Swap meet...

[tbone75]

I'm looking for a good clutch drum with bearing for a poulan 1800/2000. The one on my saw is really chewed up on the gears that turn the chain. I am also looking for a front handle to a Poulan 3000. I just picked up a nice little 3000 and the dang front handle is actually broke in half where it bolts to the side of the tank...:bang: I'm also looking for a good 16-18'' .325 .050 bar for the 3000 also. All I have for trade is some green paper. PM me if ya can help me out.

I think I can help with the wrap handle. Let me look tomorrow.

 

[MS460WOODCHUCK]

I think I can help with the wrap handle. Let me look tomorrow.

Thanks!!!

 

[mp5n]

Looking for Husqvarna 576XP piston

If anyone can help out with a good used Husqvarna 576XP piston please let me know.

Thanks,
MP5N

 

[mitch95100]

.050 3/8 28" bar for my 044 cheap?

Sent from my USCCADR3305 using Tapatalk 2

 

[kopeck]

Remington SL-9 (Parts or Fix up)

I have this nice looking SL-9 that needs to find a good home.

It has recoil problems. The spring is broke and the fool who took it apart to see what was wrong didn't put the dogs back in when he put it back together. I, err, I mean the fool can't member what he did with them so you will have to source them.

It did run before the recoil broke but it has sat so take that for what it's worth. It's in nice shape other wise, all I did was wipe it off. It has a 14" bar and a chain that looks pretty close to new. I did pull the filter off and everything in the air box is nice and clean.

How about $35 bucks + shipping? I can do USPS or UPS. UPS will probably be easier & more reasonable.

View attachment 273499

View attachment 273500

View attachment 273501

 

[bucknfeller]

To Trade:

019T Complete saw, compression feels good, no spark. Not sure about anything else. Partially disassembled.

031AV Complete saw, compression feels good, piston looks good through ex. port. muffler has been boogered/welded, makes spark, but needs plug wire. That's all I know about it. Partially disassembled.

Parts Needed:
Husky 445/450 wrap
026 coil
18" or 20" Husky small mount 3/8" .050 bars
Always looking for husky parts/project saws.

Thanks in advance,
Josh

 

[bplust]

If you want to get back at me send me a MAC SP125, ill be mad for weeks

Don't get frustrated, just cut it in 5 pieces and you'll have a small fleet of minis!

 

[psuiewalsh]

Don't get frustrated, just cut it in 5 pieces and you'll have a small fleet of minis!

Just need to go the other route and set them up like a pulling tractor. 5 minis to one chain. Use the first mini to get the rest cranking over

 

[Arrowhead]

You'll forget, and so will I. Then weeks later, while I'm browsing old Chainsaw Age back issues, I'll see an old Dolmar ad and I'll think "man, I wonder if Ed still has those bars..."

Hey... I remembered.
The Oregon might be spoken for.

 

[Jacob J.]

Hey... I remembered.
The Oregon might be spoken for.

No worries...that Tsumara looks interesting. I could cut that and put a roller nose on it...

 

[logging22]

Looking for a 3/4 wrap for a Stihl 440. Got a nearly new half wrap to trade and other junk.

 

[tomdcoker]

Poulan S25DA

I am repairing the above saw and removed the rings to clean the carbon from the ring grove and guess what happened. Yes I broke a ring. Does anyone have a set they would sell or trade? If not does anyone know of a source. I tried partstree and gor NLA. Thanks for any help. Tom

 

[Scooterbum]

I am repairing the above saw and removed the rings to clean the carbon from the ring grove and guess what happened. Yes I broke a ring. Does anyone have a set they would sell or trade? If not does anyone know of a source. I tried partstree and gor NLA. Thanks for any help. Tom

It's got a saw wrapped around it though.Pm address.

 

[barneyrb]

I am looking for a junk carb off a Stihl HS 45 hedge clipper. The one on it is a Zama and missing part so it need not be a working unit.

TIA............

 

[Scooterbum]

I am looking for a junk carb off a Stihl HS 45 hedge clipper. The one on it is a Zama and missing part so it need not be a working unit.

TIA............

Your way ahead to just pick up a new carb off the bay. Been down that road

 

[barneyrb]

Your way ahead to just pick up a new carb off the bay. Been down that road

Well, it's missing the plate, screws, and primer bulb so I was hoping to get the parts, kit the carb, and send 'er down the road.

 

[Scooterbum]

Well, it's missing the plate, screws, and primer bulb so I was hoping to get the parts, kit the carb, and send 'er down the road.

Is that the one that has the 1/4" thick plastic base beneath the bulb? I may have one.

 

[Wagnerwerks]

While we're on Dolmar bars to trade, here's one I don't think I'll ever use. If I find a 6000, I'll be amazed....lol

 

[struggle]

I need of the chain adjuster parts for this cover. Craftsman 2.2 cid saw.
Since everyone here hates these saws that should mean you have lots o parts in a box some where for it:msp_biggrin:

Sent from my C771 using Tapatalk 2

 

[barneyrb]

Is that the one that has the 1/4" thick plastic base beneath the bulb? I may have one.

yep, carb body, plastic plate, and then metal plate with primer bulb.