Swap meet...

[ericjeeper]

Muffler for 7900

I need a new muffler for my 7900. If anyone has one to swap.. Thanks.,

 

[Saw Dr.]

029 lid

I ended up with an MS290 (flat top) with no airbox lid. I do have an extra recoil, complete and in good shape. Anyone have an 029 / 039, or flat top MS 290 /310 /390 airbox lid in good shape that they'd trade for the recoil or sell?

 

[Modifiedmark]

Echo trade?

I don't think I'll use this nice little Echo and was thinking of Ebaying it, but thought someone here might like to trade me another saw for it.

It's a very very nice CS-351VL, almost like new.

Watcha got?

 

[Chopwood]

I have some 3/4" Mall scratcher chain parts. Got them in a pile of parts I bought. Looking for 1/2 inch parts and roller nose bars or rollers.

 

[mattmc2003]

I want an 044 bad. Always have. I got a 6401 and a 025 to trade.

 

[blsnelling]

I've got a brake handle for a 064. It's in good shape other than a little chain rash on the left side.

 

[Jacob J.]

I want an 044 bad. Always have. I got a 6401 and a 025 to trade.

I know where there's a cherry 440. I can go and pick it up today. What kind of condition is your 6401 in?

 

[Jacob J.]

I've got a brake handle for a 064. It's in good shape other than a little chain rash on the left side.

I've got a like-new chain brake handle for 064 also, for the full-wrap style saws. I doubt at this point I'll ever have a use for it.

 

[treetrasher]

272

I have a 272 to trade/sell

DO YOU STILL HAVE THE 272

 

[heimannm]

I am looking for parts for an old McCulloch 3-25, specifically diapragms, carburetor parts, and the spring for the starter "clutch" (not the recoil spring).

I have lots of McCulloch saws & parts that could be bartered.

Mark

 

[Wet1]

I've got a like-new chain brake handle for 064 also, for the full-wrap style saws. I doubt at this point I'll ever have a use for it.

Hmmmm, my 064 (w/ full wrap) doesn't have a brake on it...

 

[Jacob J.]

I am looking for parts for an old McCulloch 3-25, specifically diapragms, carburetor parts, and the spring for the starter "clutch" (not the recoil spring).

I have lots of McCulloch saws & parts that could be bartered.Mark

Mark- if you want to e-mail me an IPL for 3-25 I'll bet I'll could come up with quite a few things...

Hmmmm, my 064 (w/ full wrap) doesn't have a brake on it...

What you got to trade? I have $30 into this brake as it sits.

 

[Wet1]

What you got to trade? I have $30 into this brake as it sits.

How about a dirty flee-bitten mule?

Let me look over the saw this weekend, I don't know if the handle was broken off or if there's even a brake in the cover.

Thanks JJ.

 

[epicklein22]

Looking for 066 parts....I have a newer style poly-flywheel style with a bad bottom end (sat around too long). Top end is good. Looks like it got hit by something as the plastic is cracked also.....

So I am in need of a:
Bottom end with a good crank
All Orange plastic
A chain brake handle, plus the small linkage part
handlebar
chain adjuster

I am open to buying a carcass.

As for trade, nothing special at the moment:
031 crank
031 clutch cover
031 top end
Stihl stump vise
Foley Belsaw chain grinder (new wheel for 325 and below)

 

[Bill G]

DO YOU STILL HAVE THE 272

It is still here

 

[Former Saw Builder]

It is still here

Bill what do you need to get out of the 272

 

[Jacob J.]

Looking for 066 parts....I have a newer style poly-flywheel style with a bad bottom end (sat around too long). Top end is good. Looks like it got hit by something as the plastic is cracked also.....

So I am in need of a:
Bottom end with a good crank
All Orange plastic
A chain brake handle, plus the small linkage part
handlebar
chain adjuster

I am open to buying a carcass.

As for trade, nothing special at the moment:
031 crank
031 clutch cover
031 top end
Stihl stump vise
Foley Belsaw chain grinder (new wheel for 325 and below)

I have the polymer flywheel-style bottom with a good crank. Do you need me to put a new case and seals in it? It has a new flywheel side bearing and the PTO side bearing was good in it. I also have a half-wrap handle, it's a bit rough. The case has a chain tensioner in it.

 

[epicklein22]

I have the polymer flywheel-style bottom with a good crank. Do you need me to put a new case and seals in it? It has a new flywheel side bearing and the PTO side bearing was good in it. I also have a half-wrap handle, it's a bit rough. The case has a chain tensioner in it.

So is this case split at the moment? I can split and install everything, but if you want to shoot me a pm with everything done, that would be nice.

 

[GrizzlyAdams86]

Need Husky L77 Carb

I could use help in locating a carb for a L77 Husky for a friend. He needs a HS121A carb, but this is all I know right now. Feel free to contact me w/questions! Thanks in advance!

 

[parrisw]

I could use help in locating a carb for a L77 Husky for a friend. He needs a HS121A carb, but this is all I know right now. Feel free to contact me w/questions! Thanks in advance!

Whatcha got to trade? Is the L65 the same carb?