Nate, here's the rest of the stuff you need. The clamp goes over the rubber air box to clamp it tight to the intake neck. The rubber grommet is for the choke lever. The carb gasket and brake flag are nos. I'll pop everything in the mail in a bit.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Nate, here's the rest of the stuff you need. The clamp goes over the rubber air box to clamp it tight to the intake neck. The rubber grommet is for the choke lever. The carb gasket and brake flag are nos. I'll pop everything in the mail in a bit.
Duke Thieroff
Fill your hands, you SOB!
Nate, here's the rest of the stuff you need. The clamp goes over the rubber air box to clamp it tight to the intake neck. The rubber grommet is for the choke lever. The carb gasket and brake flag are nos. I'll pop everything in the mail in a bit.
Someone find this guy a WT-194
I sent one to Roncoinc a couple of years ago and it didn't fit his saw. He might still have it.:confused2:
MechanicMatt
Cut Split Stack Burn
Does anybody know if a 031 has the same fuel tank? And ehhh what 026 tid bits you got??
russhd1997
Innocent By Stander
031 gas tank is different.
Warped5
WingNut
Need to know if eggrolls are electronic or require points. :jester:
P.S. Please check your email.
MechanicMatt
Cut Split Stack Burn
Sorry, I tried.
Does anybody have a poulan non strato wildthing engine in the 42cc? Trying to build a cheap play toy.
Wagnerwerks
The underdog..
Bump. Stihl part are spoken for, newer poulans are mostly eaten up but still a pile of coils and such.
I could use:
-24" bar/chain for poulan 3400-4000, a 24" bar/chain for a dolmar 143, and 16-18" Poulan 335 bars/chains.
-3700 piston and cylinder. Thought I had one, but got hosed.
-365 or 380 poulan.
-make me offers... Looking for straight up trades, or I'll add in where I need to, or dead presidents...we can hagle over which president...
Also need Stihl 441 recoil/starter cover and a clutch cover.... 361 & 362 will fit. Also need the AV spring that mounts to the 1/2 wrap.
Need a recoil/starter for a 200T, handle, clutch cover.
Does anyone know if there are NON-flippy caps that would fit an ms310 and what saws they would come off of? Got a buddy here who broke both of his caps in one day. I think a non-flippy alternative would be better for him!
sefh3
Addicted to ArboristSite
Look for an older 029 or 029Super.
Needed for a Homelite 2000:
Fan Housing
Recoil Cover
Cylinder Shield
Wrap Handle.
I need a fan housing just so I can cobble him together enuff to pull him over.:help: Have no idea as to compression and spark at present.
Lots of old mag. stuff to trade or CIF (cash-in-fist).
Carl
Fan Housing
Recoil Cover
Cylinder Shield
Wrap Handle.
I need a fan housing just so I can cobble him together enuff to pull him over.:help: Have no idea as to compression and spark at present.
Lots of old mag. stuff to trade or CIF (cash-in-fist).
Carl
rms61moparman
Addicted to ArboristSite
Do any of you guys need any 1127 Stihl (029-MS390) plastic?
I've got a bunch of that crap laying around in my way.
Most isn't pretty but still functional.
Open to about anything.
Mike
I've got a bunch of that crap laying around in my way.
Most isn't pretty but still functional.
Open to about anything.
Mike
sefh3
Addicted to ArboristSite
I sent you a PM on this.
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,168
There isn't a non-flippy that will fit. Finding him a tank from a 029/039 is the alternative, or take the saw away.
Thanks for the info. I like both suggestions, particularly the latter. Good guy, very skilled with a saw, but watch out when he gets tools in his hands. Sometimes it surprises me that he hasn't ripped the steering wheel out of his truck when making a quick turn.
