Swap meet...

[psuiewalsh]

TRADE PENDING 11/1/12

Looking to trade a Mcculloch 7-10 20" for a Stihl 025 or similar saw that uses the stihl small bar mount. I have a bunch of small chains I would like to use.

 

[ELECT6845]

Stihl 036 pro

Its in great shape but the cylinder and piston are junk, straight gas. What you have to trade? Im interested in 372, 385, 394 that needs top end.

 

[zogger]

k095

rats, ain't got it. I have a k041 I just got. (I think it is a k) So I think the onliest small mount one I have is a 16 on my little husky.

 

[axlr8]

Anyone have a dead 056 bosch stator plate? I need the whole shebang minus the FW...Looking to do some messing round! If you got one laying around..Ill take it!

 

[tmessenger]

Its in great shape but the cylinder and piston are junk, straight gas. What you have to trade? Im interested in 372, 385, 394 that needs top end.

I have a 372 project that needs bottom end work.

Tim

 

[Mastermind]

I have a 372 project that needs bottom end work.

Tim

If he don't want it I might be interested.....

 

[cowroy]

If he don't want it I might be interested.....

Got a little practice at 372 bottom ends ehh? oke::monkey:

 

[jockeydeuce]

Anyone have a dead 056 bosch stator plate? I need the whole shebang minus the FW...Looking to do some messing round! If you got one laying around..Ill take it!

If you don't find one closer, I've got a dead one I just took out of an 056 super you can have.

 

[Mastermind]

Got a little practice at 372 bottom ends ehh? oke::monkey:

Oh yeah......we blow em up sometimes. :hmm3grin2orange:

 

[axlr8]

If you don't find one closer, I've got a dead one I just took out of an 056 super you can have.

PM outgoing! :msp_sneaky:

 

[sefh3]

If you don't find one closer, I've got a dead one I just took out of an 056 super you can have.

When you send him the ingition, send me the rest of the 056S:msp_razz:

 

[sefh3]

i believe this to be a 3700 starts and runs piston looks good thru the muffler but it needs a new oil hose (from the tank)View attachment 260141View attachment 260142View attachment 260143

Here you go.

 

[tmessenger]

Edit: Looks like this is going out to the northwest, thanks to the others that express interest.

Tim

So here's the poop on this 372:

Drive side bearing cage broke up and go sucked in, piston has a few marks but looks usable to me (see photo) , cylinder is good. Crank turns no evidence a bearing spun, missing the brake flag but brake is good, clutch hub bearing is junk, clutch and hub look ok, no carb cover ........ be.. be. be that's all folks.

 

[ChainsawmanXX]

I could use a 372 cylinder, and clutch cover!

Sent from my LS670 using Tapatalk 2

 

[Jacob J.]

I could use a 372 cylinder, and clutch cover!

Sent from my LS670 using Tapatalk 2

I have a 372 jug (I think) somewhere that's missing some of the cooling fins if that would work.
I don't think I have any clutch covers though.

 

[Warped5]

I could use a 372 cylinder, and clutch cover!

Sent from my LS670 using Tapatalk 2

If you don't get a cover here ... You can get a very good AM cover from eBay seller huztl ... I did and was impressed.

 

[nstueve]

Does anyone know if the threads on the crank case side are the same between k095 and d009?

if so or if unknown...
I need a set of D009 (9mm) bar studs of a husky, makita, dolmar... etc (should be any large husky mount). I'm playing with some options and have a fun project that I need them for. I know someone has a parts crank case out there that has a set of these!!!!

PLEASE!!!! :msp_rolleyes:

 

[huskydude]

I have a 372 project that needs bottom end work.

Tim

You never told me you had a 372!:msp_sneaky:

 

[tmessenger]

You never told me you had a 372!:msp_sneaky:

Well with a name like huskydude I didn't think you'd be interested.

 

[o8f150]

going to throw this out to everyone,,, i am putting together an 041av fb for an old guy,, he blew the plug out when running it the other day,, i just got the cylinder back having a helicoil put in,, yes thats what he wanted done,,, i need a base gasket for it to get it back together for him,, northwood saws web sight is messed up and i don't trust fleabay,, he is not rich so i am donating my time to get it going for him,,, i know,, this idiot 08fer does a lot of work for free,, yes i do and i love it,, anyway i have some green paper with some brown stains on it and have a few things for trade,,