Swap meet...

[Mastermind]

Looking for an XL-12 air filter cover.

 

[DSS]

Looking for an XL-12 air filter cover.

I'll send you one Randy if I can find it. Give me a day to look.opcorn:

 

[Saw Dr.]

Anyone have a MS390 cylinder? I also am looking for a set of 044/440 cases. Just need a set that can take a 12mm crank. Does not have to be pretty of have bearings or anything.
Thanks
John

You're the second guy this week looking for a 390 jug. I would think the aftermarket would catch on to this. Nothing to offer right now but if I find one, do you need decomp valve, or plain 039 style? If you're not picky about the oil cap, you should be able to find a set of 044 cases pretty easy. It took me 6 months to find a decent set of 440 ones used. JJ should be along to confirm, but I believe you can use your 12mm crank in any 044 cases. I have not split a 10mm saw yet, though.

 

[Guido Salvage]

I'm looking for a Poulan 306SA or 245SA clutch cover.

Wish I could help. Went with a buddy of mine to a junk yard last weekend and found a 306 there. Turns out the sheriff had raided the place the week before and arrested the owner for accepting stolen property. Until further notice, nothing leaves the yard.

 

[bigjohnston]

picked up a stihl s10 the other day so its up for trade fodder

its missing the top cover and i think the kill switch, looking to trade for dolmar jonsered or husqvarna part saws or parts

 

[Modifiedmark]

Wish I could help. Went with a buddy of mine to a junk yard last weekend and found a 306 there. Turns out the sheriff had raided the place the week before and arrested the owner for accepting stolen property. Until further notice, nothing leaves the yard.

Well keep me in mind and that it has to be a power sharp cover.

Thanks.

 

[Mastermind]

I'll send you one Randy if I can find it. Give me a day to look.opcorn:

Thanks Chris. You are the man.

 

[Guido Salvage]

Well keep me in mind and that it has to be a power sharp cover.

There is a whole saw on the bay now (3 day auction) with the power sharp system (though the knob is missing).

 

[sefh3]

I just reassembled a box of Homelite XL12 and come up with a blue runner and a red runner but it's missing everything on the clutch side. I have lots of PM-605-610 parts plus some other odds and ends to trade.

 

[Modifiedmark]

There is a whole saw on the bay now (3 day auction) with the power sharp system (though the knob is missing).

I saw that, I have all the parts to put in the cover though. My 306SA is a later one with the better decomp.

 

[Mastermind]

I just reassembled a box of Homelite XL12 and come up with a blue runner and a red runner but it's missing everything on the clutch side. I have lots of PM-605-610 parts plus some other odds and ends to trade.

I probably have what you need. I make sure in the AM.

 

[sefh3]

I probably have what you need. I make sure in the AM.

Cool let me know what you have and what you need.

 

[bigbadbob]

Am looking for a Shindiawa tank vent cover.
Its for a 345 but i think up to a 500 model will fit.
TIA
Bob

 

[TRI955]

Am looking for a Shindiawa tank vent cover.
Its for a 345 but i think up to a 500 model will fit.
TIA
Bob

I might have what you need, just not too sure what your looking for? Is this the black rubber plug that goes into the top of the fuel tank?

 

[fredmc]

I can get NOS 064 orange metal carb/filter flanges there are one or two.
Who needed 034 stuff? I saw a complete parts saw today. A used running 385xp I have pics for later and an 024 parts saw I have pics for.

AND...

A cherry 262xp that I got for myself.:greenchainsaw:

 

[Mastermind]

I might have what you need, just not too sure what your looking for? Is this the black rubber plug that goes into the top of the fuel tank?

I have some Shinny parts as well, from a 416

 

[mdavlee]

I can get NOS 064 orange metal carb/filter flanges there are one or two.
Who needed 034 stuff? I saw a complete parts saw today. A used running 385xp I have pics for later and an 024 parts saw I have pics for.

AND...

A cherry 262xp that I got for myself.:greenchainsaw:

What about the 385xp? Pictures, price, etc.

 

[fredmc]

What about the 385xp? Pictures, price, etc.

PM sent

 

[DSS]

Looking for an XL-12 air filter cover.

ask and ye shall recieve.....problem solved

 

[bigbadbob]

I might have what you need, just not too sure what your looking for? Is this the black rubber plug that goes into the top of the fuel tank?

Part number 6 and 9 and 10 if you have them.
9 and 10 are off the oil tank.
5,6,7 are the actual vent.
Bob