Swap meet...

[stihlboy]

Is she looking for a horse?Or a smaller tiller?
I have a 1978 horse with a 2002 8 horse briggs on it ..Motor might have 5 hours on it..

my cousin fixed my moms tiller but my grandma's is still broke but we are working on it.... looking for a stihl 039p&c
i have
1:ryobi 990 longblock
2:craftsman 2.3 longblock
3: used stihl farmboss 18'' bar .325 .63ga
4: stihl 028WB anti vibe mount

 

[treetrasher]

husky 50 and 335

for parts some good ones

 

[wigglesworth]

I need an 8 hp briggs engine for a troy bilt horse tiller. I know its not chainsaw related, but i do have a couple I would trade. I have a strong runnining poulan 3400 145psi comp, 2 20" bars and prob 3 chains or so. Also have a completly gone thru 011 AVT. It has new seals, bearings, rings and is a strong runner. Comes with a 16" bar and stihl chain. I dont want to get rid of these saws, but i need a tiller motor to finish the season. I will buy a motor outright for the right price too.

 

[StihlGuitar]

hay i have a husky 50 any one need parts let me knowopcorn:

what are you askin for it? I have a 50 special with new piston and rings that is having undiagnosed fuel related problems..

 

[mowoodchopper]

Anyone have a set of dogs for a 034, I have the inner dog but would like to have the one for the clutch cover!

 

[fredmc]

for parts some good ones

Is the piston and cylinder in good shape on the 50?

 

[fredmc]

husky 61's

Anyone interested in a couple of 61's? they both run. pm me

 

[fredmc]

mac 73

Any one want a McCulloch 73? pm me

 

[sefh3]

Any one want a McCulloch 73? pm me

I sent you a PM on this saw.

 

[sefh3]

I need an 8 hp briggs engine for a troy bilt horse tiller. I know its not chainsaw related, but i do have a couple I would trade. I have a strong runnining poulan 3400 145psi comp, 2 20" bars and prob 3 chains or so. Also have a completly gone thru 011 AVT. It has new seals, bearings, rings and is a strong runner. Comes with a 16" bar and stihl chain. I dont want to get rid of these saws, but i need a tiller motor to finish the season. I will buy a motor outright for the right price too.

Does it have to be a Briggs? I think I have a 8hp Tecumseh that I would sell. It's an older one but runs good.

 

[Chris Crouse]

Mini Mac in Colorado

If anyone in Colorado, the Denver area especially, has any Mini Macs they want to part with I am interested.

 

[sloch24]

I have a complete ms290 engine. The cylinder and piston are scored, and the bearing in the wrist pin (inside the piston) is shot. The crank, seals, bearings, and engine pan are good.

 

[treetrasher]

Is the piston and cylinder in good shape on the 50?

thay are scord looks like it can be cleaned up

 

[sefh3]

TS350 Cut off Saw

I have a TS350 Super that I would trade for a bigger Stihl or Husky chainsaw.

 

[yooper]

Any one have any used Mcculloch 3200 parts saw is 10 to 15 years old I need an ignition coil for my F.I.L. part no. is MC-9288-310001 I can get it here new around here for about 35-40 bucks but times are tuff and would like to find it allot cheaper for him if I can. PM me if you have a used part and give me a price please thanks.

 

[Saw Dr.]

Any one have any used Mcculloch 3200 parts saw is 10 to 15 years old I need an ignition coil for my F.I.L. part no. is MC-9288-310001 I can get it here new around here for about 35-40 bucks but times are tuff and would like to find it allot cheaper for him if I can. PM me if you have a used part and give me a price please thanks.

There are several of those 'out back at my favorite Stihl dealer. I won't be able to check until the weekend, but I can probably get ya fixed up cheap.

 

[yooper]

There are several of those 'out back at my favorite Stihl dealer. I won't be able to check until the weekend, but I can probably get ya fixed up cheap.

Thanks, all the dealer has here is older Macs. nothing with the used part I am looking for.

 

[ericjeeper]

I need an 8 hp briggs engine for a troy bilt horse tiller. I know its not chainsaw related, but i do have a couple I would trade. I have a strong runnining poulan 3400 145psi comp, 2 20" bars and prob 3 chains or so. Also have a completly gone thru 011 AVT. It has new seals, bearings, rings and is a strong runner. Comes with a 16" bar and stihl chain. I dont want to get rid of these saws, but i need a tiller motor to finish the season. I will buy a motor outright for the right price too.

Do you need a 3/4 inch shaft?those old troybilts often used a smaller crankshaft.I converted my 6 horse tejunksa horse to an 8 horse briggs.. Good thing the lady at the store knew enough to order the right crank sized briggs.

 

[mowoodchopper]

How about those stihl 034 outer dogs? Does anybody have them? Or know where to get some? I looked on baileys no luck.

Heck how about a cherry 034 with 2 bars and a few chains. New rings.
Saw runs exc, anybody got a nice dolmar or husky to trade!

 

[wigglesworth]

Do you need a 3/4 inch shaft?those old troybilts often used a smaller crankshaft.I converted my 6 horse tejunksa horse to an 8 horse briggs.. Good thing the lady at the store knew enough to order the right crank sized briggs.

yea, 3/4 shaft. Mine is electric start, but I still have my motor, starter, flywheel and stator so I can retrofit if I find a flathead briggs. I have found some 6.5 OHV motors, but no electric start. They want $250 for a new 6.5 OHV