Swap meet...

[Duke Thieroff]

Naw.......sounds rigged. :msp_smile:

BTW your saw is done....just waiting on the oil pump to get here.

Oh baby....

How'd it turn out?

 

[michale34]

Im looking for a carberator and filter housing and throttle rod and chokerod for a husky 51,55 and maby a good recoil assemble and air duct for a 55 i have a 038 recoil assembly a 046 recoil and 046 carberator for trade and if nothing else greenbacks also need a carberator and air filter for a 028 stihl

 

[Brushwacker]

I'm interested in the manual. PM what you want or are looking for.
Have a bit of NOS McCulloch parts but no screen, Husky parts NOS mostly small saws small parts (sprockets this and that) this and that for Stihl, and 3+ Echo-JD 602-60v-'s mostly or complete for repair or parts,702 engine W/ compression and spark. I have too many projects so I'd like to trade the Echo-JD for things that don't need any or much attention. Also have an early blue xl 12 Homelite powerhead w/ spark and compression needs a couple or more parts and whatever.

More info on the xl 12 : There is a piece broke about 4" long with a curve, the handle bar attaches to above the front of the clutch cover, that attaches it to the saw. Other then that I would speculate it needs a carb kit and fuel line, not sure what or anything else. Saw will drop very slow to slow when holding the rope handle for compression. Good spur sprocket, no b&c. Don't know if or what later sxl parts interchange or not.

 

[Jacob J.]

Hey guys- I'm looking for a full-wrap for 371/372. Lots to trade or cash...

 

[nmurph]

Im looking for a carberator and filter housing and throttle rod and chokerod for a husky 51,55 and maby a good recoil assemble and air duct for a 55 i have a 038 recoil assembly a 046 recoil and 046 carberator for trade and if nothing else greenbacks also need a carberator and air filter for a 028 stihl

Which 046 carb do you have? Zama or Walbro?

 

[michale34]

Which 046 carb do you have? Zama or Walbro?

walbro

 

[michale34]

Im looking for a carberator and filter housing and throttle rod and chokerod for a husky 51,55 and maby a good recoil assemble and air duct for a 55 i have a 038 recoil assembly a 046 recoil and 046 carberator for trade and if nothing else greenbacks also need a carberator and air filter for a 028 stihl

found a 028 carberator need the throttle rod and control switch

 

[Wagnerwerks]

I'm looking for a good p/c set for a 262 husky.

Bump

 

[bplust]

View attachment 285628View attachment 285629View attachment 285630

I have this new 20" .050 Stihl (12mm) mount bar.

One of the pictures shows the serial. I have no idea of the brand.

I'd trade it for 10-series Mac parts or really anything.

PM if you're interested, I have no use for it.

Bryan

 

[MechanicMatt]

Guys, buddy at work needs for a 045 av super......... Air fitler, Lid for the air filter, and what size is the piston......compression is 70psi wet, cylinder looks clean????? Maybe just tired, new ring???

 

[Jacob J.]

Guys, buddy at work needs for a 045 av super......... Air fitler, Lid for the air filter, and what size is the piston......compression is 70psi wet, cylinder looks clean????? Maybe just tired, new ring???

If it's really a Super, then the piston is 54mm.

 

[cat-face timber]

Shop cleaning time

I have a Husky 340 PHO, with no spark. I bought a extra coil from a member here and never got around to putting it in and trying it out.
I can take pictures.
I would call this a project saw, complete, but still a project saw.

I am looking for either a Husky 235 or a Husky 240, I do not care if it is "e" version or not.
The saw does not have to run, but does need to be complete.

 

[tlandrum]

im in need of a couple of things
046/ms460 crank it can have bad threads it just needs to be useable for mocking up cylinders
044 crankcase complete with rod. can be cracked brok or whatever as long as it can be used for mock up
361 crankcase complete can be cracked as long as it can be used for mock up
066 complete can be cracked as long as it can be used for mock up
got parts or cash

 

[MechanicMatt]

If it's really a Super, then the piston is 54mm.

Thanks Jacob, it says super on the tag, so Id suppose it is a super. Any Idea on the width of the ring? I guess I can break it down and check, but I was gonna give him an idea of the price of all the parts first. I don't ever charge him labor when working on his saws because he is one of the older fellas there who is full of knowledge that I like to call on for help when I need it. Any help fellas on the air filter, and lid would be great. Thanks.

 

[cnice_37]

Anyone have a decent sprocket that will fit a Husqvarna 351? I believe either style will work, .325

Not much to trade, homelite xl and 240 parts, clinton d50, and greenbacks

Thanks

 

[Jacob J.]

Thanks Jacob, it says super on the tag, so Id suppose it is a super. Any Idea on the width of the ring? I guess I can break it down and check, but I was gonna give him an idea of the price of all the parts first. I don't ever charge him labor when working on his saws because he is one of the older fellas there who is full of knowledge that I like to call on for help when I need it. Any help fellas on the air filter, and lid would be great. Thanks.

The rings are 1.5mm thick, on pretty much all of the 045/056 series, except for the early 045 AV which used one ring that was 50mm x .024" and one ring that was 50mm x 1.5mm. Good luck on the air filter and cover, those are getting hard to find like the Husky 2100 filter and cover.

 

[nmurph]

Anyone have a decent sprocket that will fit a Husqvarna 351? I believe either style will work, .325

Not much to trade, homelite xl and 240 parts, clinton d50, and greenbacks

Thanks

What about a drum and you can put a rim on it? Freeb-o for you, just pay postage.

 

[nmurph]

I have a Husky 340 PHO, with no spark. I bought a extra coil from a member here and never got around to putting it in and trying it out.
I can take pictures.
I would call this a project saw, complete, but still a project saw.

I am looking for either a Husky 235 or a Husky 240, I do not care if it is "e" version or not.
The saw does not have to run, but does need to be complete.

What's the cash price on the 340?

 

[bplust]

Is a Husky 240 a Poulan with the exception of the color and casing styling? The starter pulley, clutch, and carburetor are all the same I think.

 

[RedneckChainsawRepair]

I have a some 3120 parts Id like to unload. Mainly a crankcase, gastank, handle, couple of plastic pieces. No carb, jug, piston or muffler..

Thanks for pics. :msp_biggrin::msp_wink:

Snail mail coming your way Monday. :car: