Swap meet...

[Jacob J.]

Looking for some parts for my 372 project.
Wrap handle
Brake handle
oil pump
Brake spring cover
Carb bolts
Elbow the AF goes on for a high top.Can't member what its called ? LOL

I am sure I have something to trade,paper money too !

Thanks for the help !

I got these parts:

oil pump
Brake spring cover
Carb bolts
Elbow the AF goes on for a high top.

 

[tbone75]

I got these parts:

oil pump
Brake spring cover
Carb bolts
Elbow the AF goes on for a high top.

Great ! The wrap handle is covered !

 

[tbone75]

Great ! The wrap handle is covered !

One more thing I forgot , need the sleeve/bushing for the clutch side that goes on the crank.

 

[Arrowhead]

One more thing I forgot , need the sleeve/bushing for the clutch side that goes on the crank.

I have a 371XPG carcass that probably has the stuff you need. I don't know if they will interchange.... I'm still Husky challenged.

 

[jockeydeuce]

I have a 371XPG carcass that probably has the stuff you need. I don't know if they will interchange.... I'm still Husky challenged.

Yes, it's the same, Ed!:msp_thumbup:

 

[Arrowhead]

One more thing I forgot , need the sleeve/bushing for the clutch side that goes on the crank.

John, pm me with whatever you still need. I'll see if it has it. I can send it with the P62 K&N filter.

Yes, it's the same, Ed!:msp_thumbup:

Thanks Rob.

 

[Modifiedmark]

I am looking for a flywheel for a husqvarna 350. The key sheared off of mine.
Have cash.

Seems I had one of these, PM me tonight to remind me to look for it.

 

[roncoinc]

Anybody have a use for this ??

Still looking for a starter screen for a mac 10-10.

 

[PogoInTheWoods]

I have a 371XPG carcass that probably has the stuff you need. I don't know if they will interchange.... I'm still Husky challenged.

I sure could use the trigger/trigger lock assembly for mine if they're available.

TIA.

 

[promac850]

Anyone happen to have an 041 clutch cover without the part that wraps around the muffler? One like this, but hopefully for a little less green paper with dead presidents on them... or a if you happen to want to trade for one original with the muffler wraparound.

http://www.ebay.com/itm/USED-STIHL-...909?pt=LH_DefaultDomain_0&hash=item2c5e0bc9e5

And it is a non AV model, the old Farmboss to be exact. Fixing it up for a friend of mine that wants to spend as little as possible on parts. I do not need the bucking spike or the bar nuts, so if you wish to keep those, you can.

 

[Brushwacker]

Anybody have a use for this ??

Still looking for a starter screen for a mac 10-10.

I'm interested in the manual. PM what you want or are looking for.
Have a bit of NOS McCulloch parts but no screen, Husky parts NOS mostly small saws small parts (sprockets this and that) this and that for Stihl, and 3+ Echo-JD 602-60v-'s mostly or complete for repair or parts,702 engine W/ compression and spark. I have too many projects so I'd like to trade the Echo-JD for things that don't need any or much attention. Also have an early blue xl 12 Homelite powerhead w/ spark and compression needs a couple or more parts and whatever.

 

[cambl]

Pull-ons and a Homie 200

I have these high performance units if anybody wants them whole or needs a part...

Poulan 2150, 1997, needs primer bulb, 150 PSI, good piston, good spark

Wild Thing, 2001, 42cc, no handle, 150 PSI, good piston, good spark

Wild Thing, 2006, 42cc, all there but in pieces

Homelite 200- next move is to the scrrap bin unless someone needs it.

 

[tbone75]

Need a good tank for a Stihl MS200T . Stuff to trade or cash !

Thanks !


Edit : GOT ONE !

 

[blueberrymuzik]

I have these high performance units if anybody wants them whole or needs a part...

Poulan 2150, 1997, needs primer bulb, 150 PSI, good piston, good spark

Wild Thing, 2001, 42cc, no handle, 150 PSI, good piston, good spark

Wild Thing, 2006, 42cc, all there but in pieces

Homelite 200- next move is to the scrrap bin unless someone needs it.

PM Sent

 

[bplust]

I've got two Homelite Zips comlete with bars and chains but don't run

With absolutely no disrespect, you and everyone else that has a broken e-brake cable and a vehicle under 30,000 GVW.

 

[jerrycmorrow]

I have these high performance units if anybody wants them whole or needs a part...

Poulan 2150, 1997, needs primer bulb, 150 PSI, good piston, good spark

Wild Thing, 2001, 42cc, no handle, 150 PSI, good piston, good spark

Wild Thing, 2006, 42cc, all there but in pieces

Homelite 200- next move is to the scrrap bin unless someone needs it.

So what's the story on the 200?

 

[cambl]

Homie 200

So what's the story on the 200?

Looks like it's all there, all pieces in a box (not my doing), and I don't have any idea why it was taken apart. Good parts saw if you need one.

 

[Mastermind]

I need some 50 dollar bills. I have 20s to trade.

 

[Duke Thieroff]

I need some 50 dollar bills. I have 20s to trade.

I'll trade you 2 50s for 6 20s. Plus a years worth of pocket lint and a half eaten bag of brand name honey roasted peanuts.

 

[Mastermind]

I'll trade you 2 50s for 6 20s. Plus a years worth of pocket lint and a half eaten bag of brand name honey roasted peanuts.

Naw.......sounds rigged. :msp_smile:

BTW your saw is done....just waiting on the oil pump to get here.