 or 325... The tsb above is 18in so pretty sure their 16's
Saw Dr.
Junk Collector
anyone need a small mt husky bar or two? bottom 3 up for trade/sale. All NOS bars
Small mount like Husky 51/55 or small like Poulan/Echo?
Via Samsung Galaxy S3
K095 8.2mm slot on the bottom two bars. The white total bar in the middle not so sure about since I'm not seeing the k095 oil hole...
I'm looking for 036/026 parts if anyone has some...
•Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
•Cub Cadet CS5018, CS5220, CS5720
•Efco 147, 152, 156, 165
•Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-6800
•Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES
•Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445, 450, 455 Rancher, 460, 1400, 1600
•John Deere CS46, CS52, CS56, CS62
•Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159
•Makita DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i
•Maruyama POLESAWS: MC-PL11, MC-PS11
•McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20
•Olympyk (Oleo-Mac) 941, 945, 950, 951
•Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000
•Pioneer 1074, P-21, P-26, P-28
•Poulan 325
•Powerhorse 190502, 190503
•Redmax G390, G450AVS, G455AVS, G3800
•Sears 35084, 35201
•Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656
•Stanley CS05, CS06
I'm looking for 036/026 parts if anyone has some...
•Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
•Cub Cadet CS5018, CS5220, CS5720
•Efco 147, 152, 156, 165
•Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-6800
•Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES
•Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445, 450, 455 Rancher, 460, 1400, 1600
•John Deere CS46, CS52, CS56, CS62
•Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159
•Makita DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i
•Maruyama POLESAWS: MC-PL11, MC-PS11
•McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20
•Olympyk (Oleo-Mac) 941, 945, 950, 951
•Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000
•Pioneer 1074, P-21, P-26, P-28
•Poulan 325
•Powerhorse 190502, 190503
•Redmax G390, G450AVS, G455AVS, G3800
•Sears 35084, 35201
•Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656
•Stanley CS05, CS06
Last edited:
Saw Dr.
Junk Collector
Each deal is different. I just don't comprehend who would swap a scored 385 for a scored 036. If a guy had the technology to repair the 036, he could easily repair the 385 and have a saw worth twice the $. Nothing wrong with the 036 as a saw. I have one.
Via Samsung Galaxy S3
I have some 036 and 026 stuff left. PM coming on bars asking for more info.
I know I have a 036 P+C that can be cleaned up thinking de-comp cyl.
026 I know I have a new brake crankcase cover and ?? memory forgets
Are you asking for 2 bar studs like used on a 372? If so and I have some in my bins still ( I'll throw 2 in the box). :msp_wink:
yes on both and it sounds like we have a deal going so we'll figure out the details and we can ship mid-next week...
sefh3
Addicted to ArboristSite
What are you need in 036-026 parts?
024/026
coils, clutch/sprocket cover, top covers
036
tons... LOL
I have the crank case, flywheel, AF cover, 1/2 wrap, muffler and a few other pieces... So anything to fill in the gaps; or if someone needs these pieces I can be talked out of them too!
B Harrison
ArboristSite Guru
I am in need of the oiler hose for a mini mac 25, I assume they are the same on a lot of those saws. I am hoping to get a newer one as the one on my saw is 35+ years old and just doesn't seal off.
I have a Pro Mac 610 that I need wrap handle for as well.
I have a PP 16" bar new, never mounted if anyone needs, it will fit small echoes as well, pm me for details.
I have a Pro Mac 610 that I need wrap handle for as well.
I have a PP 16" bar new, never mounted if anyone needs, it will fit small echoes as well, pm me for details.
I might have an extra 026 coil and top cover. I'll check and see if I have the .063" gauge 16" Stihl mount bar you asked about.
ChainsawmanXX
Addicted to ArboristSite
Needing oiler gear for husky 350
Also will take any 6 cube homie stuff!!
Sent from my LS670 using Tapatalk 2
Also will take any 6 cube homie stuff!!
Sent from my LS670 using Tapatalk 2
anyone need a small mt husky bar or two? bottom 3 up for trade/sale. All NOS bars
Pm'd on the Jred bar.
