Swap meet...

[dr hook]

I need a rear handle (throttle handle) for my Stihl 041. The handle is part of the rear case. I dont really have any trade stuff, but I'm willing to pay for one!

 

[Eccentric]

Looking for a Poulan S25CVA coil. I have very few parts but do have $.

to trade?
husky 266 top cover, Maybe a carb from a 272? I can dig for anything of interest but I tend to not keep big parts laying around.

Electronic or points igniton on that S25-CVA? I am in need of 272XP chainbrake parts.

 

[half_full]

Electronic or points igniton on that S25-CVA? I am in need of 272XP chainbrake parts.

the high tech "solid state" ignition. Poulan part # 39088 or 53009088 or 5309088 or Phelon # 13600-01BS depending on how one searches for it.

I don't have anything else for a 272 (other than a whole saw). I got the one I have as a "in a box". Came with the 266 top cover and a few small spare parts. The carb I was thinking was one of those extra parts. Not sure what else. I gave the extra cases away when the project was complete. Saw is for sale though :msp_biggrin:

 

[barneyrb]

I am in need of an earth auger or post hole digger. Not the old fashioned manual kind but a gas powered one. I would prefer one of the small 2 smoke kind with a 6" auger on it. I have all kinds of saw parts and even trade good saw for the right one. I do want one that runs decent, let me know......Got a bunch of post to put down and can't get the tractor in there so something to beat the manual digger style.

 

[Eccentric]

the high tech "solid state" ignition. Poulan part # 39088 or 53009088 or 5309088 or Phelon # 13600-01BS depending on how one searches for it.

I don't have anything else for a 272 (other than a whole saw). I got the one I have as a "in a box". Came with the 266 top cover and a few small spare parts. The carb I was thinking was one of those extra parts. Not sure what else. I gave the extra cases away when the project was complete. Saw is for sale though :msp_biggrin:

Rats. I could have used the 'extra' cases as my PTO side case has some damaged (and poorly repaired) areas.

I may have an electronic coil I can spare. I'll check in my 'stash' this weekend. PM me if I don't get back to you by Monday. My memory isn't the best. If I have a spare I'm sure we can work something out.

 

[husqvarnaguy]

Looking for an 044 worm gear and some flippy caps. PM me if you have something

 

[barneyrb]

Rats. I could have used the 'extra' cases as my PTO side case has some damaged (and poorly repaired) areas.

I may know a guy with good 272 cases that could be traded for Poulan stuff.........jus sayin.....

 

[epicklein22]

Now a sponsor! Lots of parts to sell or trade. Mostly Husky and Stihl, with a focus on professional models. Expect prices to be a tad below ebay. Ready to help some guys get some saws back up and running. I also buy/fix/sell a lot of saws, so I'm always up for some bartering.

 

[Jacob J.]

Now a sponsor! Lots of parts to sell or trade. Mostly Husky and Stihl, with a focus on professional models. Expect prices to be a tad below ebay. Ready to help some guys get some saws back up and running. I also buy/fix/sell a lot of saws, so I'm always up for some bartering.

Now we can legally make you offers eh? Let me know when you're ready for some 395 parts...

 

[epicklein22]

Now we can legally make you offers eh? Let me know when you're ready for some 395 parts...

It's gotten to the point where the supply is too large. I'm sure I will sell some items I'll need down the road, but I don't wanna be a hoarder with a building full of stuff that I plan on fixing some day. Already have stuff that's sat for over 2 years.:msp_scared:

Good on 395 parts at the moment, got a good stash with my last purchase. Should have enough for a few runners. Need another 076 muffler though. $94 at the dealer.

Shoot me a PM with what you need, lots of goodies I'm sure you could use.

 

[Toad22t]

Now a sponsor! Lots of parts to sell or trade. Mostly Husky and Stihl, with a focus on professional models. Expect prices to be a tad below ebay. Ready to help some guys get some saws back up and running. I also buy/fix/sell a lot of saws, so I'm always up for some bartering.

So do you have a Web site? Also do you happen to have a 12mm 044 parts saw? Preferably with a good bottom end! I have p/c's already!

 

[Jacob J.]

It's gotten to the point where the supply is too large. I'm sure I will sell some items I'll need down the road, but I don't wanna be a hoarder with a building full of stuff that I plan on fixing some day. Already have stuff that's sat for over 2 years.:msp_scared:

Good on 395 parts at the moment, got a good stash with my last purchase. Should have enough for a few runners. Need another 076 muffler though. $94 at the dealer.

Shoot me a PM with what you need, lots of goodies I'm sure you could use.

I got your muffler...no needs at the moment, unless you know where there's an IEL model L or M with a 72" bar and stinger.

I'll send you an 076 muffler though, just because I don't have anything better to do. Oh, and wait until you've had a saw sit for 20 years. You stop feeling bad eventually.

 

[epicklein22]

So do you have a Web site? Also do you happen to have a 12mm 044 parts saw? Preferably with a good bottom end! I have p/c's already!

No website, just a garage with a lot of parts. No parts saws in Husky or Stihl. I build saws as well, so anything that isn't cost prohibitive, I build up.

I know I have 044 crankcases, but they're all disassembled. I'll double check though.

 

[Toad22t]

Ok ty!

 

[tallfarmboy]

I am looking for a 272 or 266 cylinder and possibly intake parts to upgrade my open transfer 61 Husqvarna... I have an 064 cylinder to trade, a Super 2 Homelite to trade, or just a few green pieces of paper.

 

[Herd8497]

Need an 051 air dilter

 

[Arrowhead]

Hey... I remembered.
The Oregon might be spoken for.

JJ, did you want the Tsumura bar?

 

[Jacob J.]

JJ, did you want the Tsumura bar?

Yep- let me know what you need for it...

 

[Eccentric]

I may know a guy with good 272 cases that could be traded for Poulan stuff.........jus sayin.....

Hiya my friend! PM me with a list of Poulan (or Homelite) stuff that you're looking for. Also, do you have the Husky parts mentioned below?

No website, just a garage with a lot of parts. No parts saws in Husky or Stihl. I build saws as well, so anything that isn't cost prohibitive, I build up.

I know I have 044 crankcases, but they're all disassembled. I'll double check though.

Do you have a 268/272XP clutch cover and/or chainbrake parts? How about an HD AF elbow for a 272XP?

 

[Arrowhead]

Yep- let me know what you need for it...

I'll get it in the mail tomorrow. Just put a little extra something in the box your sending me already.
Did ya get the stuff I sent ya yet?