Swap meet...

[DSS]

I don't think there is such a thing, I've wondered about it. I was thinking about making a full wrap SXL out of two 1/2 wrap handle bars. Don't ask me why..???

Wondered that, but I'm sure I saw one somewhere. Maybe it was someone like you that made their own.? I think it would make a cool old saw even cooler.

 

[DSS]

I can ease your pain on the muffler.....er' make that cause you pain.

pm sent

 

[mdavlee]

Anybody want a mac d35? The muffler rusted off and it's locked up. Looks like everything else is there. I will give it away to someone who wants it.

 

[blsnelling]

Anyone have a choke knob for a Stihl 08 or S10? I need the plastic part that sticks up on the outside, as well as the metal keeper on the inside. I need a 08 clutch cover/oil tank as well.

 

[volks-man]

Anyone have a choke knob for a Stihl 08 or S10? I need the plastic part that sticks up on the outside, as well as the metal keeper on the inside. I need a 08 clutch cover/oil tank as well.

i have a cover. the red one has a repair at the upper tube handle. the white one looks o.k. but is 'as is'. if you want the handle too i will need to know.

i am open to any trades involving:
036 brake handle
036 top handle
036 recoil
036 muffler
036 clutch cover. good metal, paint doesn't matter

026 filter cover. old style, must be faded and ugly but not broken.

038 clutch cover. (no side adjuster hole) good metal, paint doesn't matter.
038 muffler, rear half with two ports.

PM me any time.


<a href="http://s263.photobucket.com/albums/ii150/volks-man/?action=view&current=PICT2301.jpg" target="_blank"><img src="http://i263.photobucket.com/albums/ii150/volks-man/PICT2301.jpg" border="0" alt="Photobucket"></a>

 

[Saw Dr.]

i have a cover. the red one has a repair at the upper tube handle. the white one looks o.k. but is 'as is'. if you want the handle too i will need to know.

i am open to any trades involving:
036 brake handle
036 top handle
036 recoil
036 muffler
036 clutch cover. good metal, paint doesn't matter

026 filter cover. old style, must be faded and ugly but not broken.

038 clutch cover. (no side adjuster hole) good metal, paint doesn't matter.
038 muffler, rear half with two ports.

PM me any time.


<a href="http://s263.photobucket.com/albums/ii150/volks-man/?action=view&current=PICT2301.jpg" target="_blank"><img src="http://i263.photobucket.com/albums/ii150/volks-man/PICT2301.jpg" border="0" alt="Photobucket"></a>

I just scored a load of 026 parts. I think I gotcha covered on the filter lid. That is the one with the wire pre-filter screen at the top, isn't it?

 

[Saw Dr.]

I'm debating on rebuilding this Husqvarna L65 that I have here. If I do I will need a front handle and oil pump cover for sure.

Anyone got any 65 parts laying around?

Is your front handle missing or bent? I know I have a handle, but I think it needs some tweaking. I'll check on the pump cover tomorrow if you haven't already found one.

 

[volks-man]

I just scored a load of 026 parts. I think I gotcha covered on the filter lid. That is the one with the wire pre-filter screen at the top, isn't it?

i think it should have a filter screen. to be honest i don't really know.
i don't have one to look at to tell you.

let me know what you've got.

i hope it's faded and ugly... fingers crossed.

edit: yes, the ipl says i need the one with prefilter mesh and round knob.

 

[willis09r]

i know the 024 filter lid has a wire screen in the top, but I can't remember
if the 026 does and I don't have one any more to check.

 

[Saw Dr.]

i think it should have a filter screen. to be honest i don't really know.
i don't have one to look at to tell you.

let me know what you've got.

i hope it's faded and ugly... fingers crossed.

edit: yes, the ipl says i need the one with prefilter mesh and round knob.

