Swap meet...

[Johnsobri]

Looking for parts for a Solo 639 let me know what you have I may be interested.

Looks like I am also on the hunt for a 026 cylinder and piston
PM please

 

[atpchas]

I need a muffler and the spring assembly that connects the handle to the cylinder, both for an MS361. Have Stihl stuff (026,036,046,ms200,ms361) and green stuff to swap.

 

[Big_Wood]

in need of a few parts. my 346 oiler quit yesterday seems to only oil intermittently even with pickup line and output clear. worm gear is good so i figure it's gotta be the oiler. only used 1/16 of the oil tank to one tank of fuel. another part which wouldn't be the end of the world if i didn't get cause it still works is the clutch for the 346. mine works but rattles like crazy. sounds like it's got a blown rod bearing. i replaced the springs on it which tightened it up but still noisy. seems the carrier and shoe slots are badly worn. i've got some stuff to trade.

 

[nmurph]

in need of a few parts. my 346 oiler quit yesterday seems to only oil intermittently even with pickup line and output clear. worm gear is good so i figure it's gotta be the oiler. only used 1/16 of the oil tank to one tank of fuel. another part which wouldn't be the end of the world if i didn't get cause it still works is the clutch for the 346. mine works but rattles like crazy. sounds like it's got a blown rod bearing. i replaced the springs on it which tightened it up but still noisy. seems the carrier and shoe slots are badly worn. i've got some stuff to trade.

I know a guy...

 

[Big_Wood]

I know a guy...

who is this guy? never heard of him PM sent

 

[Jacob J.]

in need of a few parts. my 346 oiler quit yesterday seems to only oil intermittently even with pickup line and output clear. worm gear is good so i figure it's gotta be the oiler. only used 1/16 of the oil tank to one tank of fuel. another part which wouldn't be the end of the world if i didn't get cause it still works is the clutch for the 346. mine works but rattles like crazy. sounds like it's got a blown rod bearing. i replaced the springs on it which tightened it up but still noisy. seems the carrier and shoe slots are badly worn. i've got some stuff to trade.

I've got some of those parts as well...

 

[Big_Wood]

thanks for your generosity J.J. neal has me covered on what i need. i owe you guys both.

 

[Jordan3605]

Pro Mac 10-10.
Good Compression. Good Condition. Missing Plug Wire,Clutch Cover,Choke Linkage and chunk missing out of corner of Air Filter Cover (seen in pic)

 

[Jordan3605]

Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.

 

[jerrycmorrow]

Pro Mac 10-10.
Good Compression. Good Condition. Missing Plug Wire,Clutch Cover,Choke Linkage and chunk missing out of corner of Air Filter Cover (seen in pic)

and your point is??????

 

[jerrycmorrow]

Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.

ditto???

 

[Jordan3605]

Mac 10-10 . Right Hand Recoil. Started on direct fuel.

 

[Jordan3605]

need a parts 026 pro for clutch side parts.
also just looking to get these things to a good home

 

[Jordan3605]

and your point is??????

just offering these to an interested party thats all. thanks

 

[Jordan3605]

ditto???

ditto

 

[jerrycmorrow]

cool. its guys like you that make it hard for guys like me to keep my addiction under control. good on ya. Merry Christmas to you and your loved ones.

 

[kgip2k]

Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.

Message sent

 

[leecopland]

I'm working on a Homelite Super XL Automatic, for the pastor of my wife's home town. It needs a coil and filter cover. Anyone have one they would part with? Please PM me with a price. Thanks!

Have you found a filter cover yet? I have one which is OK but the fastening screw is separate but it works. Maybe you could swap your own thumb screw and keeper. The two rear corners are chipped but I don't think it would be a problem. Electronic coil or points? I have a points coil which didn't work for me so swapped it for an electronic one from an other saw. So I have coil, points box, and flywheel available. I'm not that good at checking these things so it maybe OK. Any of it is yours for postage.

Regards,

Lee

 

[Jacob J.]

Have you found a filter cover yet? I have one which is OK but the fastening screw is separate but it works. Electrionic coil or points? I have a points coil which didn't work for me so swapped from an other saw. I'm not that good at checking these things so it maybe OK. Any of it is yours for postage.

Regards,

Lee

I was working on getting him a cover but I am really not having any luck finding it.

 

[MS460WOODCHUCK]

I find myself needing a couple of check valves for the oilers to some micro poulans. This is the little nut behind the clutch. Pm me is you have any to let go.