MEATSAW
ArboristSite Guru
I have a good condition tillotson HS-165A carb that I don't need so...
Always looking for chains and bars. PM me.
Always looking for chains and bars. PM me.
Gonna Need a Stihl Concrete Saw....
You out there JIM? Bought a beachside house that needs gutted to four concrete block walls. Build new trusses, electrical and plumbing, drywall and fixtures, cabinets, appliances, tile and floor coverings....
But I'm getting it for less than the cost of the land alone, so four months work will be worth it.
You out there JIM? Bought a beachside house that needs gutted to four concrete block walls. Build new trusses, electrical and plumbing, drywall and fixtures, cabinets, appliances, tile and floor coverings....
But I'm getting it for less than the cost of the land alone, so four months work will be worth it.
Wagnerwerks
The underdog..
Saw to trade
I have a lot of saws / parts I need to part with. It's getting too cluttered around here and the ones I don't want need new homes. Make me some offers. I know most of it isn't worth a lot, but I need lots of stuff and have lots to trade/add to offers.
*Partner-Pioneer 450 has decent comp. and runs, but does have a nick in the ring on the exhaust side. Still pulls 150# if I remember correctly. Missing an air filter, otherwise used little from visible wear. Pretty sure this is the same as the husky 45.
http://db.tt/HFjrHYRZ
*Poulan 2300cvas. The green 2300 has some marks on piston, but still will run. The craftsman parts are just what you see. There a good p/c from a 2000 there also. The pp180 runs great but lost a tiny piece that holds in the bar adjuster. I rigged it and it works fine. I actually used it yesterday. I may keep that one, but if someone makes me a decent offer, maybe it goes too.
http://db.tt/foyW80w5
*Piles of poulan parts from all clamshell eras.
*I also have couple 33cc homies. One complete that runs and one missing pieces.
*There's a box of Stihl 09-011 parts here too. I think there are 3 saws worth of parts in the box.
If you need something, pm me and I'll let you know if I have it.
More to come.
Edit. I thought of more.
*I have a Mac timberbear that runs perfectly. I just went through it with new fuel lines and such and it even looks nice now.
http://db.tt/TBzvDQwl
http://db.tt/34KPz75d
http://db.tt/9zjVqt5G
*Maybe more for the old mag thread, but I also have a nice running p40 and a super 754 I wouldn't mind parting with.
I have a lot of saws / parts I need to part with. It's getting too cluttered around here and the ones I don't want need new homes. Make me some offers. I know most of it isn't worth a lot, but I need lots of stuff and have lots to trade/add to offers.
*Partner-Pioneer 450 has decent comp. and runs, but does have a nick in the ring on the exhaust side. Still pulls 150# if I remember correctly. Missing an air filter, otherwise used little from visible wear. Pretty sure this is the same as the husky 45.
http://db.tt/HFjrHYRZ
*Poulan 2300cvas. The green 2300 has some marks on piston, but still will run. The craftsman parts are just what you see. There a good p/c from a 2000 there also. The pp180 runs great but lost a tiny piece that holds in the bar adjuster. I rigged it and it works fine. I actually used it yesterday. I may keep that one, but if someone makes me a decent offer, maybe it goes too.
http://db.tt/foyW80w5
*Piles of poulan parts from all clamshell eras.
*I also have couple 33cc homies. One complete that runs and one missing pieces.
*There's a box of Stihl 09-011 parts here too. I think there are 3 saws worth of parts in the box.
If you need something, pm me and I'll let you know if I have it.
More to come.
Edit. I thought of more.
*I have a Mac timberbear that runs perfectly. I just went through it with new fuel lines and such and it even looks nice now.
http://db.tt/TBzvDQwl
http://db.tt/34KPz75d
http://db.tt/9zjVqt5G
*Maybe more for the old mag thread, but I also have a nice running p40 and a super 754 I wouldn't mind parting with.
Last edited:
SawGarage
Addicted to ArboristSite
I can help ya...Similar threads
Latest posts
-
-
For anyone looking for Stihl 63PMX lo pro ripping chain in the US- Latest: Mad Professor
-
-
