Swap meet...

[epicklein22]

does it got 031 break hows top end

031 is long gone. Sorry.

 

[Saw Dr.]

I got a 288 xp parts saw that I'm looking to trade for a dolmar 115 top end or a dolmar ps7300 top end used or new. Can somebody gimme some help?

I may be able to help on the 7300 stuff. What's the 288 look like?

 

[Bowtie]

I might be looking for 064 parts. I have one coming that has a spare case, crank and bearings. I should have a spare piston, and I have a cylinder, but basically would need the rest to make a 3rd 064.

What I have to trade is a bunch of misc. stuff, and I do have a completely rebuilt 026 Pro that got new crank bearings, crank seals, OEM piston and cylinder, fuel line, impulse line, and oil pump worm gear. I really dont want to part with this 026, its a damn nice saw, but the 064's are calling my name.

 

[Sawdustmaker]

A freind of mine really loves his old Pro Mac 850. Last week it had a ring snag. He wants it running again. Does anyone have a 850 p/c?

 

[Saw Dr.]

A freind of mine really loves his old Pro Mac 850. Last week it had a ring snag. He wants it running again. Does anyone have a 850 p/c?

Good luck, the last few of those I saw on Epay have gone for almost as much as a running saw.

 

[yo2001]

Looking for 036 or 034 super P&C. I have a running 028WB, it needs crankside seal or something. Every now and then, the saw stalls with the flywheel side up. Still have 011AVE, needs P&C and the rod bearing.

 

[Sawdustmaker]

the 036 and the 034s have differences in mufflers and the connection between case and muffler. you need the muffler that goes with the cylinder.

 

[Trigger-Time]

the 036 and the 034s have differences in mufflers and the connection between case and muffler. you need the muffler that goes with the cylinder.

Not 100% true, I have 036 muffler on 034 jug. If I remember right I had
to use 1122 145 1200 flange, which is also used when swaping back side
of mufflers on older 064/066

TT

 

[doc874]

Not 100% true, I have 036 muffler on 034 jug. If I remember right I had
to use 1122 145 1200 flange, which is also used when swaping back side
of mufflers on older 064/066

TT

+1 . Yep, it will fit with the flange, i have one here.

 

[Sawdustmaker]

Not 100% true, I have 036 muffler on 034 jug. If I remember right I had
to use 1122 145 1200 flange, which is also used when swaping back side
of mufflers on older 064/066

TT

Yeah i bent the back of a 036 muffler so that it fit with the 034 super jug one time but it was not what i would do again. No where close to a god fit.
I did not know there was a flange. thanks i my use it someday.

 

[epicklein22]

Alright, got some parts to trade and I need quite a bit....lets do some wheeling and dealing....cash can be thrown in for differences.

For trade:
2 stihl ms192 clutch covers
034/036 gas tank
Lots of 026 and 034/036 stuff
044 air filter cover
021/023/025 clutch covers (new, just dusty)
021/023/025 clutch drums
012 crankcase and other parts
012 stihl chainsaw, runs good, needs nothing
homie 925xl, kinda runs, need to dig into it more....
Stihl/echo/etc trimmer heads
husky 371/372 handle bar
husky 268/272 handle bar
husky 50 chain adjuster
husjy 372 air filter

What I need:
clutch covers for an 036
361 crankcase or a 361 parts saw
200t carb
And anything else interesting, I love project saws

Updated the quote....

 

[backwoods12]

bars

Here is a couple pics of these bars.

the 16 is 3/8 or .325 .50? pm me

 

[litefoot]

I need a clutch cover and the attached dog for a 660.

I have everything you might need for an 025 except piston /cylinder including excellent condition plastic. I also have Solo 655 parts.

 

[andosca]

266

looking for carb(tillotson hs163), bucking spikes, 20" or 24" bar and chain, possibly more for a husky 266se. i have a jonsered 455 parts saw(no bar, recoil starter, air filter and no idea of the condition of the rest because i havent really checked.) also a mac 1635 that i havent checked out either but is in pretty rough shape, it does have a 16" bar and chain.

 

[84toyota]

I still have the shindaiwa 757 listed in the trading post for sale. Figured I would see if anyone wanted to trade it for any pioneer P series parts or a whole P series saw, would throw in cash for difference. May consider other saws.

Thanks,

84toyota

 

[Jacob J.]

I still have the shindaiwa 757 listed in the trading post for sale. Figured I would see if anyone wanted to trade it for any pioneer P series parts or a whole P series saw, would throw in cash for difference. May consider other saws.

Thanks,

84toyota

I've got three pallets of Pioneer P-series parts and a couple parts saws I'll trade. Is there a specific model you're looking for?

 

[Trigger-Time]

Looking for a nice 064/066 HD air filter cover.....I guess it would be the one
repaced the flat filter.

I do have trading stuff, manly Stihl, some husky

 

[yo2001]

Looking for a nice 064/066 HD air filter cover.....I guess it would be the one
repaced the flat filter.

I do have trading stuff, manly Stihl, some husky

I see how you are going to be. :monkey:

I would like to take the older flat filter setup if you are going to get rid of. Thanks

 

[Trigger-Time]

I see how you are going to be. :monkey:

I would like to take the older flat filter setup if you are going to get rid of. Thanks

I only have one flat filter set up and it's on a 064, this is for another keeper

TT

 

[84toyota]

Jacob, PM sent, thanks for your quick reply!

84toyota