Swap meet...

[sachsmo]

McCulloch 10-10 clutch needed,

Hub on mine cracked at the keyway, have stuff to trade.

Thanks,

mo

 

[parrisw]

Hey Guys,

I'm in need of some Misc Stihl bolts (recoil, muffler, etc...) I have an 041 that I'm working on that likes to vibrate them loose.

I'd love a few spares

some Husky bolts would be cool too I seem to have a couple recoils where someone backed out the screws that don't fall out

let me know what YOU need. (have lots of old stihl/husky/jred parts...



OH!!!! I Also need 2 AV mountS for the UPPER handle of A 70e JONSERED...

tHANKS :CHEERS:

Jay

Hey Jay, your best bet to keep screws in that 041 is to use the new style torx bit screws, that have a knurling on the back of them that really helps hold them in. But if your in need I'm sure I have some screws that will work for ya, they are probably a slot screw right? I need to know size and length though.

 

[volks-man]

i need an air filter for 034/036. fleece or flocked, new or used, doesn't matter as long as it is serviceable. must be overnighted to me (for use at a gtg)!!!
needs to be the older style for use with tall tank vent and no compensator.

i will trade a brand new, unused 036 newer style filter. and may kick in some of the overnight charges (depends on filter condition).

if i can sweeten the pot to get this done let me know how!!!

i'm still trying to locate one locally tonight (calling around).

anyone?

 

[tmessenger]

I have a handle for a 018 I think it's the same as the 180.

Tim

My handle turned out to broken also so no help, sorry.

 

[parrisw]

i need an air filter for 034/036. fleece or flocked, new or used, doesn't matter as long as it is serviceable. must be overnighted to me (for use at a gtg)!!!
needs to be the older style for use with tall tank vent and no compensator.

i will trade a brand new, unused 036 newer style filter. and may kick in some of the overnight charges (depends on filter condition).

if i can sweeten the pot to get this done let me know how!!!

i'm still trying to locate one locally tonight (calling around).

anyone?

Well I might have an air filter, but there is no way in hell I can overnight it to you. LOL You know where I live!

 

[volks-man]

Well I might have an air filter, but there is no way in hell I can overnight it to you. LOL You know where I live!

drive down to the border and overnight it from there!
is that so much to ask?


you know i'd just go ahead and get it from you if i weren't in a big rush to get it before i leave friday night for the 'eastern pa gtg'. (i don't have a filter that fits it at all)
if i still don't have it after this weekend you and i can make a deal.

 

[parrisw]

drive down to the border and overnight it from there!
is that so much to ask?


you know i'd just go ahead and get it from you if i weren't in a big rush to get it before i leave friday night for the 'eastern pa gtg'. (i don't have a filter that fits it at all)
if i still don't have it after this weekend you and i can make a deal.

Sure just let me know. I'll have to look though. Not sure if I got one or not, I got a box full of filters. Murphy says that's probably the one I don't have.

How's the hybrid project going?

 

[volks-man]

Sure just let me know. I'll have to look though. Not sure if I got one or not, I got a box full of filters. Murphy says that's probably the one I don't have.

How's the hybrid project going?

it lacks one part.
you'll never guess which part.

i wanted to unveil it at the PA gtg. then i'll post my giant how-to thread complete with vids of it cutting at the gtg.
this is why i am in such a rush the filter.

 

[parrisw]

it lacks one part.
you'll never guess which part.

i wanted to unveil it at the PA gtg. then i'll post my giant how-to thread complete with vids of it cutting at the gtg.
this is why i am in such a rush the filter.

ha ha. Well, crap. Well, ya know it might be possible to overnight it from here, but at a cost$$$$$$$$ I still don't know even if I have one.

I'd really like to hear about the project!!

 

[SawGarage]

Hey Jay, your best bet to keep screws in that 041 is to use the new style torx bit screws, that have a knurling on the back of them that really helps hold them in. But if your in need I'm sure I have some screws that will work for ya, they are probably a slot screw right? I need to know size and length though.

I agree with using the new style fasteners...and the BLUE LOCK-TITE!!!!

slot screw?? That's what vibed out....but NOT ANYMORE!!! I stole the recoil, and top cover screws from my 044 that won't be done for a week...so this 041 can go back to work and make some money for Eric.

so I need some recoil screws I think they are 5mm x 15mm, top cover 5mm x 20mm, and a pair of muffler bolts (I think the lowers are 6mm x 20??