Don't worry, I'll be sure to pick the ugliest most faded one just for you

 

[volks-man]

Don't worry, I'll be sure to pick the ugliest most faded one just for you

i am quite serious about the 'ugly and faded' part.

i am hoping to get one that matches the rest of the saw. a shiny new one would look really bad.

keep me posted.


edit:
check out this 034/036 filter cover a guy traded me. perfect match for the top cover i already had!!!

 

[Saw Dr.]

i am quite serious about the 'ugly and faded' part.

i am hoping to get one that matches the rest of the saw. a shiny new one would look really bad.

keep me posted.


edit:
check out this 034/036 filter cover a guy traded me. perfect match for the top cover i already had!!!

I can do much worse (better?) than that. A couple of them are almost grey.

 

[terry2tmd]

McCulloch 125

I know I am not the only guy out there looking but I got a urge to run the biggest and the baddest, so I am looking for a McCulloch 125 running or not( so long as the not doesn't mean trashed), anybody got anything please PM Me.

 

[volks-man]

I can do much worse (better?) than that. A couple of them are almost grey.

heres what i want to match.
same saw in both pics, one is inside light and one outside. some of the ugliness is overspray from black spraypaint...?????

<a href="http://s263.photobucket.com/albums/ii150/volks-man/?action=view&current=PICT2305.jpg" target="_blank"><img src="http://i263.photobucket.com/albums/ii150/volks-man/PICT2305.jpg" border="0" alt="Photobucket"></a>

<a href="http://s263.photobucket.com/albums/ii150/volks-man/?action=view&current=PICT2303.jpg" target="_blank"><img src="http://i263.photobucket.com/albums/ii150/volks-man/PICT2303.jpg" border="0" alt="Photobucket"></a>

 

[Modifiedmark]

Is your front handle missing or bent? I know I have a handle, but I think it needs some tweaking. I'll check on the pump cover tomorrow if you haven't already found one.

Never mind the handle, I was able to straighten the one I had.

I was debating rebuilding this one but I think I will so I will need a oil pump cover.

Let me know if you find it. I got a mini mac here with your name on it. LOL

 

[dumbarky]

Looking for parts for a 371, 372 husky

I'm converting my 371K over to a chainsaw. I need a bunch of stuff: oiler and parts, chain brake and parts, bar cover and chain tensioner parts, front handle, and clutch drum and sprocket. I have found some stuff at bailey's like piston and rings, crank bearings, seals and gaskets, but the others things like the chain brake and parts aren't available. Any help appreciated. Just PM me if you have anything you'll part with. I want to fix this old gal up right. I bought it new several years ago as a concrete saw and let my buddies borrow her to cut some concrete on a job. They couldn't get it started and took the air filter off and didn't get it back on right. So when they go her running guess what happened. They used her all day like that and when I got her back she had breathe concrete dust all day. They didn't realize the filter wasn't connected. Now she's barely got enough compression to run.

So this was years ago and now I need a big chainsaw now. I just can't let that saw sit around and collect dust any more. Oh I think I need a coil too, the ones that come on the K's are limited to 5700 rpm I think. So any help finding parts appreciated.

 

[roncoinc]

Ah-47

needing an air filter and cover for an AH-47 engine in my old sears u4g..
only thing to trade is some older small stihl stuff and not much of it.
tnx..

 

[mbayer]

looking for parts for a homelite super ez. also any info trying to get this old thing running for my dad, he got it from an old friend 20 years ago or something but its in decent shape definitely needs a muffler. also is there only one super ez found srieal number but not sure if there is a moddle number.

 

[epicklein22]

looking for parts for a homelite super ez. also any info trying to get this old thing running for my dad, he got it from an old friend 20 years ago or something but its in decent shape definitely needs a muffler. also is there only one super ez found srieal number but not sure if there is a moddle number.

I have one laying around. No handle bar and the bar is shot. I wouldn't mind selling the entire saw....

 

[Johndirt82]

I need a MS660 tank handle assy. part# 1122 350 0817
Looking for something excellent to new condition.
thanks all.