Swap meet...

[dumbarky]

Dug thru my saw collections.

Oh by the way I have some pioneer 1074 stuff. Actually two complete saws disassembled. Also have two small homelite top handles XL super II's I believe. Willing to trade any or all off for parts compatible with my 371 Husqvarna. Just let me know what you got or want.

 

[Modifiedmark]

looking for parts for a homelite super ez. also any info trying to get this old thing running for my dad, he got it from an old friend 20 years ago or something but its in decent shape definitely needs a muffler. also is there only one super ez found srieal number but not sure if there is a moddle number.

If Andrew don't have what you need, let me know. I have some parts for them. I know I don't have the complete muffler, just the part that bolts to the engine plus I have a stack exhaust from a early E/Z.

I just today found that one has a good electronic ign on it.

 

[Modifiedmark]

Anyone need any Homelite XL400A parts?
Parts include a good muffler, recoil, clutch, rear handle assy, oil pump, ign, flywheel etc.

Got a bunch of smaller Pioneer saws and parts, mostly P28, 1074 and 1200A.

Got 2 P41 powerheads, one with compression and one without.

Will trade for whatever.

 

[treetrasher]

Jonsered 920

LOOKING FOR SOME JONSERED 920 PARTS:greenchainsaw:

 

[lamar_3704]

Anyone need any Homelite XL400A parts?
Parts include a good muffler, recoil, clutch, rear handle assy, oil pump, ign, flywheel etc.

Got a bunch of smaller Pioneer saws and parts, mostly P28, 1074 and 1200A.

Got 2 P41 powerheads, one with compression and one without.

Will trade for whatever.

Do you know what other saws the p41 parts will fit?? I've got a saw about that size thats missing a few parts.

Actually, I may need to use your expertise to help identifying it

 

[Jacob J.]

LOOKING FOR SOME JONSERED 920 PARTS:greenchainsaw:

What do you want/need for 920? I have a parts rig here that's 920. Maybe you'll trade for 394 parts?

 

[jimbo1490]

I'm converting my 371K over to a chainsaw. I need a bunch of stuff: oiler and parts, chain brake and parts, bar cover and chain tensioner parts, front handle, and clutch drum and sprocket. I have found some stuff at bailey's like piston and rings, crank bearings, seals and gaskets, but the others things like the chain brake and parts aren't available. Any help appreciated. Just PM me if you have anything you'll part with. I want to fix this old gal up right. I bought it new several years ago as a concrete saw and let my buddies borrow her to cut some concrete on a job. They couldn't get it started and took the air filter off and didn't get it back on right. So when they go her running guess what happened. They used her all day like that and when I got her back she had breathe concrete dust all day. They didn't realize the filter wasn't connected. Now she's barely got enough compression to run.

So this was years ago and now I need a big chainsaw now. I just can't let that saw sit around and collect dust any more. Oh I think I need a coil too, the ones that come on the K's are limited to 5700 rpm I think. So any help finding parts appreciated.

You can't beat the deal on an aftermarket bar cover from Bailey's. It comes as a complete assembly with side access chain tensioner and rubber chain guard for only about $35, IIRC.

Jimbo

 

[Modifiedmark]

Do you know what other saws the p41 parts will fit?? I've got a saw about that size thats missing a few parts.

Actually, I may need to use your expertise to help identifying it

I don't really know that much about the Pioneers. Post a picture int the Pioneer thread and those guys will be all over helping you with it.

 

[biggenius29]

066/660 flywheel

Looking for a 066/660 flywheel.

Trade
$$$$
Or let me know, I have friends in high, (more like low) places that have alot of orange stuff.

 

[treetrasher]

920

i need a handle and muffler thanks

 

[chainsawwhisperer]

Anyone need any Homelite XL400A parts?
Parts include a good muffler, recoil, clutch, rear handle assy, oil pump, ign, flywheel etc.

Got a bunch of smaller Pioneer saws and parts, mostly P28, 1074 and 1200A.

Got 2 P41 powerheads, one with compression and one without.

Will trade for whatever.

Mark,
I could use the clutch/drum.
Jim

 

[volks-man]

034

any chance someone would have an 034 gasket set, including case gasket?
also both crank seals?
and both crank bearings?

long shot..........................

 

[lwn9186]

Volks the 034 gasket set will come with seals, just bought one around 14.00. The flywheel bearing was 28.00.

 

[volks-man]

Volks the 034 gasket set will come with seals, just bought one around 14.00. The flywheel bearing was 28.00.

where'd you get that gasket set?
i looked on the ebay and only saw gasket sets without the seals and the seals were high. it was cheaper to buy a 026 set with seals and the 034gasket set than 034 seals plus gasket set!

thanks!

 

[Madsaw]

Looking for a front 1/2 wrap handle for a 088 or 084 for a friend.
Thanks
Bob

 

[lwn9186]

Volks gasket set from the dealer part number 1125 007 1050. (Changed)

 

[Jacob J.]

Volks gasket set from the dealer part number 1121 007 1050.

I think he's looking for the gasket + seal set for an 034? Which is 1125 007 1050. I just bought one two weeks ago for a guy- $17.

 

[lwn9186]

Your right Jacob I was looking at the 026.

 

[volks-man]

I think he's looking for the gasket + seal set for an 034? Which is 1125 007 1050. I just bought one two weeks ago for a guy- $17.

that's from the dealer eh?

oem it is!!!
thanks guys!


now about those 034 bearings..........................

 

[Modifiedmark]

Went through a few more things today and found some good stuff.

Got a complete electronic ign coil and flywheel for a Homelite EZ or Super EZ.

I also think I'm going to move this McCulloch Pro 10-10 project saw. A quick looks shows good compression and spark. Its just missing the chainbrake parts.

What you got to trade?