I could use a 044 chain catch, and a tank protector for an 066 too. not to be greedy but, like the spring, it's something small, someone's gota have, and the dealer (30 min away) wants too much for... I'd rather trade stuff.

i need an air filter for 034/036. fleece or flocked, new or used, doesn't matter as long as it is serviceable. must be overnighted to me (for use at a gtg)!!!
needs to be the older style for use with tall tank vent and no compensator.

i will trade a brand new, unused 036 newer style filter. and may kick in some of the overnight charges (depends on filter condition).

if i can sweeten the pot to get this done let me know how!!!

i'm still trying to locate one locally tonight (calling around).

anyone?

There isn't a dealer between YOU and the GTG that would have a filter??? that would surprise (seriously agitate) me if it's the case

J

 

[parrisw]

I agree with using the new style fasteners...and the BLUE LOCK-TITE!!!!

slot screw?? That's what vibed out....but NOT ANYMORE!!! I stole the recoil, and top cover screws from my 044 that won't be done for a week...so this 041 can go back to work and make some money for Eric.

so I need some recoil screws I think they are 5mm x 15mm, top cover 5mm x 20mm, and a pair of muffler bolts (I think the lowers are 6mm x 20??

I could use a 044 chain catch, and a tank protector for an 066 too. not to be greedy but, like the spring, it's something small, someone's gota have, and the dealer (30 min away) wants too much for... I'd rather trade stuff.







There isn't a dealer between YOU and the GTG that would have a filter??? that would surprise (seriously agitate) me if it's the case

J

I don't have many of the new style fasteners, I got lots of the old ones. I wont have the chain catch or the tank protector. I'll check on the screws.

 

[volks-man]

There isn't a dealer between YOU and the GTG that would have a filter??? that would surprise (seriously agitate) me if it's the case

J

yes there are.
i have called the two nearest. 1/2 hour ride and 1 hour ride. no luck.
i will be calling the next nearest today.
i have also sent out a pm to a dealer on this site that will be driving past in PA, good guy, you all know him as paul001.
if all else fails i will call dealers in PA near where i will be saturday.

problem is that it is the older filter and the don't seem to have any oldies left.

 

[SawGarage]

yes there are.
i have called the two nearest. 1/2 hour ride and 1 hour ride. no luck.
i will be calling the next nearest today.
i have also sent out a pm to a dealer on this site that will be driving past in PA, good guy, you all know him as paul001.
if all else fails i will call dealers in PA near where i will be saturday.

problem is that it is the older filter and the don't seem to have any oldies left.

DAYYYUM!!! wish I could help!! (and like you, i'm sure...) wish it was the 044/066 filter!!!

 

[SawGarage]

2100 ETC recoil

I need a recoil for a 2100, etc...

not gonna complain if the rope needs changing

J


for a local small dealer's personal saw i'm tryin to hep him with

J

 

[tifnbrian]

homelite super xl

hi everyone im looking for 2 spikes or dogs for a homelite super xl. if you have one laying around let me know what you want for it. thanks

 

[redray46]

Swap meet

I am looking for a 20 or 24 inch bar for my Dolmar 7300.It takes a large mount Husky pattern,3/8s pitch,.050 gauge.The 20 has 72 links and the 24 has 84.I have a number of Husky bars,28 and 32's ,some new chains(let me know what you need)and many Stihl 028 parts.

Some Stihls,Huskys,Echos and now a Dolmar.

 

[upstateny]

redray46 I've got a windsor that needs a tip 20" large husky mount.

 

[volks-man]

I am looking for a 20 or 24 inch bar for my Dolmar 7300.It takes a large mount Husky pattern,3/8s pitch,.050 gauge.The 20 has 72 links and the 24 has 84.I have a number of Husky bars,28 and 32's ,some new chains(let me know what you need)and many Stihl 028 parts.

Some Stihls,Huskys,Echos and now a Dolmar.

i have a 20" 3/8 0.50 forester sprocket tip with very little use on it.
it came with my dolbaby 7900).

i'd swap it for something.

what brand, type of chains do you have to swap in 18", 20", 28" 3/8 0.50?
have you a known good walbro carb for 028?

edit:i just saw the above post....
not trying to step on any toes here.

 

[volks-man]

i have my 036 filter covered.

thanks all!

 

[Brian VT]

I need a recoil for a 2100, etc...

Homelite ?